Socal Meet on April 5th at Autobachs

[BigRed]

Hey guys, what do you think about another meet on April 5th? Chime in if you can make it. :)

[BigRed]

by the way, just heard Michaels car since switching amps for midbass. Is it better......ahhhhh....YES!! He should be there at the meet. Have a listen :)

[Buzzman]

Count me in!! Perfect weekend for me.

[cvjoint]

I'm in

[drake78]

I'm game

[monkeyboy]

I can make that. If things go as planned, the truck will be bare though:cool:

[fredridge]

hmm.. sounds good, I think I can make it and there is a possibility that I could be active by then... I just need to get a third amp and then figure out how to reconfigure my install... I have no woodworking experience or tools right now.

[rawdawg]

by the way, just heard Michaels car since switching amps for midbass. Is it better......ahhhhh....YES!! He should be there at the meet. Have a listen :)

Hmm.... So all that fluffy talk about matching sonic signatures actually panned out? I can't wait to hear it.

[OgreDave]

I'll try to make it .. dunno that far ahead yet :)

[fit_tuner]

i should be able to make it as well, and hopefully /w new mids... gonna try somethin else out other than the id's

o yea: fred i still have your cd, and go team socal ;)

[James Bang]

I will most likely be there, as usual. It'll be cool to hang out with the Socal team again with all the monsters.

[michaelsil1]

Hmm.... So all that fluffy talk about matching sonic signatures actually panned out? I can't wait to hear it.

Fluffy talk.:o


I'll be there.:)

[Bluto Blutarsky]

Darn it, I can't make it, I'm going to some snot nosed kids birthday party instead.

[circa40]

I'm in...hurray for spring break!

[michaelsil1]

Darn it, I can't make it, I'm going to some snot nosed kids birthday party instead.

Didn't you miss the last one as well?:rolleyes:

Bring a box of Klenex.:D

[michaelsil1]

hmm.. sounds good, I think I can make it and there is a possibility that I could be active by then... I just need to get a third amp and then figure out how to reconfigure my install... I have no woodworking experience or tools right now.

So what Amps are you going to use?

[fredridge]

I will be going with another Zuki:)

[Roc_My_Tims]

I will try to make it, Hope my modest build is done by then so i can ride in style.

[michaelsil1]

I will be going with another Zuki:)

Silly me I should have known.

[Buzzman]

Sounds like this meet will be very well attended. I'm really looking forward to seeing the familiar faces and meeting some new sound addicts. By the way, the Buzzman will be unveiling a new ride:D (yes, the Mazda 6 has been replaced and is up for sale) with a few changes to the last system! ;) Twist my arm hard enough and I MIGHT give a few hints. :)

[James Bang]

How much for the 6 Mr. Buzzman?

I'd like to see the unveiling. There's something new every time with these meets.

[michaelsil1]

Sounds like this meet will be very well attended. I'm really looking forward to seeing the familiar faces and meeting some new sound addicts. By the way, the Buzzman will be unveiling a new ride:D (yes, the Mazda 6 has been replaced and is up for sale) with a few changes to the last system! ;) Twist my arm hard enough and I MIGHT give a few hints. :)

Lexus 460?

[doitor]

Man, you guys get together really often.
Wish I wasn't 1,700 miles away.:o

[michaelsil1]

Man, you guys get together really often.
Wish I wasn't 1,700 miles away.:o

We have fun! :)

I think one of the real benefits is that we get to hear how little tweaks affect a setup. ;)

[Roc_My_Tims]

what is the address to where the meet is?

[michaelsil1]

what is the address to where the meet is?

12645 Beach Blvd
Stanton, CA 90680

[Buzzman]

How much for the 6 Mr. Buzzman?

I'd like to see the unveiling. There's something new every time with these meets.

Hey James,

I am asking $15,900, but will consider a reasonable offer. I have removed my system, but here is a summary of the car: Mazda 6S, 62,178 miles, meticulously maintained, with Racing Beat performance springs, mufflers and sway bars (front and rear), Koni FSD shocks (less than 750 miles), 18" 5Zigen alloy wheels (6 months old), Nexen N3000 ZR rated ultra high performance tires (6 months old). Cascade Audio sound dampening material throughout car, including floors and doors, so car is VERY quiet inside. Alpine CD receiver + HiVi Coaxial speakers. Maintenance records available. No Accidents. Non-smoker.

I can't wait to unveil the new ride. I am sure it will be well received. :D

[Buzzman]

Lexus 460?

Hey Michael, no not a Lexus. A Merc S500. :)

[cvjoint]

Hey Michael, no not a Lexus. A Merc S500. :)

Now that's a change in style

[hibuhibu]

I will most likely be there with my cx-7. By the way, those of you who met me last time, I switched my speakers to Premier 720prs.

[michaelsil1]

Hey Michael, no not a Lexus. A Merc S500. :)

I was close.:p

Nice!:D

[Buzzman]

I was close.:p

Nice!:D

Yeah, you have great instincts!! :) I am really enjoying the luxuriousness of the new vehicle, and it will be a great venue for listening to music.:D

[WaTTsLOk187]

I will be there in the girls Camry again. Maybe more of you can hear it this time around. It isn't set up exactly for SQ but it might surprise you.

[BigRed]

so there is going to be a new Merc there WITH a new system in it? lol

[pballer]

I'm a noob, would it be okay if I were to appear as well???

[James Bang]

I'm a noob, would it be okay if I were to appear as well???

I see no problem in it. It is a great way to learn. The biggest plus is getting to audition the variety of equipment and asking the owner of them whatever questions you may have.

[Buzzman]

I see no problem in it. It is a great way to learn. The biggest plus is getting to audition the variety of equipment and asking the owner of them whatever questions you may have.

X2 on that.

[Buzzman]

so there is going to be a new Merc there WITH a new system in it? lol

Actually, the Merc is a little old, but looks new, and the system consists of a little bit of the old and some new things. ;)

[fredridge]

I believe Noob brings the pizza;) :p

I'm a noob, would it be okay if I were to appear as well???

[Bluto Blutarsky]

Hey good news, I have been given a reprieve from the snot nosed kids birthday party, so it looks like I will be making it after all.:cool: See Michael, guilt trips do work.:rolleyes: getting called out on missing 2 meets in a row was too much for me.:D

[silverdiesel2574]

I'm in.

[fit_tuner]

so what's the plan for lunch this time? pizza?

[circa40]

red robin's?

[michaelsil1]

so what's the plan for lunch this time? pizza?

I thought Red Robin worked out real well last time.

[BigRed]

i think all people that arent auditioning their system buy lunch :)

[monkeyboy]

I see no problem in it. It is a great way to learn. The biggest plus is getting to audition the variety of equipment and asking the owner of them whatever questions you may have.

That's exactly how I started.

No worries, everyone is really cool.

[donpisto]

Oh man, I hope I can make it. Not sure since my birthday is on the 9th and might be having a family gathering. If I come, I won't be able to stay for long, but we'll see. I definitely won't have everything in unfortunately, the enclosure probably will not be built till the 29th if I'm lucky. Come to think of it, setup MIGHT be done by the 5th if I can get the enclosure completed on the 29th. Seems like we'll have several new people attending, always great to see new faces.

[michaelsil1]

Oh man, I hope I can make it. Not sure since my birthday is on the 9th and might be having a family gathering. If I come, I won't be able to stay for long, but we'll see. I definitely won't have everything in unfortunately, the enclosure probably will not be built till the 29th if I'm lucky. Come to think of it, setup MIGHT be done by the 5th if I can get the enclosure completed on the 29th. Seems like we'll have several new people attending, always great to see new faces.

