Preferably BNIB but anything is acceptable. Just let me know what you have. Not interested in any processors/DSPs. Just the HUs themselves.
Shoot me a PM or reply here. Thanks
** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------
Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recomend that you:
1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.
DO NOT proceed with a deal until you are completely satisfied with the other party.
DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.
Notice the harness in the 414 isn't for the 414, but for a dead head like the 415/416. And I think I have the 414 harness somewhere too. I had trim rings, but I can not find them.
There is a mint 416 faceplate.
The 510 has been modded for AES/3 balanced digital output for use with a proaudio processor like the Ranes I had or a Behringer DCX2496. But the Factory plug is still there (or I have another) and can be put back to stock by cutting this off and soldering the factory 3 wires back.
The 414 is coded. It was coded when I got it. The CD I had but can't find any more. But I do know which CD it was- the Grease CD with John Travolta and Oliva Newton John on the cover...green board with a pencil on it. No, I did not code it myself.
The 510 is wearing the proper tabs and mounting cage for any of the ECD units. I may have more of both here too.
I found a controller for the DDL system and some box that went with it...I had the whole DDL system.
I will look for more parts. I know there are some faceplates in various conditions here somewhere and the harness for the 414 is here too somewhere...wife "cleaned" my "crap up" the other day, so it's going to take me a bit to find it all again.
How about the only ECD you didn't list, a 413. Worn condition but works fine, note the somewhat frayed wireing harness.
"Some people spend an entire lifetime wondering if they made a difference in the world. But the U.S. ARMED FORCES don't have that problem.".. Ronald Reagan
I have seen this set in person. Amazingly complete and very nice condition. Even has the ultra rare optical cable.
I would love to own it! There was a complete one on eBay about a month ago with the optical cable and even the DSP expansion module but the starting bid was $999 so it never got any bids (of course) and entire system like that see a to have a value of right around $700. Which of course with equipment of that age the value is in the eye of the collector!
I would love to own it! There was a complete one on eBay about a month ago with the optical cable and even the DSP expansion module but the starting bid was $999 so it never got any bids (of course) and entire system like that see a to have a value of right around $700. Which of course with equipment of that age the value is in the eye of the collector!
I would (reluctantly!) be willing to part with the setup as it seems it would be going to a good home !
WTB: Eclipse ECD series HUs!
Re: WTB: Eclipse ECD series HUs!
.
Linear Mode
