What drivers do you want to see Klippel tested?

[DIYMA]

We are going to start up with the Klippel testing and would like your input as to which drivers (speakers & subs) you would like to see tested.
Not all suggestions will make the cut but we will test as many as we can.
Some I will buy myself, others we will try to get donated in exchange for ad space. Some may be sent in by you guys.
Any time the drivers are donated, our bought, we will give them away to one lucky forum member after the testing is done.

But for now, we need to know what drivers, speakers, components or subs you want to see bench tested with the Klippel.
Thanks so much for your attention!
DIYMA

[Here-I-Come]

Dayton Audio RS100

Tang Band W5-1685

Vifa TC9FD18-08 (NOT THE TG9, this one is the coated paper cone model)

Peerless 830986

Tang Band W4-1337SA

[Arc]

I would like to see the Tang Band Ceramic and Berylium dome tweeters tested.

[drtool]

Every 6.5 sub on the planet. I be sending 2 different ones. TB.JL and a box I will be using for them.

["that boy asad"]

i want to see these components tested, against each other...

- Hertz MLK 165
- Hertz MLK2
- Morel Supremo 6
- Focal K2p
- Alpine SPX-Z15M
- Polk SR6500

for subs, i would like these to be tested against each other...

- Hertz ML 3000
- Alpine SWX-1243D
- Morel Ultimo 12
- Image Dynamics 12" IDMAX
- Cerwin Vega Stroker Pro 12"

[gbruenin]

Call me crazy, but I would like to see a pair of the ID OEM 6.5" midbasses that Hessdawg is selling go onto the bench.

[typericey]

my drivers, of course (refer to my sig below)

the IDMax is easily a cult status sub so mythbusting it with klippel is way overdue, haha!

some other (random) drivers i'd like to see measured:

Scan D2904/6000 - not sure if this was klippeled before
Hiquphon OWI - not sure if this was klippeled before
Seas 7" with Nextel - forgot what model number; not sure if this was klippeled before
Those Pioneer Premier component sets - DIYMA's flavor of the month
IDQ 12 v3 - another one for mythbusting
Audiopulse LMS Ultra - the sub that needs the most mythbusting; are they as linear (at unearthly Xmax) as they claim to be?
Digital Designs W6.5 - just curious
Any Digital Designs sub - let's see how my country's favorite SPL brand measures

[michaelsil1]

I would like to see the Tang Band Ceramic and Berylium dome tweeters tested.

x2 :)

[Need-sq]

Call me crazy, but I would like to see a pair of the ID OEM 6.5" midbasses that Hessdawg is selling go onto the bench.

.............Ditto on that. plus the Scan D2904/6000, again, if it hasn't already been tested
Also like to see the tweets rom the Oz ME 180CS set tested
--IDQ10 V.3
--IDMAX 10 V.3

All these 12" subs............10's are the way to go:p

[cvjoint]

All these 12" subs............10's are the way to go:p

For midbass...:D

I'm down to break some myths down, that's what it's all about:

IdMax

Digital Designs subs

JL W7, W6

Accuton ceramic mids

Skaaning flex/cquenze

Hybrid L1 - L8

ATC domes

RAAL ribbons

Raven R2, R3.2 ribbons

Focal BE

Dynaudio 7,8" woofers, 3" domes

DLS 6, 8" Iridium woofers, 3" domes

[Inferno333]

CSS drivers

SDX7
SD12
SDX15
FR/WR125
The new ribbons

[mvw2]

Haha, lots. :D


Anywho, one of my favorite little woofers, the Mach 5 MLI-65, just a nice all-around performer I'd like to see some numbers on.

The new Type-X drivers, both the REF and PRO woofers and tweeters would be nice.

npdang never got around to having a pair of Seas ER woofers and getting them tested.

I think a LOT of people want to see at least a couple ID subs tested.