My Birthday is on the 7th.:D

[cvjoint]

Let's see:

I am down for RR again
Ready to pry some panels off the S500
Polishing my ear for Michael's new upgrades

I also have a few announcements:

I should have my kicks IB this time
This may be the last time I run the IDMax subwoofers. Anybody down for some bass sessions? I know Jim promised to test the SPL on my subs. Will he deliver?:D :D :D

[BigRed]

ill bring the meter. no problem :)

[donpisto]

My Birthday is on the 7th.:D

Woot for being an Aries. I'm on the 9th.

[Buzzman]

Let's see:

Ready to pry some panels off the S500


Hey!! :o Not at it's first meet George. :)

[WaTTsLOk187]

A Red Robin burger sounds really good right about now. :o

[fit_tuner]

ahaha, i guess red robin it is... but the pizza was pretty tasty from what i remember... haha :P if all goes well over my spring break, i should have a different set of mids installed instead of the id cx62

forgot to add: i'll have a pair of phaze audio mw64 installed, or should have installed...

[donpisto]

A Red Robin burger sounds really good right about now. :o

Anything sounds good to me right now. I haven't had anything to eat for the past 11 hours....I won't have anything to eat for another 8 hours either.....boy, thinking of those Red Robin fries is making me hungry.

[WaTTsLOk187]

Anything sounds good to me right now. I haven't had anything to eat for the past 11 hours....I won't have anything to eat for another 8 hours either.....boy, thinking of those Red Robin fries is making me hungry.

Are you on crack?

[fredridge]

surgery? fasting? too broke from car audio to eat?:)

Anything sounds good to me right now. I haven't had anything to eat for the past 11 hours....I won't have anything to eat for another 8 hours either.....boy, thinking of those Red Robin fries is making me hungry.

[veloze]

COUNT ME IN! ;) I'll bring my truck this time, so you guys can audition my Hertz HSK 165 that I won @ Marv's BBQ last year.

We should organize our own SoCal BBQ around Aug. at a local park. One of the parks I like is "El Dorado" park in Long Beach. What do you guys think?

Here is the link for the park.
http://www.longbeach.gov/park/facilities/parks/el_dorado_regional_park.asp

[donpisto]

LOL, no crack for me. More like I got home after lunch and started working on the car, finished around 7 and wasn't too hungry, but towards going to sleep I started getting hungry, but didn't want to make anything. I did eat like a caveman this morning though :D

[sr20det510]

LOL, no crack for me. More like I got home after lunch and started working on the car, finished around 7 and wasn't too hungry, but towards going to sleep I started getting hungry, but didn't want to make anything. I did eat like a caveman this morning though :D

How's it going?

Speakers come in? I just got back from mini vacation in San Diego, and was told on Friday that they had not come in.

They are closed today, so i will pick up my stuff on tomorrow : )

BTW,
Inifiniti will be replacing my engine (I was burining 1qt every 1000 miles, they have a TSB for the 6sp. 06 and 07 g35 coupes and 350z))!

I think I am going to do a simple system 2way passive but run all the wires and once I get my car back I will do the full install.
I was told my new engine would arrive this week so hopefully I can have something installed by the fifth. Anyone know how long it takes to have an engine installed?

[monkeyboy]

Depends on what they ordered. Full crate motor is an easy swap. 1 day usually. If they ordered a long block, which is likely, then the mechanic has to swap over a bunch of parts. Could be a couple of days.

If there is a TSB out requiring a motor swap, he's probably done it before though. Speeds things up.

[donpisto]

New engine? Nice, almost like getting a new car, lol. I never got a call yesterday, I was actually going to call today but you reminded me that he is closed today. So I'll be picking mine up tomorrow as well, hopefully they came in though :)

[cvjoint]

BTW,
Inifiniti will be replacing my engine (I was burining 1qt every 1000 miles, they have a TSB for the 6sp. 06 and 07 g35 coupes and 350z))!



That's not too bad. I've heard the high revving Honda engines eat about as much if you constantly keep them in Vtec range.

[fit_tuner]

lets keep this at the top! i'll see if keith will be able to make it to the meet as well, the more the merrier!

[michaelsil1]

Bump to top.:p

[James Bang]

I'll be there!.. with my downsized subs. :(

[michaelsil1]

I'll be there!.. with my downsized subs. :(

Why did you downsize?

[James Bang]

Because my wallet has downsized considerably.

It'll still be two 12"s IB'd and have Image dynamics logo on them ;)

[michaelsil1]

Because my wallet has downsized considerably.



So has mine!:(

[fredridge]

<--- x3 - no job, first time in 14 years.

Because my wallet has downsized considerably.



So has mine!:(

[michaelsil1]

<--- x3 - no job, first time in 14 years.

I hope this hasn't changed your active plans; I'm looking forward to hearing your system active.

[fredridge]

at this point it shouldn't... just need to get the amp in time to rework trunk

I hope this hasn't changed your active plans; I'm looking forward to hearing your system active.

[Rochambeau]

ill bring the meter. no problem :)

Nooooo! I'll be missing a chance to finally meter my Mustang? Those at last fall's meet will remember my Mustang 'vert. It so happens I will be in OC that very weekend but we'll be in the wifey's car. We're going to see the Angels on Friday, Diddlyland on Sat then back to the Angels on Sunday.

I guess when we take our 2 year old back to the hotel for nap between Disney sessions, maybe I can sneak over in her car. It's not quite up to par with my Mustang but it ain't bad. Give peeps a chance to hear an Alpine R in a free-air install (actually sounds good for classic rock, too outta control for her bumpity bump music though, IMO).

[donpisto]

<--- x3 - no job, first time in 14 years.

x4...Part time job FTL. Hopefully they increase my hours shortly. Getting tougher with gas approaching 4 bucks a gallon. I don't see why I need to spend $55 on 87 octane to fill up a 4 cylinder Accord.

[fredridge]

looks like car audio in so cal aint gonna be spending any money any time soon.

Besides just getting hit with an extra $500 on the suburban I just got back from taxes and looks like I am going to owe a couple grand.

I am trying unemployment as well as some part time and temp stuff.

good thing my wife is still working

x4...Part time job FTL. Hopefully they increase my hours shortly. Getting tougher with gas approaching 4 bucks a gallon. I don't see why I need to spend $55 on 87 octane to fill up a 4 cylinder Accord.

[sr20det510]

looks like car audio in so cal aint gonna be spending any money any time soon.

I am trying unemployment as well as some part time and temp stuff.

good thing my wife is still working

I think not too many people are spending money on car audio:mad:

I have noticed 4 shops closing in my area one in Whittier, one Pico Rivera/downey, one in Lakewood, and one in Artesia.

Many people have it bad at the moment : (
Pink slips were sent out at work a few weeks ago, luckily I did not receive one : )

Went to a meeting/conference for work today, first time in five years of working and attending meetings/conferences that we did not have any bottled water or free lunch : (

Good luck! Hope you find a job soon!

If you decide to go the unemployment route, there are classes you can take to help you find a good job (CNC, Machinist, etc.), or you can learn these skills so you can create some awesome installs : )

[michaelsil1]

I overheard a banker yesterday; things are really bad.

[cvjoint]

x4...Part time job FTL. Hopefully they increase my hours shortly. Getting tougher with gas approaching 4 bucks a gallon. I don't see why I need to spend $55 on 87 octane to fill up a 4 cylinder Accord.

That's because our tanks are over 17gallons ;)

It is tough out there. I was trying to find a job, with the college coming to an end. It is a jungle I tell you, you need to have a good resume and tick like a swiss watch. Nobody's getting a good job easily today nor do they have the security of keeping it. I got lucky and received an acceptance letter for a PH.D. from my school. Looks like a go for the Aura NS18 at the moment!

