Quote:
Originally Posted by Boostedrex
My midbass can play up to 1KHz cleanly.  I'll experiment with the Trinity when I get my turn. But I'd like to stay between 250-300Hz if at all possible. This is with the mid in a .9L sealed pod. |
In the .9L sealed you can go down to 200hz and be fine. But watch you power running them down that low. As with any small driver; the lower you play them the less power you can throw their way. Also it does have a small adverse affect on the detail in the higher midrange of the driver. I have test a ton of small drivers and this hold true for everyone I have tested. This includes drivers sizes from 2" - 7".
If your mid/bass can play to 1khz without a problem 300-400 would be a better point as captainobvious stated; as the resolution and detail would improve a bit from the small driver not having to extend low and use so much of its excursion. Not that is will sound bad or anything like that is just what I have notice from testing so many drivers. The less work the driver has to do the better the detail.