ED's coming out with a lot of revamping/new stuff. Their 6800 mid looks like a rather nice performer, and they're doing a lot with their subs.


On a side note with testing. I wouldn't mind seeing one individual start to test amps and HUs, mainly just measuring output specs, distortion, etc. This is an area that's been pretty much ignored. It would be good to get some tests to measure rated vs real specs. I wouldn't mind seeing a knowledgeable individual discuss any specifics about design as well and can discuss the general layout/design of the board and what advantages/disadvantages and trade-offs exist. In terms of HUs, I wouldn't mind seeing how close or skewed the "flat" output signal is from a test source CD as well as how loud you can go on the volume knob before you introduce clipping.

[Arc]

For midbass...:D

I'm down to break some myths down, that's what it's all about:

IdMax

Digital Designs subs

JL W7, W6

Accuton ceramic mids

Skaaning flex/cquenze

Hybrid L1 - L8

ATC domes

RAAL ribbons

Raven R2, R3.2 ribbons

Focal BE

Dynaudio 7,8" woofers, 3" domes

DLS 6, 8" Iridium woofers, 3" domes

Money might be an issue with these items.

I personally think we should keep a 4:1 ratio of mids/tweeters to subs.

[Genxx]

Zapco
CM8 165
CM8 100
KT 8.28

Visaton Ti100

Peerless 4" Poly or nomex cone

SEAS X1-04 Exotic F8, 4 ohm, 8" Full Range Driver--I know this one is not possible just throwing it out there

Any of the new Sundown Subs
JL 8W7


X2 on the CSS, Focal Be and Hybrid

[npdang]

I would like to see stuff from the upscale car audio market... Focal, Brax, Rainbow, Sinfoni, etc.

Most of the raw drivers from Seas, Scan, Vifa, etc. have a good chance of being tested by Voice Coil or some other place.

[60ndown]

A speaker is only as good as.........


audiobahn 'inhuman'

mtx 'jackhammer'


:D

[typericey]

do you guys think it is interesting to see a video of drivers being tested (klippel or whatever)? how about uploading a short clip of the testing in youtube? we've been doing too much forum reading. it's about time we do some watching. haha!

[MarkZ]

I'd like to see some of the popular widebanders tested with it. The TG9, the Peerless 3" one, the Aura NS3, etc.

[bikinpunk]

Tweeters:
Hybrid L1 Tweeter

Scan d2904/6000

Those xt19 tweeters that everyone went nuts for


6.5:
Dyn drivers

Hybrid L6/L8


Most of the larger drivers I'd be interested in have already been tested afaik.

I'd be willing to send my 12w7 since I'm not using it and won't be for a year.

[iyamwutiam]

Micro-precision Z series
Brax drivers
Mirco-precision 7 seies
Focal beryllium w and w/o crossblock
Alpine SPX 18t
Genesis Absolute
Rainbow Reference
Jordan - any driver -but probably the latest one
Manger
ATC

[cvjoint]

Money might be an issue with these items.

I personally think we should keep a 4:1 ratio of mids/tweeters to subs.

Understood. I hope the doors remain open for people to send their units for testing, that way no $ are needed. I'm sure there are plenty of folks who would be interested. I could send a few oversize Excels, 12" IdMax myself.

BTW do we know where the test setup is?

[~thematt~]

For midbass...:D
Skaaning flex/cquenze

They have both been done (the 5" and the 8") by npdang, and the results are in the Klippel section.

I'd like to see the ATC dome, with Dynaudio, Morel and Rainbow being run through their paces. Not their entry level stuff either (because be honest, if you are gunning for that stuff, Klippel isnt high on your checklist) but the Supremo, Platinum/Reference and Esotar gear.....

[Hillbilly SQ]

i'd like to see the id oem mid tested as well. however, it needs several hours of solid play to be broken in and is a completely different mid after it gets limbered up...kinda like a dyn. if anyone has a used mid they could send in that would be great.