[Lumadar]

I might cruise...but it's quite a drive for me from down here in El Cajon. Bah!

Any meets closer to SD?

I really need help tuning my RSD180s and SEAS tweeters on my w200/h701 though... bah

[donpisto]

looks like car audio in so cal aint gonna be spending any money any time soon.

Besides just getting hit with an extra $500 on the suburban I just got back from taxes and looks like I am going to owe a couple grand.

I am trying unemployment as well as some part time and temp stuff.

good thing my wife is still working

Wow, that sucks that you have to owe for taxes. I highly recommend claiming unemployment, I think you're eligible after 1 week of not working. It will help until you find a job, good luck on getting one, I know how tough it can be.

I think not too many people are spending money on car audio:mad:

I have noticed 4 shops closing in my area one in Whittier, one Pico Rivera/downey, one in Lakewood, and one in Artesia.

Many people have it bad at the moment : (
Pink slips were sent out at work a few weeks ago, luckily I did not receive one : )

Went to a meeting/conference for work today, first time in five years of working and attending meetings/conferences that we did not have any bottled water or free lunch : (

Good luck! Hope you find a job soon!

If you decide to go the unemployment route, there are classes you can take to help you find a good job (CNC, Machinist, etc.), or you can learn these skills so you can create some awesome installs : )

Where is the shop that's in Pico/Downey?

That's because our tanks are over 17gallons ;)

It is tough out there. I was trying to find a job, with the college coming to an end. It is a jungle I tell you, you need to have a good resume and tick like a swiss watch. Nobody's getting a good job easily today nor do they have the security of keeping it. I got lucky and received an acceptance letter for a PH.D. from my school. Looks like a go for the Aura NS18 at the moment!

Yeah, true, I was amazed that we had that many gallons. I've heard the NS10 and boy that thing had some lowend for a 10, can't imagine what the 18 will be like. Are you going to do IB? Congrats on the acceptance letter :)

[cvjoint]

I might cruise...but it's quite a drive for me from down here in El Cajon. Bah!

Any meets closer to SD?

I really need help tuning my RSD180s and SEAS tweeters on my w200/h701 though... bah

Kevin K. usually drives to the meets from SD. To be honest the meet should go to him...his setup is orgasmic! Come on down!


Yeah, true, I was amazed that we had that many gallons. I've heard the NS10 and boy that thing had some lowend for a 10, can't imagine what the 18 will be like. Are you going to do IB? Congrats on the acceptance letter :)

Sweet, low end sensitivity is what I'm after. It will be IB so it should be even better down there...in the 20s :)
Thanks! Worked hard to do good on the GREs

[donpisto]

Kevin K. usually drives to the meets from SD. To be honest the meet should go to him...his setup is orgasmic! Come on down!



Sweet, low end sensitivity is what I'm after. It will be IB so it should be even better down there...in the 20s :)
Thanks! Worked hard to do good on the GREs

I was going to try IB with my 18, but I decided against it because I don't want to deal with sealing everything off. If you haven't sprayed your rear quarter panels with expanding foam, expect to use several cans. I recommend going with the Big Gap Filler. I got mine at Wal-Mart for about $5 a can. I still need to finish off the C pillars, but I have no idea where some of it is going to be honest, maybe on the top of the car along the side? lol. It's definitely work it though, makes everything rock solid and what was once hollow is replaced with a nice thud.

[cvjoint]

I was going to try IB with my 18, but I decided against it because I don't want to deal with sealing everything off. If you haven't sprayed your rear quarter panels with expanding foam, expect to use several cans. I recommend going with the Big Gap Filler. I got mine at Wal-Mart for about $5 a can. I still need to finish off the C pillars, but I have no idea where some of it is going to be honest, maybe on the top of the car along the side? lol. It's definitely work it though, makes everything rock solid and what was once hollow is replaced with a nice thud.

Unfortunately I already filled the rear pillars and now I want to delete the rear speakers in them meaning they have to come out. I have to treat the roof and get a more solid baffle this time, other than that I can't help the moonroof flex. Do you have any idea where I can get another trunk liner and rear pillars? Junk yard trip?

[michaelsil1]

I might cruise...but it's quite a drive for me from down here in El Cajon. Bah!

Any meets closer to SD?

I really need help tuning my RSD180s and SEAS tweeters on my w200/h701 though... bah

There are a couple of guys that drive up from San Diego.:)

[donpisto]

Unfortunately I already filled the rear pillars and now I want to delete the rear speakers in them meaning they have to come out. I have to treat the roof and get a more solid baffle this time, other than that I can't help the moonroof flex. Do you have any idea where I can get another trunk liner and rear pillars? Junk yard trip?

Ouch...Junkyard is what I would assume. Might want to see how much it will cost at www.hondaautomotiveparts.com. Also, IIRC lashlee on this forum has some spare parts. Might wanna contact him to see if he's got anything you need.

[tnynyn]

Is this located on Beach BLVD and Chapman? I'd like to drop by and check out some sound system..mines sucks right now because I don't have any amps...yet...

[circa40]

Is this located on Beach BLVD and Chapman? I'd like to drop by and check out some sound system..mines sucks right now because I don't have any amps...yet...

Its located on Beach, but its closer to Lampson then it is Chapman. Feel free to drop by:)

[sr20det510]

Where is the shop that's in Pico/Downey?

Yeah, true, I was amazed that we had that many gallons. :)

Shop in Pico rivera/Downey was off of Lakewood Blvd and Telegraph Blvd/5 fwy. Shop was pretty decent it was connected to a custom car shop/dealer in Torrance/South Bay and did alot of systems for them. They sold memphis and JL:o (does everyone now sell JL?)

I heard the news about our order, hopefully they get here soon! I should of stopped by or have them call for an eta last week.

BTW, my car has a 17-18 gallon tank FTL! Gets about 15-18 MPG:mad:

[cvjoint]

I might help our crowd grow by bringing some of my friends over this time. I got a buddy working on some kicks that look really promising. He is going to house Peerless Exclusives in there. Nobody is running these at our meets if my memory serves me right.

[donpisto]

Shop in Pico rivera/Downey was off of Lakewood Blvd and Telegraph Blvd/5 fwy. Shop was pretty decent it was connected to a custom car shop/dealer in Torrance/South Bay and did alot of systems for them. They sold memphis and JL:o (does everyone now sell JL?)

I heard the news about our order, hopefully they get here soon! I should of stopped by or have them call for an eta last week.

BTW, my car has a 17-18 gallon tank FTL! Gets about 15-18 MPG:mad:

I'm sure I've passed by there many times. Is it near a McDonald's? I know that's on Lakewood, but not sure what the cross street is.

15 - 18 MPG = :(

I might help our crowd grow by bringing some of my friends over this time. I got a buddy working on some kicks that look really promising. He is going to house Peerless Exclusives in there. Nobody is running these at our meets if my memory serves me right.

Haven't seen anyone yet with Exclusives. I was considering them a while back before I got the Iridiums but they wouldn't fit.

[James Bang]

I might help our crowd grow by bringing some of my friends over this time. I got a buddy working on some kicks that look really promising. He is going to house Peerless Exclusives in there. Nobody is running these at our meets if my memory serves me right.

Id love to hear those exclusives. Good job on recruiting for the cult... I mean Team Socal.

[michaelsil1]

My system is finally tuned; it took a lot longer than I thought it would.

It was a big challenge and I learned a lot. :D

[Buzzman]

My system is finally tuned; it took a lot longer than I thought it would.

It was a big challenge and I learned a lot. :D

Hey Michael, how's it sounding (compared to before, that is)? Also, is it safe to assume that if you are tuning your ear is better? Hope so.

