WTB: Install pieces

**Godsmack** · 04-22-2012

Product Brand & Model:

Looking for distribution blocks. Fused and un fused. Prefer 0 awg in and 2 or 4 awg out. I would like to buy some bulk lots.

Condition of all items:

New preferred

Total Price: :

Depends

Shipping Terms: :

Included in price to 85613 please

Pictures: - Unless you are a Upgraded member, or your last 10 iTrader feedbacks are positive, you must post a picture of the exact item you are selling.

No pics from me but from you please.

Additional info:

I have a ton on installs pending so the sooner the better.

** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------

Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recomend that you:

1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.

DO NOT proceed with a deal until you are completely satisfied with the other party.

DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.

**Godsmack** · 04-26-2012

TTT

J

mcintoshi · 04-27-2012

I have a brand new Audison Connector SFD 41C. This is the 1/0 AWG to 4 fused 4AWG or 8AWG out plus 1/0 ground to 4AWG or 8AWG out. $90 shipped.

rcurley55 · 04-27-2012

I have a ton of stinger pro series stuff. I'm sure you can piece together just about any system imaginable. I have some 0/1, 4, and 8 ga power/ground wire to go with it too.

Take a look at it, let me know what you want and I'll put together a package for you. Some items like the barrier strips, fans, and some of the ring terminals may not be available.

FS: HUGE Lot of Stinger Power Accessories

**Godsmack** · 05-01-2012

I'll take you ANL fused with 1AWG in and non fused with 1 AWG in.

How many of each do you have left and what kind of deal can we work for all to 85613? Any RCA's?

J

rcurley55 · 05-01-2012

Quote:

Originally Posted by Godsmack

I'll take you ANL fused with 1AWG in and non fused with 1 AWG in.

How many of each do you have left and what kind of deal can we work for all to 85613? Any RCA's?

J

I assume you mean this:

1 x SPD8203 - Pro Series ANL Fuse Holder - 4 or 1 ga (only water proof for 1 ga) - Used - MSRP=$75 My Price=$30
1 x S206IE - Non-Fused distribution Block - (2) 1/0ga Input, (3) 4ga Outputs (no plastic cover included) - Used - MSRP=$55 My Price=$5

The quantities are listed as the first number in the post I linked above. I have two of the 1 ga ANL fuse holders - the only difference is the pair of o-rings that come with each. Let me know what size fuse you want as well and I'll pm you a price.

As for RCA's, just one Monster XNL301 3-foot cable.

**Godsmack** · 05-01-2012

1 x SPD5210 - Fused distribution Block - ANL* 1/0 Input (2) 4ga Outputs (plastic sheet still on) - Used - MSRP=$64 My Price=$20

That one.

I wish you had more than one of each.

As for fuse size.........surprise me. Just have to be full sized ANL not mini. Zip code is 85613

J