Wrapper

[fej]

I can't afford to lose the foot room in relation to the clutch.

I have some HAT Legatia L6 with pro tweet components I was planning on running, and picking up the L4 that should be able to pick up around 180hz at 24db.

I plan to almost flush mount the L4 and tweet, possibly adding 1/2" and tapering it towards the firewall if I had to. But the footwell is not very large in these cars, and high beams work via a floor mounted switch in the top left corner of the dirvers side etc.

There is basically zero chance of fitting a 5.25", let alone a 6.5" without bringing the kickpanel out towards the pedals a bunch, which I really don't want to do.

They have some really cheesy 6.5" coaxials that come preformed in kicks with about a 1.25" bump in them, and come with tiny magnets. And they look like @$$. Just can't do that and ever be happy, let alone even satisfied.

Thanks for the reply