[michaelsil1]

Hey Michael, how's it sounding (compared to before, that is)? Also, is it safe to assume that if you are tuning your ear is better? Hope so.

When I changed the Mid Bass Amplifier it changed all the dynamics of the car.:o

My ears are older, I'm not sure that's better.:p

It sounds very different.

I'll let you decide if there was an improvement over the old setup.

[Buzzman]

When I changed the Mid Bass Amplifier it changed all the dynamics of the car.:o

My ears are older, I'm not sure that's better.:p

It sounds very different.

I'll let you decide if there was an improvement over the old setup.

Well, I will definitely look forward to giving it a listen. What mid-bass amp were you using before and what did you change to?

[michaelsil1]

Well, I will definitely look forward to giving it a listen. What mid-bass amp were you using before and what did you change to?

I had a Alpine PDX 4.150 bridged to the Mid Bass I replaced it with two Audison LRx 2.4's one to each driver; I went from 300 watts rms @ 8 ohms per driver to 260 watts rms @ 8 ohms per driver.

[BigRed]

night and day difference with Michael's setup :) Trust me on that.

On another note, bigred is in the shop and they are saying it does'nt look good, possibly major engine work. I was overheating frequently, and a couple of days ago, oil started dripping.

Make a long story short, might not be at the meet with the truck :( I certainly hope whatever it is, it is covered cause what they think is wrong aint cheap!!

[michaelsil1]

On another note, bigred is in the shop and they are saying it does'nt look good, possibly major engine work. I was overheating frequently, and a couple of days ago, oil started dripping.



Bummer!! :(

[Bluto Blutarsky]

I was overheating frequently, and a couple of days ago, oil started dripping.


:o That's bad:o

[michaelsil1]

I was overheating frequently, and a couple of days ago, oil started dripping.

Jim,

Have they figured out what's wrong?

[beerdrnkr]

I'm definately showing up to the next one, hopefully my car is completely finished by then.

[beerdrnkr]

edit

[sr20det510]

Make a long story short, might not be at the meet with the truck :( I certainly hope whatever it is, it is covered cause what they think is wrong aint cheap!!

Any updates? Hopefully it is covered by warranty and you dont have to spend any money out of pocket!

Is working on a diesel engine more expensive then a gasoline engine?

Good Luck!

[BigRed]

they said head gasket possibly and the ford diesels have been notorious with this issue. If not covered it could be several thousand dollars :(

When I asked, the service guy said "yeah, I think its covered" We will see.

I find out tomorrow.

[fredridge]

hopefully they will...we hope to see the truck.


they said head gasket possibly and the ford diesels have been notorious with this issue. If not covered it could be several thousand dollars :(

When I asked, the service guy said "yeah, I think its covered" We will see.

I find out tomorrow.

[BigRed]

I think you will be surprised Fredridge, the 8's in the firewall really changed it for the better :)

I hope to be there too :)

[cvjoint]

On another note, bigred is in the shop and they are saying it does'nt look good, possibly major engine work. I was overheating frequently, and a couple of days ago, oil started dripping.

That blows. Overheating and oil leaks feel like a kick in the nuts to any car/truck enthusiast.

Talking about a kick in the nuts I think I just took the most expensive drive. I managed to kill one of my 10s in the door and crack my windshield. To make it all worse I wasn't even abusing my midbass drivers and I didn't even see the dinky rock that chipped my glass. I was simply cruising listening at a good volume and going 50mph in hollyday traffic and in a matter of minutes I probably lost over $1k in repairs.

[BigRed]

that sucks !! :(

[fredridge]

man that sucks.... team So.Cal. seems to be having a rough time lately.... out of jobs, car problems etc:(

Well, in the big scheme of things these are small setbacks... but they can stink at the time

[michaelsil1]

Times are hard, work sucks and money is short. :(


On a happier note 4703 :D

[donpisto]

That blows. Overheating and oil leaks feel like a kick in the nuts to any car/truck enthusiast.

Talking about a kick in the nuts I think I just took the most expensive drive. I managed to kill one of my 10s in the door and crack my windshield. To make it all worse I wasn't even abusing my midbass drivers and I didn't even see the dinky rock that chipped my glass. I was simply cruising listening at a good volume and going 50mph in hollyday traffic and in a matter of minutes I probably lost over $1k in repairs.

If you need windshield repair or replacement, it shouldn't cost more than 150 to get it replaced. I jumped on my windshield like an idiot when metering instead of sitting on it from to keep the pressure in. Moral of story: don't do what you see on videos :(

I do know of someone who's dad owns a glass shop, probably can get you a good deal. But there is also a place by my house that replaced my windshield for 150 or 160, don't quite remember. It took under 15 mins as well.

[Rochambeau]

A lot of it depends on the windshield and any features that it has in it. I have seen windshields cost $150 and I have seen them cost over $500.

If it is just a small chip and not directly in front of the driver, repairs usually cost like $35. You will still see the chip in many cases (sometimes not, sometimes greatly reduced) but it will keep it from becoming a crack and it costs hella less. Then again, if you have a tiny Comp deductible, just replace it.

One last thing, many insurance companies will waive your Comp deductible if you choose to have it repaired, meaning the repair wouldn't cost you anything.

Can you tell I work in insurance. ;-)

[donpisto]

A lot of it depends on the windshield and any features that it has in it. I have seen windshields cost $150 and I have seen them cost over $500.

If it is just a small chip and not directly in front of the driver, repairs usually cost like $35. You will still see the chip in many cases (sometimes not, sometimes greatly reduced) but it will keep it from becoming a crack and it costs hella less. Then again, if you have a tiny Comp deductible, just replace it.

One last thing, many insurance companies will waive your Comp deductible if you choose to have it repaired, meaning the repair wouldn't cost you anything.

Can you tell I work in insurance. ;-)

That's one thing I forgot to mention...insurance :). Though in my case I don't know how I would explain a crack with a 6" diameter.

[cvjoint]

The chip is about 1/4inch all around but there is a crack that extended out about 1/2 inch. I was thinking of waiting to see if the crack extends. I was not aware you could actually fix a windshield. I have liability so my strategy is to wait and make the most out of this glass.

150 does sound a bit low. I know people got worst quality glass than stock before. I wouldn't want to downgrade on the most important element of the glass house. Oh wait, my doors are the most important pieces of the glass house :D

So what do you guys think? Scan Speak Revelator 10s? I'm waiting to see if my Seas Excel is covered.

I will try to IB my kicks in the next few days. My 8s should have no problem diggin down to 63hz while waiting on a replacement driver. Perks of running a 5 way, an amp dies, a speaker, the system continues to play 20-20khz from a few pushes of a button.

[donpisto]

Revs = Yum.

As for my glass, it seems to be good quality. I am no expert but I've had it for several months and it has seen quite a bit of flexing. Plus it comes with a 1 yr warranty IIRC.

[James Bang]

they said head gasket possibly and the ford diesels have been notorious with this issue. If not covered it could be several thousand dollars :(

When I asked, the service guy said "yeah, I think its covered" We will see.

I find out tomorrow.
I wish you luck on that.
man that sucks.... team So.Cal. seems to be having a rough time lately.... out of jobs, car problems etc:(

Well, in the big scheme of things these are small setbacks... but they can stink at the time

it's a curse. I just got affected by it today. One of my pair of idq12s came DOA due to UPS being very gentle with it. :(

[cvjoint]

I wish you luck on that.


it's a curse. I just got affected by it today. One of my pair of idq12s came DOA due to UPS being very gentle with it. :(

Ahh it's not that bad guys. For one the weather is nicer, hot temperatures = fewer rattles and better battery performance ;)

UPS warranties everything up to one bill. Look into that to get some money back if you need to.

