The "Post what you have for FREE thread"

[SHAGGS]

Glad to see this thread take off again, it got alittle slow, awhile back. I'll get back to digging stuff out.

[Notloudenuf]

Went through my box of junk today.
I have:
1) HU wire harness for a '97 Civic
1) HU wire harness for a '01 Civic
1) HU wire harness for older fords (the one with 1 for the power/ground and another for speaker)
1) wire harness from an Eclipse CD1200 HU

PM me if you want anything and when I ship it I'll send you a copy of the receipt for reimbursement.

[illnastyimpreza]

Still have these available... I have 10 of them. 20 bucks shipped ! They are rectangle speakers already mounted in a box and wired. GREAT for a line aray project ! BRAND new never used em... I bought them for a line array project, but time got the best of me. They're from a Parts express buyout a couple years ago. IIRC they are pioneer speakers?

If no one wants them I'm throwing them away !
lemme know...

[Victor_inox]

I have 5x7 wcc680west cost customs components without tweeters, woofers and crossovers. yours for free, you pay shipping from 80126, 8LB in 20x14x8 box.
should be about $`15. everything brand new never been out of the box.
I bouth it on BB sale but I only need tweeters.
wcc made by diamond audio, nice aluminum woofers.pm or email if pmbox shows full.wccs spoken for.thanks for looking everyone
wcc- gone-

[DAT]

Let's Get this Thread going again...

[doobious62]

pm sent

[ChaunB3400]

Originally Posted by illnastyimpreza

Still have these available... I have 10 of them. 20 bucks shipped ! They are rectangle speakers already mounted in a box and wired. GREAT for a line aray project ! BRAND new never used em... I bought them for a line array project, but time got the best of me. They're from a Parts express buyout a couple years ago. IIRC they are pioneer speakers?

If no one wants them I'm throwing them away !
lemme know...

Just wanted to say thanx for these I will def put them to good use

[nar93da]

I'm putting this out there for an installer or someone with an 07-12 Nissan Altima with standard climate control. I'm got 15 or so of the double din dash pieces and 6 pockets. I work for Nissan and they were all pulled from cheap Altima's that don't have radio's from the factory.

Just letting anyone know as I think these fit and look better then the aftermarket kits available.

[nismos14]

Originally Posted by nar93da

I'm putting this out there for an installer or someone with an 07-12 Nissan Altima with standard climate control. I'm got 15 or so of the double din dash pieces and 6 pockets. I work for Nissan and they were all pulled from cheap Altima's that don't have radio's from the factory.

Just letting anyone know as I think these fit and look better then the aftermarket kits available.

I could use two of the dd dash kits, and 2 pockets. Let me know how much shipping is or whatever you want to 07080.

[f5racing]

Don't know if anyone needs it, but since I don't here it is.

Alpine RUE-4202 Remote. Came with a 117 I had a few years back.

Kicker ANL fuse holder. Part of a kit I used in my wife's jeep, before we sold it.


Both free to a good home, just shoot me a PM.



BOTH GONE, THANKS!

[nar93da]

Originally Posted by nismos14

I could use two of the dd dash kits, and 2 pockets. Let me know how much shipping is or whatever you want to 07080.

I check this evening what size of flat rate box they will fit in.

Sent from my DROID3

[TrickyRicky]

Originally Posted by f5racing

Don't know if anyone needs it, but since I don't here it is.

Alpine RUE-4202 Remote. Came with a 117 I had a few years back.

Kicker ANL fuse holder. Part of a kit I used in my wife's jeep, before we sold it.


Both free to a good home, just shoot me a PM.



BOTH GONE, THANKS!

Pm I'll take them.

[nar93da]

Still have 13 Altima OEM dash kits and 4 pockets.

I can fit 2 of each in a large flat rate box.

Sent from my DROID3

[ikoolguy]

sony mobile es amp 40x2 used really old school and made in japan. works perfectly missing screws for both terminals.

also debating to get let go (2) jl audio 300/4 and 300/4v2, one amp ohm lights won't turn off and the other one needs repair on the circuit board.

ported box for jl audio 8w7 without carpet.

[wrcrs24]

I'll take the v2 if you decide to let it go

[TrickyRicky]

Originally Posted by ikoolguy

sony mobile es amp 40x2 used really old school and made in japan. works perfectly missing screws for both terminals.

also debating to get let go (2) jl audio 300/4 and 300/4v2, one amp ohm lights won't turn off and the other one needs repair on the circuit board.

ported box for jl audio 8w7 without carpet.

Ohhh I just went to a pawn shop and am debating about buying a 4x40 Sony ES amp for 50.00, it gots spray paint (can't believe some idiot would do something like that).

I've fixed/repaired a few amps, and pretty sure I can get those JL's running if nothing serious is damaged (transformer or circuit board burnt/toasted).

If first dib fails, count me in for seconds.


Interested in the JL's (PM me and we can discuss it).

[Victor_inox]

Originally Posted by ikoolguy

sony mobile es amp 40x2 used really old school and made in japan. works perfectly missing screws for both terminals.

also debating to get let go (2) jl audio 300/4 and 300/4v2, one amp ohm lights won't turn off and the other one needs repair on the circuit board.

ported box for jl audio 8w7 without carpet.

I`d take that Sony if still available. please let me know.

[Ludemandan]

MTX 2-way active crossover. Fine except for some scratches and missing the speaker level input screws, which I don't presume you'll need anyway.





Available as long as the images are hosted. Prefer local pickup, or taker pays shipping.

[legend94]

Stinger fuse holder with fuse that came with something or someone gave it to me, who knows. I dont have any use for it so hopefully someone will. PM me because I likely will forget to check this thread. All I ask is you pay shipping usps after I send it cheapest way of course

[legend94]

fuse holder is gone!

[Ludemandan]

Crossover is claimed.

[Cruzer]

i have a kenwood kac-6202 manual, doubt anyone wants it but figured i try before throwing away

[msp95713]

anyone have an aftermarket radio they're looking to get rid of?

[jfrosty42]

Originally Posted by msp95713

anyone have an aftermarket radio they're looking to get rid of?

Post what you have, not what you want.

[nadams5755]

ID IDQ10 D4 V1, one of the voice coils is dead. free to a good home.