99 Frc Sq Build 3-way`s,10w7 ....Pix

[lexizpimpin]

Hey my name is alex and i have a 99 frc corvette ive been in love with car audio for years and i was always looking on this website well now im doing a full build so i will share the progress and the pictures

At first The original plan was this setup
Pioneer avic-d3
Cdt Eurosports 3 ways -Front Stage
Elemental Designs 9.2x -Front Stage Amp
Elemental Designs 9.2x-Sub Stage Amp
Jl audio 10w7-Sub
Monster Cable Speaker wire
Monster Cable Rca- 402 XLN XTREME Audio Interconnect 2 channel
Monster Cable Rca -402 XLN XTREME Subwoofer Interconnect
Knu Konceptz 4 Gauge Power Wire-Ground Wire
Street Wires Distribution Block(Positive And Negative)

Elemental Designs v1se
Elemental Designs v4

And As i started i got Sponsored By Cdt Audio and was waiting on their newest set of 3 way component speakers and now i just recieved them but i will include all of the pictures from start to today if you guys have any questions you are more then welcome to ask thanks =]

Pictures Of The Original Cdt Eurosport 3 way components from a few years back



Pictures of the 10w7


The Elemental Designs V4 Btw best stuff to work with


Elemental Designs 9.2x


Started v1se and v4 the inner part of the door






Speaker Brackets to house the Subs and Mids


All Done wrapped in v4


Inner part of the door skin also got v1se and v4


The Outer part of the door after v1se and v4


All done

[lexizpimpin]

Applied v1se on the whole trunk only 1 layer and 1 layer of v4


Knu 4 Gauge Power Wire-Gm side post adapter-4 Gauge terminal ring


Just Recieved the Knu 4 Gauge Terminal rings


Street Wires Power Distribution Block (positive and negative) very hard to get your hands on also a very clean piece

[328iBMW]

Nice. How do I get a sponsor?

[lexizpimpin]

Lets Skip to Today i recieved the new set of Cdt-Eurosport 642i 3 Way Components

Here are some pictures and comparison pictures next to the old Eurosports

Major Differences are the old mid being a inch bigger and the new tweet being a bit bigger thats about it well an 50 more rms lol

And i also Started The first steps of the sub box the pictures are on the bottom












Sub box Begging

Front

Rear

[PUREAUDIO]

that is some nice looking comps

[lexizpimpin]

the yellow once are for sale =] for a good price

[Mless5]

nice work! Your mdf looks a little wet.

[Skierman]

Looking forward to more pictures!

Great job on deadening the doors. Where are you putting the tweeters?

[lexizpimpin]

thats the question i was just about to ask i rather have them in the a pillars but cdt strongly suggested i keep them right next to the mid-sub

thing is i dont have much room there and my foot always blocks the door panel thats why i rather go with a pillar mount

so what do you guys recommend

[Arc]

Get everything in where you want them and test with the tweeters. Get some double sided tape and test multiple areas until you are happy, then install them.

[GlasSman]

Originally Posted by lexizpimpin

thats the question i was just about to ask i rather have them in the a pillars but cdt strongly suggested i keep them right next to the mid-sub

thing is i dont have much room there and my foot always blocks the door panel thats why i rather go with a pillar mount

so what do you guys recommend

If the mid doesn't have extended frequency response and ability to play up to the 4K area you want to keep the tweeters out of the A-Pillars and next to the mids.

At least they know their product.

[lexizpimpin]

hmm im not to sure about that

[CJ8501]

Man, where did you get the streetwires distor? ive been looking one for a long time already

[lexizpimpin]

was browsing threw ebay and seen it lol i guess i got lucky

[lexizpimpin]

got a few small things in and a small update

got some heatshrink tubing because i ran out


ground wire heatshrunk

sanded the ground point and attached


Got my monster rca`s and 4-to 8 gauge reducers which are for sale btw 20$ takes 4


and got the sub box somewhat figured out

[placenta]

nice looking install so far

[Skierman]

Where is that ground? Curious

[lexizpimpin]

pass side b pillar next to the seat belt motor remove the door sill and the pillar covering the seat belt and you will see it

[dvn]

I had an almost identical setup in my 02 z06. CDT Eurosports and a w7 in the spare well. I also tried swapping the w7 out w/ a pair of idq10s and then tried 4 10" round solobarics in the trunk w/ a motorized amp rack.

I was very pleased with the SQ and midbass output from the 2-way Eurosports!

[lexizpimpin]

update small nothing serious

got some bolts.neons.paint.d3

And an update of the sub box

[lexizpimpin]

a lil update and some nsfw

painted the subwoofer box red and placed the mirrors on the inside with the epoxy

and here it is wiith the front cover

side boxes that will house my crossovers here is the back of the little box covered in suede

My gf vs the w7 lmao

and a NSFW pic

[Skierman]

Will be interesting to see how it comes together! Keep up the good work.