Pictures: - Unless you are Chuck Norris, or your last 10 iTrader feedbacks are positive, you must post a picture of the exact item you are selling.
Additional info:
Got these from DAT to put into an install a guy backed out on. No one in my area is willing to pay this kind of cash on a pair of 12s.
More C&P from Hertz Website:
12 Inch 1200 Watts Max, 600 Watts RMS Single-Voice Coil 4-Ohm Subwoofer
Hi-Energy HX Subwoofers represent the highest technological expression in terms of low frequency reproduction. The V-cone provides wide acoustic dispersion, making the sound even more powerful. The forced ventilation system provided by the venting holes on the bottom plate, along with a specifically designed extended centre pole piece and the materials selected for the voice coil, combine for high thermal dissipation. The ultra-light aluminium basket, with its spoke shared profile, reduces any unwanted resonance from the chassis itself. The special finishing materials and the rubber protection covering the magnetic assembly, besides decreasing resonance, add an aggressive, stylistic cosmetic look. The engineered balance of the electro-acoustic parameters make the HX subwoofers suitable for sealed acoustic suspension enclosures as well as vented reflex enclosures, generating powerful, dynamic low frequency response.
Low incidence five spoke, anti-resonant aluminium alloy basket.
Front-Back gasket.
V-cone with Polypropylene membrane stiffened with mineral powders.
High excursion surround.
Black nomex spider.
Extended pole.
Aluminium former and high temperature pure copper voice coil.
Oversized motor with forced ventilation system.
Butyl rubber protective ring for acoustic damping.
Easy to access, oversized terminals for high-grade cable termination.
Peak power Handling [Watts]:
1200
RMS power Handling [Watts]:
600
Voice Coil(s):
Single
Impedance (per voice coil) [Ohm]:
4
Frequency Response [Hz]:
28-700
Top Mount Depth [inches]:
6.38
Cutout Diameter [inches]:
11.19
Xmax [millimeters]:
14
Subwoofer Design:
Round
Main Cone Color:
Black
Woofer Composition:
Polypropylene w/ Mica Injection
Woofer Surround:
Butyl Rubber
Recommended Enclosure Type (Ported / Vented and/or Sealed):
Ported / Vented or Sealed
Minimum Sealed Box Volume [cubic feet]:
0.61
Maximum Sealed Box Volume [cubic feet]:
0.93
Minimum Ported Box Volume [cubic feet]:
0.78
Maximum Ported Box Volume [cubic feet]:
1.24
** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------
Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recomend that you:
1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.
DO NOT proceed with a deal until you are completely satisfied with the other party.
DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.
07 Acura TL- PHD FB 4.1s for kicks and center, PHD AF 1.C TW for dash, big midbass, unk sub, saving up for Mosconi amps and Bitone.
95 Mustang- Gutted except Morel M428, Sub JL 10W6v2
In the pictures those look way bigger than the quoted Top Mount Depth [inches]:
6.38 and Minimum Sealed Box Volume [cubic feet]: 0.61. I know this sounds weird, but can you please verify that they are indeed that small? Also, What is the price for the remaining one, assuming the pending sale happens?
2004 Dodge RAM 1500 Quad Cab
Pioneer DEH-80PRS Head Unit
Audible Physics Nz3-A Widebands run by a Cerwin Vega EXL 350.2
Image Dynamics CX62v2 run by another Cerwin Vega EXL 350.2
Fi Audio X 10" Sub run by an Eclipse XA1000
In the pictures those look way bigger than the quoted Top Mount Depth [inches]:
6.38 and Minimum Sealed Box Volume [cubic feet]: 0.61. I know this sounds weird, but can you please verify that they are indeed that small? Also, What is the price for the remaining one, assuming the pending sale happens?
If i remember from bottom lip of the sub it's 6" from the top of the sub frame it's 6.38 and yes it will work in as little as .61 cuft.
TEAM BOTTLEHEAD - US Distributor for AUDIBLE PHYSICS - TEAM MUSEE - TEAM PHD
12" Hertz HX300 Subs (2)
Linear Mode