[$rEe]

Dayton Audio RS100

Tang Band W5-1685

Vifa TC9FD18-08 (NOT THE TG9, this one is the coated paper cone model)

Peerless 830986

Tang Band W4-1337SA

X2

+ Tang Band W3-871SC

[BEAVER]

ID OEM mid
Dyn MW162
IDQ10V3
CSS SDX7
Mach 5 MLI-65
Polk SR6500
Alpine SPX17-Pro

To name a few...

[cvjoint]

i'd like to see the id oem mid tested as well. however, it needs several hours of solid play to be broken in and is a completely different mid after it gets limbered up...kinda like a dyn. if anyone has a used mid they could send in that would be great.

I'd like for us to test that myth too, klippel out of the box, klippel after 1 month of break in.

I've noticed other people listed drivers that have been tested already besides the skaaning stuff. I hope the OP does a history check so we don't do repeats.

[npdang]

I'd like for us to test that myth too, klippel out of the box, klippel after 1 month of break in.

I've noticed other people listed drivers that have been tested already besides the skaaning stuff. I hope the OP does a history check so we don't do repeats.
It doesn't have much, if any effect on the shape of the curves as I've noticed. It will affect compliance, but who cares as that isn't the primary purpose of Klippel LSI.

[Neil]

I have a list of all the drivers requested so far and am compiling a list of all the Klippel tests already completed. This will help keep things organized.

[seagrasser]

I'd like to see a comparison between the Dayton RS28a and the Usher 9950

Also any of the various Usher mids in the 849* series.

I also have a ton of 12's I could lend toward testing.

[denim]

As soon as we have our new lines out, I would love to get them Kippel tested.

[DIYMA]

Wow...
Looks like I might have to take out a loan to purhase all thiese fricken drivers..

ANT

[hessdawg]

i will donate a pair of ID oems for DIYMA
just PM me with info
i will also be @mr marvs BBQ if nay admin will be there i can hand them off too

[bikinpunk]

Depending on when you do it, I could send over a couple things, such as my dyn mids, and a 12w7.

[captainobvious]

Wow...
Looks like I might have to take out a loan to purhase all thiese fricken drivers..

ANT

Ant/Npdang-

I'd be leaning much heavier toward the DUMB side of the scale if it wasnt for learning so much from this site and the members in my time here.

I have a little time yet before Im ready to do my installation with the Hybrid Audio L1pro and L4 mid.
I know there has been alot of interest in these so I can loan them out for testing if it would benefit the other guys on the site. Just give me a time frame on when you want them and when you'll be finished up and we're good to go. ;)


I'd also very much like to see tested:
Peerless Exclusive 830884 8"
Morel EM428 4" mid
Scanspeak 21W/8554 8"

[saintwrath]

I have a pair of Morel MW160 4 ohm I can donate for testing. Pls msg me.

[*B*]

Lambda TD15 variant... X or H, possibly Apollo preferred
Rainbow Reference
Brax Graphic
CSS SDX7
Exodus Maelstrom-X
PHL 1120
ATC SM75-150S
Focal Be
Mark Audio Alpair 5
B&C 15TBX100
Infinity Perfect (I always thought it was a good driver with good value)
JL Audio components
Silver Flute 6.5"
Tang Band Bamboo
Accuton driver

[rdv]

I'd like to see tests on cheaper drivers, I am always curious about the speakers i see in madisound and parts express (hi-vi, eton, full rangers, closeouts,etc).

i would also like to see comparisons between 6" and 5" inch mids/woofers, to show if there are 5's out there that can be used when there isnt enough space.

[captainobvious]

In addition to these:
Peerless Exclusive 830884 8"
Morel EM428 4" mid
Scanspeak 21W/8554 8"

Id also like to see any of these tested:
Usher 8137A 8"
Usher 8955A 8"
HiVi M8a 8"
HiVi D8.8 8"
Aurum Cantus AC-200MK2 8"
Morel H8.1
Morel MW267

[Brian Steele]

Any of the more affordable eD drivers, including the 13kv.2-D4, on sale now for $50

[Eric Stevens]

Wow...
Looks like I might have to take out a loan to purhase all thiese fricken drivers..

