DIYMobileAudio.com Car Stereo Forum banner

DIY Acoustic Panels

11K views 2 replies 2 participants last post by  minibox 
#1 ·
This is a simple project that yields some fantastic results. My listening room is 11' X 10' so obviously it's not the ideal environment for a two channel system. This has been the cheapest and best investment so far for improving the overall quality of the sound.

How to Build Your Own Acoustic Panels (DIY) | AcousticsFREQ.com



The panel in the middle is in front of my seldom used flat screen. Please excuse the messy wires for now. Power conditioning is on it's way.
 
See less See more
1
#3 ·
4 panels total. I used two 2 inch pieces of Roxul to make each of the corner bass traps. I used the remaining two pieces of Roxul to make 2 inch panels mounted on the side walls.

Those are the Aerial Model 6's I've been demoing and will be buying. I like them so much that I'm trading in my Vandersteen Model 1C's, which have been great too.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top