[cvjoint]

If you need windshield repair or replacement, it shouldn't cost more than 150 to get it replaced. I jumped on my windshield like an idiot when metering instead of sitting on it from to keep the pressure in. Moral of story: don't do what you see on videos :(

Come to think about it, I want to see YOUR video. It has potential to be very very funny :D

[donpisto]

Come to think about it, I want to see YOUR video. It has potential to be very very funny :D

Thankfully I didn't make one, lol. But pretty much I was metering and seeing what numbers I hit. I didn't have a remote so I would jump into the car and hop out and I had a 3 second gap of silence so I ran over and jumped on the windshield instead of slowly sitting on it to apply pressure. Got away with hiding this one from the parents :cool:

[James Bang]

Thankfully I didn't make one, lol. But pretty much I was metering and seeing what numbers I hit. I didn't have a remote so I would jump into the car and hop out and I had a 3 second gap of silence so I ran over and jumped on the windshield instead of slowly sitting on it to apply pressure. Got away with hiding this one from the parents :cool:

HAHA. good one Levon.

speaking of remotes, has anyone else have problems with the w200 remote running out of battery?

[fit_tuner]

sucks to hear all the bad news... but on a brighter note... the weather's nice! and we will see each other again in about 2 weeks :p

[cvjoint]

That is ridiculously funny! Jumping on the windshield...car audio is an extreme sport


My w200 remote worked like a week, I clicked maybe twice. I never revived it. It is an issue :mad:

[James Bang]

That is ridiculously funny! Jumping on the windshield...car audio is an extreme sport


My w200 remote worked like a week, I clicked maybe twice. I never revived it. It is an issue :mad:

I find it odd that my remote runs out of battery when I barely put it to use. :confused:

[michaelsil1]

That is ridiculously funny! Jumping on the windshield...car audio is an extreme sport




We sure do take sports to an extreme! :p

[circa40]

Dono if it was already stated, but what time are u guys arriving?

[James Bang]

the usual starting time is 10:30am. Around 11-11:30 is usual when everyone's present. Then BigRed come a little late and has a line that starts from his driver-side door and ends at Red Robin..

[BigRed]

(blushing) cv, reset your deck and your remote should work again. had the same thing happen to me. Don't forget to write down your settings of course :)

[WaTTsLOk187]

night and day difference with Michael's setup :) Trust me on that.

On another note, bigred is in the shop and they are saying it does'nt look good, possibly major engine work. I was overheating frequently, and a couple of days ago, oil started dripping.

Make a long story short, might not be at the meet with the truck :( I certainly hope whatever it is, it is covered cause what they think is wrong aint cheap!!

Jim I'm in the sme boat except i don't have warranty. I was taking my girl home in the Impala last night. Around the corner it started to knock bad and shutdown. I havn't taken the valve covers off yet to see if it's anything in the valvetrain. It sounds bad so it might be a broken piston rod or the crank. If it is bad I'll just bore it over .030 and put in some Lloyd Elliot heads and cam. Everyone needs 400 HP right :D

[cvjoint]

(blushing) cv, reset your deck and your remote should work again. had the same thing happen to me. Don't forget to write down your settings of course :)

What? No... How can that be? Well...I'm not doing it, it took me months to perfect that tune. I name James as the test mule :D

[James Bang]

What? No... How can that be? Well...I'm not doing it, it took me months to perfect that tune. I name James as the test mule :D

I think i'm more comfortable without the remote. :p I'll try to change the battery first.

[donpisto]

HAHA. good one Levon.

speaking of remotes, has anyone else have problems with the w200 remote running out of battery?

Yeah I've had that issue. I bought a new battery since the one I had died. I figured it was old. I used it a few times then couldn't find the remote (ended up being under the seat with a bunch of coins :D). When I found it I tried using it and it didn't work...this was after maybe 3 weeks I'd say. I bought another battery, we'll see how long this one lasts...I'm not using it though :(

I really would not want to reset the unit...that's a PITA. I think another alternative might be to take the battery out when not in use, but that will be a hassle.

Jim, any updates on Big Red? Jimmy, sorry to hear about your ride...did you still need an optical cable?

[Mr Marv]

I just wanted to mention I made the official announcement for this years BBQ. :)
2008 BBQ THREAD (http://www.diymobileaudio.com/forum/showthread.php?t=34245)

[James Bang]

I just wanted to mention I made the official announcement for this years BBQ. :)
2008 BBQ THREAD (http://www.diymobileaudio.com/forum/showthread.php?t=34245)

is that a personal invitation to us Socal folks? :p

[monkeyboy]

they said head gasket possibly and the ford diesels have been notorious with this issue. If not covered it could be several thousand dollars :(

When I asked, the service guy said "yeah, I think its covered" We will see.

I find out tomorrow.

Do you have a tuner of any kind on the truck? Intake? I know you have an exhaust.

If it's tuned, don't expect any help. Ford is getting extremely good at catching them, and denying warranty claims. I hate to be the bearer of bad news, but that's been their track record recently.

[Mr Marv]

is that a personal invitation to us Socal folks? :p

If I didn't you guys would just show up and crash the party anyway! :p :p

[James Bang]

If I didn't you guys would just show up and crash the party anyway! :p :p

i'll be sending you an email to be on "the list" once I'm sure I can make it. It's surely something I dont' want to miss, just like this socal meet :)

[BigRed]

um...well I just got back from ford and they can't figure it out. they do know the oil cooler needs to be replaced.....I hate waiting for the answers like this :(

Mr. Marv, I plan on being there :)

[monkeyboy]

um...well I just got back from ford and they can't figure it out. they do know the oil cooler needs to be replaced.....I hate waiting for the answers like this :(

Mr. Marv, I plan on being there :)

Oil cooler runs through the radiator amoung other things. If it leaks, it can pressurize your radiator and cause coolant puking. You dealer should know that though

[BigRed]

Good news: The head gasket needs replacing and the oil cooler AND FORD IS COVERING IT UNDER WARRANTY :)

Bad news: Its gonna take 3 weeks :(

Monkey boy, you go to the wrong dealership :)

[James Bang]

Good news: The head gasket needs replacing and the oil cooler AND FORD IS COVERING IT UNDER WARRANTY :)

Bad news: Its gonna take 3 weeks :(

Monkey boy, you go to the wrong dealership :)

great news, but damn that's a long time. That means we're not going to see BigRed at the meet?

[fit_tuner]

so what's the news with us goin to the bbq? my car cant make it hahaha, so i would need a ride. also, if anyone's interested, i'l have parts for sale at the meet haha

[fit_tuner]

if anyone's interested
focal polyglass 165v2 - 6.5" components
infinty kappa 639.5i - 6x9 3-way triaxials
possible: image dynamics cx62

[donpisto]

Ouch, sucks that you will not have the monster for 3 weeks :( but hey, at least it's covert. Time is better than spending money

[Mr Marv]

Sorry to hijack the thread again but I know there are a bunch of guys here that are coming to the BBQ this year so I thought I'd post the following from my official thread here as well. :)

OK guys I need EVERYBODY interested in coming to email me EVEN if you already did before I started this thread, EVEN if you mentioned it in a thread, EVEN if somebody else told me you were interested, EVEN if we already talked on the phone, EVEN if you think you are already on the list etc etc. Was I clear that I need EVERYBODY interested to email me? :D It's already getting hard to keep track of people so please include your name along with your screen name and forum EVEN if I know you since my daughter doesn't know who everyone is. Also PLEASE make sure to use "BBQ LIST" as the subject so we can easier keep track. Thanks! :)

[hibuhibu]

so What time is this going to be at???

[James Bang]

10:30am is the usual starting time.

[monkeyboy]

great news, but damn that's a long time. That means we're not going to see BigRed at the meet?

