Anther Project finished (Hemi 300C) [Archive] - DIY Mobile Audio - Now with Violent Bass Air!!
PDA

View Full Version : Anther Project finished (Hemi 300C)

Here-I-Come
05-25-2006, 09:09 PM
This is a 300C Hemi. This was a one day project we finished yesterday.

The front system is the stock Boston system running on a old school Soundstream Ref604 and the JL 13W7 in the trunk is running off a Soundstream Ref1002. He car also is using the Stock Head. He will be upgrading the fronts so however. The P.C. in the middle is the owners store (Platinum Customz) a wheel and tire store here in Miami.

http://i69.photobucket.com/albums/i71/Here-i-come/MafieTheCar.jpg

http://i69.photobucket.com/albums/i71/Here-i-come/MafieTrunk3.jpg

http://i69.photobucket.com/albums/i71/Here-i-come/Mafie1.jpg

http://i69.photobucket.com/albums/i71/Here-i-come/Mafietrunk2.jpg
AzGrower
05-25-2006, 11:01 PM
wow you finished that in a day?
Weightless
05-26-2006, 06:25 AM
Maybe with a 10 man crew... :D

Nice work.
Here-I-Come
05-26-2006, 06:50 AM
Maybe with a 10 man crew... :D

Nice work.

Nope a three man crew. :p
AzGrower
05-26-2006, 08:09 AM
Well after looking at the pics more, you basically just used mdf and vinyl, could be done as long as you dont do too much fiberglass work.
Here-I-Come
05-26-2006, 09:22 AM
Well after looking at the pics more, you basically just used mdf and vinyl, could be done as long as you dont do too much fiberglass work.

And you my friend are correct. ;)
chuyler1
05-26-2006, 10:30 AM
Where did you get those metal bars? That's a cool design.
Here-I-Come
05-26-2006, 12:15 PM
Where did you get those metal bars? That's a cool design.


I bought them in 12' length, I cut them and then bent and polished them by hand.