Wrapper

[cvjoint]

PPI Phantom P1000.1



Used but tested OK by PPI team



$160 Shipped with insurance Cont. US:



Shipping Terms Different outside of Cont. US :



Uses the same board design as the Polk D series and potentially the Hertz HDP. Said to bench at over 1200w @1ohm.

Good combo of miniature heatsink, high efficiency, loads of power.

Phantom Series Class D monoblock

RMS power Rating (14.4V):
4 ohms: 580 watts x 1 chan.
2 ohms: 725 watts x 1 chan.
1 ohm: 1,000 watts x 1 chan.
RMS power Rating (12V):
4 ohms: 395 watts x 1 chan.
2 ohms: 525 watts x 1 chan.
1 ohm: 785 watts x 1 chan.
MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Variable Bass Boost (0 to +12 dB bass boost at 50 Hz)
On/Off circuit delay
Mono channel operation
Preamp rca outputs to daisy chain multiple amps
3-Way System Protection circuitry
SMT Circuitry
Composite double sided epoxy PCB
Heavy duty aluminum alloy heatsink for extreme heat dissipation
Nickel-plated rca level inputs
Nickel-plated screw terminals
Input sensitivity:
Low level: 200mV-6V
Variable low-pass filter (40-220 Hz, 12 dB/octave)
Subsonic filter (20-38 Hz 12dB/octave)
Damping factor: >91
Dimensions: 12-15/16"L x 6-3/4"W x 2"H
4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.

Link to manuf. data:
PrecisionPower - Products - Amplifiers - Phantom - P1000.1

The amp is at PPI so I can't take pics. It's 8.5/10 cosmetically. It comes with the remote.







** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------

Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recomend that you:

1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.

DO NOT proceed with a deal until you are completely satisfied with the other party.

DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.