Morel Ultimo 12 and Dynaudio Esotar2 1200 Users- Aperiodic Enclosure For Sale

[Buzzman]

Product Brand & Model:

I am selling my Aperiodic Enclosure which was used VERY successfully with my Morel Ultimo 12 and Dynaudio Esotar2 1200 subwoofers, as I have documented in my reviews on both subs. The AP mat was made by USD Audio. The enclosure as you will see from the pics is made of 3/4" MDF and is 5-sided, so only the top panel to hold the sub needs to be fabricated. There are some small holes on the underside created when the carpeting was removed, but they can be easily filled. The enclosure is ready for carpeting or whatever.

Condition of all items:

Used.

Total Price: :

$250.00

Shipping Terms: :

Included in Price

Pictures: - Unless you are a Upgraded member, or your last 10 iTrader feedbacks are positive, you must post a picture of the exact item you are selling.






Additional info:

PM me if you are interested.






** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------

Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recomend that you:

1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.

DO NOT proceed with a deal until you are completely satisfied with the other party.

DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.

[schmiddr2]

I imagine a lot of people are like me and think where does this go in the car. Maybe it's in one of your bulids,

Dynaudio Esotar2 1200 Subwoofer – An Upgrade From The Morel Ultimo 12???
Da Benz Gets A Makeover – Here's A Preview Of The Coming Attractions

[Buzzman]

Originally Posted by schmiddr2

I imagine a lot of people are like me and think where does this go in the car. Maybe it's in one of your bulids,

Dynaudio Esotar2 1200 Subwoofer – An Upgrade From The Morel Ultimo 12???
Da Benz Gets A Makeover – Here's A Preview Of The Coming Attractions

Have a ski pass-through? Mount it so the sub fires through it? Rear deck with an opening? Mount it so the sub fires through it. But, you must have the enclosure in a trunk that is completely sealed from the cabin.

Here are pics of mine mounted to my rear deck first with the Ultimo and then with the Esotar:





Here are pics of the enclosure with the Ultimo mounted in it:

[req]

can the AP mat be re-tuned?

i would assume that a driver with different T\S specs would need slightly different AP resistance for optimal performance?

i bet it sounds great tho! good luck selling

[so cal eddie]

Originally Posted by req

can the AP mat be re-tuned?

i would assume that a driver with different T\S specs would need slightly different AP resistance for optimal performance?

i bet it sounds great tho! good luck selling

I didn't build this one, but I did put together a few when I worked at Speakerworks. We would sandwich the material between two pieces of mdf that were glued together, so a retune might be difficult. This one may be screwed together which would make a retune more realistic, but I don't know for sure.

This enclosure looks very sturdy and should sound great. I'm all for the slightly larger enclosure with more area for the vent, as this tends to sound a lot better. Good luck.

[DAT]

Originally Posted by so cal eddie

I didn't build this one, but I did put together a few when I worked at Speakerworks. We would sandwich the material between two pieces of mdf that were glued together, so a retune might be difficult. This one may be screwed together which would make a retune more realistic, but I don't know for sure.

This enclosure looks very sturdy and should sound great. I'm all for the slightly larger enclosure with more area for the vent, as this tends to sound a lot better. Good luck.

all you have to do is find out the QTS of the Morel Ultimo sub and find another sub with similar or lower QTS and this will work 100% for you.

[Buzzman]

Originally Posted by req

can the AP mat be re-tuned?

i would assume that a driver with different T\S specs would need slightly different AP resistance for optimal performance?

i bet it sounds great tho! good luck selling

Well, technically the AP mat can be re-tuned, but the amount of work involved because the mat is embedded inside MDF would make that effort senseless. You would be better off purchasing a new mat designed for your particular sub. And, yes, as I noted in my reviews on the Ultimo and Esotar subs, this AP application was awesome.

[miniSQ]

Ap Mat boxes are so awesome...but when i used to build them, we made them just a bit deeper than the sub...this box seems to be 8"-10" deep instead of the 6" i would expect. Or is it just the way it appears in the pic?

[Buzzman]

Originally Posted by miniSQ

Ap Mat boxes are so awesome...but when i used to build them, we made them just a bit deeper than the sub...this box seems to be 8"-10" deep instead of the 6" i would expect. Or is it just the way it appears in the pic?

Using 3/4" MDF for the top plate, and with the Ultimo or the Esotar sub counter sunk, there is 1" between the bottom of the sub and the top surface of the mat.