That's actually not that bad for the amount of work to be done.

Jim, you may want to take out your 8's, they need access to that pocket to remove your cab. That's how they usually get the heads off.

It doesn't matter what dealer I go to, I am stock.:D

[cvjoint]

Since my 10 died a few days ago I went ahead and rushed the IB process. The kicks are now vented in the chassis. I do have a full working system but I'm not too happy with the 8s running that low.

This might be one of those rare opportunities to hear a 3 way from me :D

Ohh and I got that voltmeter from home to take care of those quad coils

[michaelsil1]

Since my 10 died a few days ago I went ahead and rushed the IB process. The kicks are now vented in the chassis. I do have a full working system but I'm not too happy with the 8s running that low.

This might be one of those rare opportunities to hear a 3 way from me :D

Ohh and I got that voltmeter from home to take care of those quad coils

3 way........ OMG...........what's the world coming too. :o

[donpisto]

Since my 10 died a few days ago I went ahead and rushed the IB process. The kicks are now vented in the chassis. I do have a full working system but I'm not too happy with the 8s running that low.

This might be one of those rare opportunities to hear a 3 way from me :D

Ohh and I got that voltmeter from home to take care of those quad coils

:D Though unfortunately my setup will not be ready by then :( Once it is, if you wouldn't mind taking the time and helping out I would be glad to make the trip to you.

One thing I just realized we are missing at the meets are some brewski's. Would be real nice to have a few of those...too bad public drinking is a no-no. Nothing like a nice cold beer on a warm, sunny, So Cal weekend.

[cvjoint]

HA! A beer keg would be awesome. It's the puritanical background and the fact that this is diy MOBILE audio.

[fredridge]

I am really hoping to be active by then.... I should have all the equipment, will just need to install.....which could be some work, especially since I have no woodworking tools..... I need to find space for a 3rd amp and then a place for the power unit from my drz.

but then I will also need some help with tuning:)

[James Bang]

I am really hoping to be active by then.... I should have all the equipment, will just need to install.....which could be some work, especially since I have no woodworking tools..... I need to find space for a 3rd amp and then a place for the power unit from my drz.

but then I will also need some help with tuning:)

what woodworking tools do you need?

[fredridge]

not sure yet..... I think I am going to need to redo my trunk layout.

once I get my amp I am going to see.... but I am guessing saw, router etc....we shall see.... I have another idea about either hiding it or floating it... we will see when it gets here

the other problem is I am having a "procedure" next week and will probably spend most of my week in front of the couch with a frozen bag of peas;)

good news is got the suburban working well so it can go to Mexico next week with church to build houses.

what woodworking tools do you need?

[James Bang]

i have some tools you can use if you want. jigsaw, router, circular saw, corner clamps, bar clamps, countersink bit.

[fredridge]

thanks James, that would be awesome... let me take a closer look tomorrow and see what I am going to need.

i have some tools you can use if you want. jigsaw, router, circular saw, corner clamps, bar clamps, countersink bit.

[michaelsil1]

but then I will also need some help with tuning:)

Tuning :confused: :o :mad: :( :blush: :) :D

[Rochambeau]

Tuning :confused: :o :mad: :( :blush: :) :D

LOL, that's funny & oh so true.

[fredridge]

ok, got a good look today at the install.... and after looking at it I only see one option that wouldn't mean completely redoing everything.... it looks like the box the amps are in is raised to meet the level of the false floor..... looks like my only option is to rebuild the box and lower it and float the third amp above it.

[donpisto]

what woodworking tools do you need?

I need to use a Dremel for my w200 trim ring :D

[circa40]

^ I have one :)

[James Bang]

I need to use a Dremel for my w200 trim ring :D

can't help you there.

[circa40]

I can bring my dremel. We can hack away in the parking lot :)

[donpisto]

Thought you had one James. Circa, that would be great. Just need to trim the trim ring for the w200 so that it fits. It's a little big on one end.

[fredridge]

I have one too...I am probably farther than some of the other guys, but you can use mine anytime.

[michaelsil1]

I just matched all my Amps. :p

[James Bang]

I just matched all my Amps. :p

now you need a camera. :)

[michaelsil1]

now you need a camera. :)

It still looks the same.

[James Bang]

It still looks the same.

I've actually never seen your trunk. ...or speakers ;)

[michaelsil1]

I've actually never seen your trunk. ...or speakers ;)

My trunk is full of junk; very unimpressive. :blush:

[donpisto]

My trunk is full of junk; very unimpressive. :blush:

You just described my back seat :(

[circa40]

not mine, I just cleaned my car. spring break FTW:D

[michaelsil1]

Going to Monterey for a week (work) I should be back early Saturday morning. I had my time alignment set :) and then screwed it up :mad: it's too bad I don't remember what the old settings were.

[James Bang]

Hey guys, I know someone in need of some gear for a complete setup. If you guys have some extra gear laying around, PM me what you have w/ prices. Trying to get some options here.

[James Bang]

Okay. We have a week to go and I don't think i'll be having subs for this meet :(

So unlike Michaelsil, i don't have "too much sub."

[michaelsil1]

Okay. We have a week to go and I don't think i'll be having subs for this meet :(

So unlike Michaelsil, i don't have "too much sub."

When I switched to the A/B Amp on the Sub it lost its bite.:rolleyes:

[michaelsil1]

I got a big time speeding ticket driving to Monterey. :mad: :mad: :mad:

I should be back in time so you can hear the toothless one.:blush:

[OgreDave]

James, why don't you post what your friend needs? I'm sure there's gonna be plenty of ppl with stuff.

[donpisto]

Ouch, that's not good Michael. How fast they catch you for?

[fredridge]

Well, got my DRZ in today... definitely has the sparkle it has been missing..... still not active and definitely much better than that Scion (pioneer) unit. And I haven't really done anything to it..... I am totally missing midbass right now though.... I hooked it up to high and sub and the lowest it looks like I can go on high is 350hz... so I got nothing from about 80-350hz right now..... my only chance to be active by Friday is to get my other amp in and be recovered enough to try and install Thursday or Friday.

[Buzzman]

Well, got my DRZ in today... definitely has the sparkle it has been missing..... still not active and definitely much better than that Scion (pioneer) unit. And I haven't really done anything to it..... I am totally missing midbass right now though.... I hooked it up to high and sub and the lowest it looks like I can go on high is 350hz... so I got nothing from about 80-350hz right now..... my only chance to be active by Friday is to get my other amp in and be recovered enough to try and install Thursday or Friday.

Hey Fred, I am confused. Are you referring to a DRZ9255? Because if you are, you can definitely go active with that unit, as much as 4-way. Also, your low pass/high pass options are not limited to 350 Hz. And, are you missing mid-bass because you only have a sub and tweeter operating?

[michaelsil1]

Ouch, that's not good Michael. How fast they catch you for?

A plane got me going 95.:(

[fredridge]

Buzz.... I just installed the unit to my current setup which is passive.... I ran the extra RCA's, but right now they don't actually go to anything.... the RCA's that are going into my amps are currently hooked to High and subwoofer...... sub is no problem...... but the adjustment for the "high" output I could only get down to 350hz.... maybe I was doing something wrong, but lowest it would go. I think to get a pass through I needed to hook it up to front low

once I get my other amp I will be going 4 way active with it...but at this point I only spent about 10 minutes trying to figure out how to adjust..... I will have several days to read the manual to get better acquainted with it

[veloze]

A plane got me going 95.:(

Let me guess...you got caught on HWY 46. Those CHP punks with white cruisers are hard to spot, not to mention the plane. :mad:

[dbiegel]

I got a big time speeding ticket driving to Monterey. :mad: :mad: :mad:

I should be back in time so you can hear the toothless one.:blush:

Are you sure the police radar wasn't affected by all the perfectly tuned sound waves coming out of your vehicle?