ANT

Contact me for a IDQ12V.3 if you would like or 10" I will send one to your for the purpose of a Klippel test. Also could send XS drivers as well.

Eric
Image Dynamics

[captainobvious]

Contact me for a IDQ12V.3 if you would like or 10" I will send one to your for the purpose of a Klippel test. Also could send XS drivers as well.

Eric
Image Dynamics

Thanks for stepping up Eric, thats awesome.

[michaelsil1]

Contact me for a IDQ12V.3 if you would like or 10" I will send one to your for the purpose of a Klippel test. Also could send XS drivers as well.

Eric
Image Dynamics
Thanks for the offer.

That’s two drivers I would like to see tested.

[Electrodynamic]

I'll send in a Mag v4 and a BM v2 when they come in. The Mag v4 would be the first to arrive. Has anyone been selected to do the testing yet?

[captainobvious]

Do we have any kind of timeline for when testing can start? There are a few of us willing to send in drivers on loan to get tested...

[GlasSman]

Contact me for a IDQ12V.3 if you would like or 10" I will send one to your for the purpose of a Klippel test. Also could send XS drivers as well.

Eric
Image Dynamics

I'd love to see some IDQ and XS drivers.

[GlasSman]

The ESB drivers Zapco uses in their C2K component set.

[Aimar]

Boston Acoustics components(pro 60)
Tang band rs180-4
Tang Band W4-1052SD 4" Driver

[bbfoto]

Most have been mentioned already, but I'd like to see testing on the following 5.25" mids:

Alpine SPX-13PRO
Pioneer Premier TS-C520PRS
Boston Acoustics SPZ-50

6.5" Component Sets:

Boston Acoustics SPZ-60

Oh...another one that I've used quite a bit in the past but have never seen any tests/reviews on:

PG Ti9m 9" (Morel-made Mid-bass) a.k.a. Phoenix Gold Titanium Elite 9m

When does this start?

If anyone is interested, I've got a bunch of stuff laying around that I could send in:

Infinity Beta 12 & 15 Subs (4-Ohm DVC)
Aura Force 12 Sub
Audiomobile MASS 2012 Sub
AE SL10 8-Ohm Slim Sub (1st Gen./circa 2005)
Koda 6 Mids
eD Eu-600 (2-Ohm DVC)
Peerless 6.5" HDS 182 with Phase Plugs (Peerless #850467).
Diamond Audio Hex 600s 5.25" & 6.5" mids (1st Generation Eaton mids)
Peerless XLS8...I think these have been tested already, right?
DLS IR3 Dome mids
Alpine SPX-177R Set
and lots more, lol...

[Electrodynamic]

If anyone is interested, I've got a bunch of stuff laying around that I could send in:

Infinity Beta 12 & 15 Subs (4-Ohm DVC)
Aura Force 12 Sub
Audiomobile MASS 2012 Sub
AE SL10 8-Ohm Slim Sub (1st Gen./circa 2005)
Koda 6 Mids
eD Eu-600 (2-Ohm DVC)
Peerless 6.5" HDS 182 with Phase Plugs (Peerless #850467).
Diamond Audio Hex 600s 5.25" & 6.5" mids (1st Generation Eaton mids)
Peerless XLS8...I think these have been tested already, right?
DLS IR3 Dome mids
Alpine SPX-177R Set
and lots more, lol...

We've got the MASS DUMAX (http://stereointegrity.com/Files/DUMAXMASS2012.gif)results on our web page. I know it's not Klippel, but it's better than std T/S's.

...and I think we've got the Koda somewhere too. I'll see if I can upload it tonight.

