superstudinor
04-10-2006, 05:43 AM
Gear is in my sig.
1. My amp puts out 75x4 at 14 volts, and my charging sytem never goes below 14. I need to know, using the DMM to set my gains, what wattage I should send to my 180's and 28A's respectively.
2. I need some starting crossover frequencies and slopes, considering i cross the sub at 100hz, with a 24db slope.
3. Max volume I should set my deck at when setting the gains on the amp, to prevent the deck from clipping.
4. My mids will be at the bottom of the door, right next to the kickpanels, and I won't be able to mount the tweeters in the A pillar, so they'll have to reside in the door panel. Where would be a good spot for them. Top of panel next to the dash, or further down the panel, close to the mids?
Everyone's answers will be appreciated.
1. My amp puts out 75x4 at 14 volts, and my charging sytem never goes below 14. I need to know, using the DMM to set my gains, what wattage I should send to my 180's and 28A's respectively.
2. I need some starting crossover frequencies and slopes, considering i cross the sub at 100hz, with a 24db slope.
3. Max volume I should set my deck at when setting the gains on the amp, to prevent the deck from clipping.
4. My mids will be at the bottom of the door, right next to the kickpanels, and I won't be able to mount the tweeters in the A pillar, so they'll have to reside in the door panel. Where would be a good spot for them. Top of panel next to the dash, or further down the panel, close to the mids?
Everyone's answers will be appreciated.