Seriously though, that sucks man. I wish I could help you fight it but I haven't taken criminal procedure yet. :(

[michaelsil1]

Let me guess...you got caught on HWY 46. Those CHP punks with white cruisers are hard to spot, not to mention the plane. :mad:

The 101 North of Butler. They were waiting for me (red lights on) at the bottum of the hill around the bend; he just made a simple finger movement for me to pull over. Then he got three more of my fellow drivers in one swoop they were doing 110 and only got written up for 75 and 80.:o

I need a Lawyer.

[michaelsil1]

Are you sure the police radar wasn't affected by all the perfectly tuned sound waves coming out of your vehicle?

Seriously though, that sucks man. I wish I could help you fight it but I haven't taken criminal procedure yet. :(

I'm a chauffeur and it was a 2008 Cadillac DTS; it's so smooth.

[Buzzman]

Buzz.... I just installed the unit to my current setup which is passive.... I ran the extra RCA's, but right now they don't actually go to anything.... the RCA's that are going into my amps are currently hooked to High and subwoofer...... sub is no problem...... but the adjustment for the "high" output I could only get down to 350hz.... maybe I was doing something wrong, but lowest it would go. I think to get a pass through I needed to hook it up to front low

once I get my other amp I will be going 4 way active with it...but at this point I only spent about 10 minutes trying to figure out how to adjust..... I will have several days to read the manual to get better acquainted with it

Fred, you need to move the rca's from the "High" output to the "Low" output jacks. Then, set the DRZ to operate in "Multi-Mode." Next, using the Xover settings for the "Low" setting, set the Low Pass to "Through" and the High Pass to 63 or 80 Hz. This will send a signal from 63 Hz or 80 Hz, without limitation on the top end, to the amp driving your comps, and the passive xover will then handle everything from there. Only the Low and Sub outputs allow you to set High Pass that low. You will, of course want to play with xover slopes, but your passive most likely is a 12db slope, so I would use a similar 12 db slope for the "Low" setting, and then probably a 18db slope for the Subwoofer output. That should cure your ills. :D

[Buzzman]

I need a Lawyer.

Michael, unfortunately, you will need to fight it out in court up there, and you will want a "local" lawyer. By the time you factor in the cost of hiring a lawyer, traveling there on the day of the hearing, and the risk of losing, you might be better off paying the fine and taking traffic school. Speeding tickets are beatable, but . . . . You get my drift. Good luck, man.

[michaelsil1]

Michael, unfortunately, you will need to fight it out in court up there, and you will want a "local" lawyer. By the time you factor in the cost of hiring a lawyer, traveling there on the day of the hearing, and the risk of losing, you might be better off paying the fine and taking traffic school. Speeding tickets are beatable, but . . . . You get my drift. Good luck, man.

You can't go to traffic school over 80 mph; it's going to cost me no matter what. I have to see if I can work out some kind of deal.

[donpisto]

I'm a chauffeur and it was a 2008 Cadillac DTS; it's so smooth.

If the judge owns a Cadillac, maybe you have a chance. On a more serious note, I know of people who got their fine reduced, some even completely removed by doing community services. I'm not sure how that would work in your case or even if you would have the time to do it. Hopefully when you get the cost of the ticket it's not outrageous. You can always try asking for doing traffic school, doesn't hurt and it would be better on you and your insurance. I think I need to slow down driving myself. I catch myself doing 90 - 100, but thats not because I don't notice it :(

[cvjoint]

I did 85 in a 50 zone before and I was able to do traffic school.

I love how the car feels over 80 mph. That's where the fun starts. Honestly we shouldn't have speed limits. There is so much freedom to be lost. I would cruise at 120mph every drive from Palm Springs.

Well guys I might change my midbass drivers out after the loss. I might just try something with a bit of pro-audio flavor but it won't be ready by this sat.

[circa40]

Hey guys im planning on going IB for the meet.

I hope I can actually get up from all the freaking studying this week to do it. Yay for spring break :( Damn test and group project

[michaelsil1]

If the judge owns a Cadillac, maybe you have a chance. On a more serious note, I know of people who got their fine reduced, some even completely removed by doing community services. I'm not sure how that would work in your case or even if you would have the time to do it. Hopefully when you get the cost of the ticket it's not outrageous. You can always try asking for doing traffic school, doesn't hurt and it would be better on you and your insurance. I think I need to slow down driving myself. I catch myself doing 90 - 100, but thats not because I don't notice it :(

I make my living by driving; I need to find a way to pay and get it dismissed. I know I'm dreaming.

BTW
Monterey is so beautiful this time of year it's a pleasure to get paid for staying here a week.

[dbiegel]

I did 85 in a 50 zone before and I was able to do traffic school.

I love how the car feels over 80 mph. That's where the fun starts. Honestly we shouldn't have speed limits. There is so much freedom to be lost. I would cruise at 120mph every drive from Palm Springs.

Definitely... Last year I got a ticket for "90+" out in the deserts coming back from Palm Springs. I was able to do traffic school no problem. The cop was nice, I was going significantly faster than that. (top down in a mr2 spyder in the middle of the desert at 110 mph and still being able to hear your music -- priceless) At the time he said if he wrote 95 or higher then I couldn't do traffic school because it would be 30 over the speed limit. I guess the rule varies from county to county.

When there's other cars around or potential visibility issues I don't drive that fast... But really, what's the point of giving a speeding ticket in the middle of the desert on a sunny day with no other cars around?

[donpisto]

I don't think I'll be able to make it to the meet. My family might have something planned for me so it's really iffy. I really won't know till the end of the week, but I have a feeling I'll be missing out :(

[dual700]

What time is it?
11 like usual?

[cvjoint]

10:30 am Michael and me warm up with a little conversation.
11:00 am first people start showing up.
11:30 am 90% participation

:D

[James Bang]

What time is it?
11 like usual?

According to my clock, it is 9:02 AM.

Beware of this meet. There is a curse that is spreading like wildfire through socal. :(

[dual700]

Is Bluto going to be so kind and gives out name tags again? :D

[OgreDave]

I'm confirmed .. will be there. Was gonna try n change my setup again but that isn't happening anytime soon.

[slamtry]

Newb here. Where is this meet?

Dan

[OgreDave]

Autobacs in Garden Grove. Basically Beach Blvd / Garden Grove Blvd, right off the 22 @ Beach, heading north, on the right side.

[slamtry]

and what time is it?

Autobacs in Garden Grove. Basically Beach Blvd / Garden Grove Blvd, right off the 22 @ Beach, heading north, on the right side.

[cvjoint]

We might have a monstrous turnout this time!

I really want to meter my IDMaxes guys...so no talk of curses and crap anymore
;)

[sticky667]

i'll try to make it out.. should be fun.

[OgreDave]

and what time is it?

You couldn't ask where and when in the same post? :) j/k

10:30A-11A or so

[BigRed]

cv, you want me to bring my meter right?

[cvjoint]

cv, you want me to bring my meter right?

Yes sir! Odds are I'll never bring the IDs again at the meet ;)

[BigRed]

and I guess I can bring your dvd's too ;)

[PureDynamics]

Yes sir! Odds are I'll never bring the IDs again at the meet ;)

Changing? To what?

[cvjoint]

Changing? To what?

Well the AEspeakers 15IB is my first pick right now before the Tempest-X. I want to try first hand some oversized subs like 15s or 18s to dispel some myths and gain some experience. I'm counting on low end sensitivity to make up for the lost power from downsizing amps to save weight. I am modifying my Accord into an entry level sports car :D

I won't sell the IdMax until I get at least equal worth out of the new setup (SPL and quality). Same goes for the 10 I blew the other week.