[VaVroom1]

i have been curious about shallow subs. would love to see some of these tested eg jl audio 13TW5, pioneer TS-SW1241D etc.

[caver50]

Any of the new Tang Band

[LauZaIM]

Might have already been mentioned but heres my wish list.

SI Mag v4
Fi Q
eD Kv series
Phoenix Gold RSD65cs component set

[sick02sentra]

elemental designs 13Av.2's

[circa40]

I would be curious to see the results of my last PG Ti Elite 12 :)

[bld 25]

mach 5 mli 6.5.
type x pro tweets

[a$$hole]

mach 5 mli 6.5.
type x pro tweets

Not sure on this, but those might have to be some big ass tweeters :D

[bld 25]

sorry, i didn't know you couldn't test tweeters

[03blueSI]

Boston Acoustics SPZ60

[Neil]

Once things are under way, we will be able to test tweeters...that's not a problem by any means. Klippel results for tweeters aren't always really valuable, but we will be testing other physical aspects that will prove useful to everyone.

Thanks for the continued suggestions. At some point, I do hope we'll be able to test everything listed so far and more. :)

[bikinpunk]

Neil, I just removed my Dyn mw162's and put them up F/S here. But, I just thought that maybe you could test them before I sold 'em. What do you think? Something that you could do if I were to send them in the next couple days?

[Neil]

It will be a bit yet before testing gets started. Waiting for things to arrive here. If it is still available when we get going, I will, however, definitely be up for that.

[Brian Steele]

I'd like to suggest the MCM SUB1250R - see http://www.mcmelectronics.com/product/55-2332. If the quoted specs are correct, this sub should be a steal at the quoted price.

[J0ne]

T18REX/XFC (H1353) 7" Coaxial

[hc_TK]

polk sr subs! :D

[low]

i vote those HAT drivers be tested. can we get some of those in?

[FoxPro5]

i vote those HAT drivers be tested. can we get some of those in?

I can send the remainder of the Legatia series, if need be: L1, L4 and L8.

Can someone please confirm that Neil is still going to do this. I'm hearing different things. Thanks.

[DIYMA]

Neil is in fact doing all of our testing.
There was a point when a conflict in schedule may have changed his availability, but he is in fact moving forward with the testing

ANT

[squeak9798]

I would like to see some of the DIYCable offerings tested; Shiva-X (one of which just arrived on my doorstep this afternoon :) ), Tempest-X or Maelstrom-X.

[86mr2]

I have a pair of 6.5" Alpine Type S component mids I would love to see tested. Troll in the shallow end of the car audio gene pool as it were. I am in Canada, so shipping for a test performed largely for grins would not be odious, but I would not want to waste Neil's time unnecessarily.

They have been removed from a car where I assume they had several years use so they will be well broken in. :rolleyes:

[tr0y_audi0]

What do i need to get some subs tested I have both NIB
Do I get them back without damage ?:p
who pays shipping to & fro
Alpine Type X :SWX-12d4
RE Audio : SE10

[XC-C30]

TB :D

W3-871 (paper)
W3-1319SA (bamboo)
W4-1320SD (bamboo)
W6-623c
W6-1139sc

Hi-vi M3N


:D

[stryke23x]

Lambda TD15 variant... X or H, possibly Apollo preferred


If Neil is interested, I can definitely provide whichever Lambda TD drivers woudl be of most interest. We've had quite a bit of interest in the TD10M's as large midbass drivers. We also have the car version of the IB15 that has been a hot topic lately as well. Our new AV12 and AV15 are also only a few weeks away now as well, so I could provide one of those as well. The AV series would be the most typical driver for a car application. There are 2 versions now, one that is more your everday type use driver and one with higher BL and mass for more force as an SPL driver. Again, whatever people want to see tested I'll provide. Neil, send me an email to john at aespeakers and Let me know which would be most of interest.

