Originally Posted by Dirtboy View Post
I think I figured out my problem. The remote out on my OEM BMW deck wasn't putting out enough voltage; 11.5v. To test it, i hooked the MS8's remote-in to 12.6v and I never had the restarts. So all is good now. I just have to fine tune the system in a quite area (too much street noise where I am).
The calibration sweeps are almost impervious to external noise, but be sure to run calibration at a pretty low level.

For those of you who are sick of waiting for me to tell you how loud the sweeps should be, we finally have another unit in a car in the office and we'll run a bunch of tests in a couple of weeks when i return from traveling. Also investigating the occasional "lack of midbass" claim.