[donpisto]

Thought you were going to get the Aura NS18...changed your mind?

[cvjoint]

Thought you were going to get the Aura NS18...changed your mind?

Timbre-audio.com is not online anymore. Dylan gave me a good price when he was still in business. I can't buy one off Madi. $900 is unacceptable. I believe I can make a better install with 2 15s now, more output too and only $200 bucks. It will be 40lbs heavier though but less intrusive.

[donpisto]

$900 is quite pricey, how much was it on timbre-audio.com? I was thinking of doing 2 15" Brahmas at one point. The problem was getting the second Brahma. I had an MKII and a brand new MKI that was with a friend, but unfortunately I never had the chance to get the sub from him :(

2 15's IB will be quite nice...and for $200, you can't go wrong with that at all.

[cvjoint]

$900 is quite pricey, how much was it on timbre-audio.com? I was thinking of doing 2 15" Brahmas at one point. The problem was getting the second Brahma. I had an MKII and a brand new MKI that was with a friend, but unfortunately I never had the chance to get the sub from him :(

2 15's IB will be quite nice...and for $200, you can't go wrong with that at all.

Oh ...how did you like the brahma? Any buzzing, motor noise etc?

I got quoted 690 plus shipping, about 100 more than I would be willing to pay, but I was serious about going for it right before Dylan stopped pming.

[fredridge]

well looks like I am not going to make this one afterall....my wife reminded me we have to be in Ventura by 1, so doesn't look like it will work for me.... well hopefully next one

[slamtry]

You couldn't ask where and when in the same post? :) j/k

10:30A-11A or so

Yes, I take your point, but I think I might echo your response: I mean did you think I knew the time when I was asking for the site? :)

Anyway, hope to see you there. I'm a newb with many questions:

[OgreDave]

Ah, but I answered your question completely, whereas you didn't truly ask the complete question :)

[donpisto]

Oh ...how did you like the brahma? Any buzzing, motor noise etc?

I got quoted 690 plus shipping, about 100 more than I would be willing to pay, but I was serious about going for it right before Dylan stopped pming.

I had it in about 1.6 cubes sealed and at the time I think I had 500w going to it. It sounded good but it needed more power, plus I would have liked to tried ported. I heard the sub in 2.5 cubes ported and off 1,000w and it sounded much better. The tinsel leads had been resoldered and they snapped so I sold the sub. As for any motor noise I never the issue with the MKII to I was using.

[PureDynamics]

Well the AEspeakers 15IB is my first pick right now before the Tempest-X. I want to try first hand some oversized subs like 15s or 18s to dispel some myths and gain some experience. I'm counting on low end sensitivity to make up for the lost power from downsizing amps to save weight. I am modifying my Accord into an entry level sports car :D

I won't sell the IdMax until I get at least equal worth out of the new setup (SPL and quality). Same goes for the 10 I blew the other week.

Come talk to me at the show I will be there for a bit.

[monkeyboy]

Need to see when I can show up. The alternator went out in my truck this week. My new one should come in on Friday, and I will be slapping it in on Saturday.

Good thing about having a diesel that is used as an ambulance... 240 amp alternator that is making 120 at idle (700 RPM).:D

[BigRed]

it makes 0 when it goes out :)

I have the same alternator :) definately helps out.

[michaelsil1]

Come talk to me at the show I will be there for a bit.

We have Image Dynamics in the house?:p

[cvjoint]

Come talk to me at the show I will be there for a bit.

Will do. I enjoyed our talk last time.

You truck guys are a lucky bunch. The only way for us commoners to get that much idle amperage is with a dual alt setup or by increasing the idle. I put my money that mine isn't making the advertised 120a at idle.

[donpisto]

Will do. I enjoyed our talk last time.

You truck guys are a lucky bunch. The only way for us commoners to get that much idle amperage is with a dual alt setup or by increasing the idle. I put my money that mine isn't making the advertised 120a at idle.

Mine was benched at 100 or 107A @ idle, I'm close to 120, but far from 140 :(

This meet seems like its going to be a good turnout, I hope I can make it.

[cvjoint]

Mine was benched at 100 or 107A @ idle, I'm close to 120, but far from 140 :(

This meet seems like its going to be a good turnout, I hope I can make it.

What's idle?

[PureDynamics]

We have Image Dynamics in the house?:p

Yes will be around. For how long I don't know, so come say hi and introduce yourself. I'm bad with names as well.. lol.

[donpisto]

What's idle?

I believe 750 or 800. I don't quite remember. I'll see if I have the spec sheet tomorrow.

It seems I'll be able to make it to the meet but won't be able to stay long. I also won't have anything nice going on....actually a worse setup than last time since I'm running stock speakers which some are partially blown.

[dual700]

Yes will be around. For how long I don't know, so come say hi and introduce yourself. I'm bad with names as well.. lol.

What's my name, B1tch?? :mad: :D :D
RX-7 All souped up for me to take a ride ? ;)

[low]

Yes will be around. For how long I don't know, so come say hi and introduce yourself. I'm bad with names as well.. lol.
this is the sole reason why im coming to this meet. oh and to beat dual700

[drake78]

low vs. dual700

Ohhhhh yeahzz, I wanna see this go down. :D

[PureDynamics]

What's my name, B1tch?? :mad: :D :D
RX-7 All souped up for me to take a ride ? ;)

I think you will have your hands full with the kids.. Maybe next time.. Its ok.. :p

[ATF Kuk]

I bet my Creative Zen with my Creative headphones will sound better than Dual700's and low's car.

[fredridge]

dang, I am going to miss all the fun.... well hopefully next time I can make the battle royale:D

[andthelam]

What time is the meet again?

[low]

I bet my Creative Zen with my Creative headphones will sound better than Dual700's and low's car.
that may be so, but my system has the ability to morph sq. it will tune itself to match the sq of your zen player once its within vicinity.

[cvjoint]

Should I bring a deflex pad to protect myself from these guys?:D

Meet is at 10:30am.

[schuey_1]

Low Vs dual UFC asian edition bwahahahaha

Anyway just be ready i will be going to yea baby i'm back in the meet its been like 2 years now :D

[OgreDave]

Albert, you going? A lotta Team Lotus showing up ...

[dual700]

Albert, you going? A lotta Team Lotus showing up ...

One more team Lotus coming: Brad Gatusso. :p

[kevin k.]

I can't recall the last time Eng, Low, and RJ were all at the same get-together...

Apparently, The End is near. :o

[schuey_1]

One more team Lotus coming: Brad Gatusso. :p


:confused:

[dual700]

:confused:

I kicked out that N00b with crappy amps in that blue bimmer, remember? :p
Brad actually joined last year, helped him a bit with his fiberglass door panels..:D

[low]

I kicked out that N00b with crappy amps in that blue bimmer, remember? :p
Brad actually joined last year, helped him a bit with his fiberglass door panels..:D
too bad for you. i already know you are missing his fearsome amps ;)

[schuey_1]

Anybody wants a Focal disc # 6 brand new i have 2 $45 each

[PureDynamics]

I kicked out that N00b with crappy amps in that blue bimmer, remember? :p
Brad actually joined last year, helped him a bit with his fiberglass door panels..:D

Did he hit your hand for touching them? NO its not dry yet!

[James Bang]

My ears are itching. Seas lotus usually knows how to scratch them well.

[fredridge]

well, as of now I am officially completely active.... only problem is several problems.

I will not be there tomorrow
I need to learn the drz
I need help tuning
and biggest problem is I think I have a blown midrange

[WaTTsLOk187]

I'll see everyone tomorrow. I will be in the Silver Camry.