John

[Brian Steele]

Our new AV12 and AV15 are also only a few weeks away now as well, so I could provide one of those as well. The AV series would be the most typical driver for a car application. There are 2 versions now, one that is more your everday type use driver and one with higher BL and mass for more force as an SPL driver.

Hmm.. I'm definitely looking forward to seeing those! I was trying to get my hands on two of the old AV12s when my Shivas died, but alas..

[BEAVER]

I would also like to see some HAT stuff tested, specifically the L6.

[MIAaron]

Yeah! HAT stuff, and some more rainbow tweets while we're at it. :D:D:D

[Babs]

I 43rd that.. HAT.
I'd love to see some mid and higher end car-branded stuff compared to mid to higher end raw diy specs. I'm betting Scott's drivers would hold their own respectively as I've heard them and my ears say they rock. Data don't lie so.. there ya go.

Also.. how bout the new Seas L16RNX (http://www.madisound.com/catalog/product_info.php?products_id=8430) 4ohm/8ohm?? Dang sexy looking new driver. Did a search in here and found nada, zilch, nothing.

http://www.madisound.com/catalog/images/h1488.jpg

[MIAaron]

Yeah! HAT stuff, and some more rainbow tweets while we're at it. :D:D:D

Damn, nobody caught the humor in this comment???? :(

[86mr2]

Also.. how bout the new Seas L16RNX (http://www.madisound.com/catalog/product_info.php?products_id=8430) 4ohm/8ohm?? Dang sexy looking new driver. Did a search in here and found nada, zilch, nothing.


John Krutke tested a cousin of this driver:

http://www.zaphaudio.com/5.5test/

He also has tested at least one other I have seen in this wish list The W3-871.

http://www.zaphaudio.com/tidbits/TB-W3-871-FR.gif

No sense covering old ground.

I heartily recommend John's site to anyone interested in the science of loudspeaker design. He has test results for many of the drivers we have been trying in cars over the years. It helps to enter with an open mind.

http://www.zaphaudio.com/

[less]

How about the Skaaning - AudioTechnology 8" C-Quenze drivers which are reported to be made specifically for car applications. I find it unusualy that these drivers are quite high priced in relationship to the rest of their line and wonder if there is something about them that actually justifies their price - currently half off at madisound for about $250 each...

If anyone's tried these, I'd sure love a brief review!

Less

[its_bacon12]

I'd love to see those 8" OEM Madisound drivers. They could be a real gem for $35 shipped for a pair.

[Dangerranger]

I have a Digital Designs 1508 subwoofer that I could send, I'm biased but I'm interested to see how it'd perform :D, maybe others as well? It's one beast of an 8" sub, plus DD doesn't have T/S parameters on it so it's be good to see how they model up

[~thematt~]

How about the Skaaning - AudioTechnology 8" C-Quenze drivers which are reported to be made specifically for car applications. I find it unusualy that these drivers are quite high priced in relationship to the rest of their line and wonder if there is something about them that actually justifies their price - currently half off at madisound for about $250 each...

If anyone's tried these, I'd sure love a brief review!

Less
Already done. In fact, its on page one.

http://diymobileaudio.com/forum/showthread.php?t=5619

[circa40]

I have a PG Ti Elite 12 that I'll donate for testing...

[86mr2]

At this point - ANY!

[Inferno333]

I might be able to send in my Nobelium 6" mids and a Haxo Sounds LXU12.

[falkenbd]

Dynavox LW6004PMR 6-1/2" Woofer i'm intrigued by this woofer, but haven't heard much about it.

[Ricci]

I just found this site a few days ago. I really like the tests of drivers that have been done here. It's hard to find testing like this of most drivers. I'd like to see any of the Lambda drivers get tested, CSS SDX's, Exodus audio X series, anything from Mach 5 Audio. RE Audio 06 XXX.

[ASCI_Blue]

How about some entry level speakers. Maybe Rainbow SLC/SACs.

[chad]

How about some entry level speakers. Maybe Rainbow SLC/SACs.

Think Aura NS6-255-8A. Rainbow is FAR from entry level ;)
I have a pair here but I ain't shipping them to Canada for the cause :(

[a$$hole]

I really love how this new Klippel testing is working !

Oh, bye the way ... "has anyone seen where they post the results?"

[BeatsDownLow]

I want to see any speaker being tested instead of no speakers being tested

Do Neil not have the Klippel machine yet or does he not have time to test speakers? Maybe they should have sent it to someone with more time free to test, I dont know if thats the case I am just speculating

[SQCherokee]

A friend of mine bought 4 of the new Dual SD12 subwoofers. I would like to see these tested...at $30 each they aren't great but the specs could potentialy show them to be a pretty good bargain.

Besides Dual has no info on building a SQ enclosure so this would help me help him.

[Sassmastersq]

fostex ff85k would be a good driver to test, but ANY driver would be better than the current none.

what a waste of a klippel

[DIYMA]

fostex ff85k would be a good driver to test, but ANY driver would be better than the current none.

what a waste of a klippel


I hear you...

[Boostedrex]

I want to see any speaker being tested instead of no speakers being tested

Do Neil not have the Klippel machine yet or does he not have time to test speakers? Maybe they should have sent it to someone with more time free to test, I dont know if thats the case I am just speculating

+1 on that!

[BeatsDownLow]

+1 on that!

They shoulda sent it to a loser like me with nothing but free time, I coulda had 100 drivers done by now.

[kappa546]

so what's the delay? time? I doubt it's lack of drivers because i have a handful here i would sent for testing.

[bassfromspace]

I vote we get the Klippel back over to NpDang.

[captainobvious]

Do we have any kind of timeline for when testing can start? There are a few of us willing to send in drivers on loan to get tested...


Yes, I just quoted myself :p That was on 7/2

I wouldnt get your hopes up boys...
There have been countless generous offers to send in drivers to be tested that would not cost a thing, yet no tests have been done.

:confused:

[toyrunner]

I would like to see the NEW SI mag v4.

[satsloader]

Peerless 830883 ( since I just Paypal'd for a pair :D )

Edit; Well, I didn't see it in the title, but it was included in a three way ( Rainbow Platinum, Alpine F#1 ) Npdang did , my bad..

Bill in P.G.

[a$$hole]

Peerless 830883 ( since I just Paypal'd for a pair :D )

Edit; Well, I didn't see it in the title, but it was included in a three way ( Rainbow Platinum, Alpine F#1 ) Npdang did , my bad..

Bill in P.G.

When you win that raffle in 2009 you should have those dyns tested :)

[satsloader]

"When you win that raffle in 2009 you should have those dyns tested"

A most excellent idea. If I did win, and if Npdang had the klippel, I'd be happy to drive them up to him.. What a great road trip that would be.. any excuse to motor the Mini AND meet a living legend.

Bill in P.G.

[~Spyne~]

i'd love to see the Crescendo MB-6 midbass driver tested
=http://www.audioplusonline.com/home.php?link=brand&id=1&cat=33&prod_id=148]linky

just out of interest, as i purchased a set recently, and am very impressed with performance...esp considering price

[~Spyne~]

*edit: silly internetz, double posting...

[454Casull]

Exodus Audio Maelstrom-X

http://www.diycable.com/main/product_info.php?products_id=681

The EX-6.5 would be nice, too.

http://www.diycable.com/main/product_info.php?cPath=24_93_150&products_id=538

[pokz865]

Seas Lotus Extreme Performance.....Thanks!

[go_go_thrash]

Polk sr6500's
12" idq v3
AE 15" av-x and av-h

[Boostedrex]

So has anyone heard from Neil to see if he's going to start testing drivers or not?

[DIYMA]

I just sent him an email last week. Nothing yet..

[unpredictableacts]

Dynaudio Esotar 1200


That was easy.