Audi A3 SQ installation - Page 4

Konni · 11-18-2008

Quote:

Originally Posted by Candisa

I will (I sold the Clio so I have to start all over again...)

Good luck with your new car and your new install. =)

Cheers,
Konni

Konni · 04-07-2009

Got new tweeters ...

Cheers
Konni

quality_sound · 04-07-2009

Are both tweeters on axis with the driver and not firing at the same angles?

pwnt by pat · 04-07-2009

looks like it. Done right.

Konni · 04-08-2009

Both tweeters are angled directly towards my ears. Left one to the left ear and right one on the right ear. Otherwise I "lose" a lot of the frequencies from 10 to 20 KHz. This way I have a very good and dynamic high range. Off-axis angling would cut the upper range, so I angled them on my ears.
This is very often seen in German SQ cars. Most tweeters are angled on axis to the ears.

Cheers
Konni

quality_sound · 04-08-2009

Quote:

Originally Posted by Konni

Both tweeters are angled directly towards my ears. Left one to the left ear and right one on the right ear. Otherwise I "lose" a lot of the frequencies from 10 to 20 KHz. This way I have a very good and dynamic high range. Off-axis angling would cut the upper range, so I angled them on my ears.
This is very often seen in German SQ cars. Most tweeters are angled on axis to the ears.

Cheers
Konni

I totally agree with this, I just don't see it done much. I tried a quasi-cross firing scheme in my car and I'm going to do an on-axis setup because, as you mentioned, the top end is dropping off and I'm losing detail. I can deal with the difference in amplitude in other ways.

Great looking install.

Paul

Konni · 07-11-2009

Some news ... I changed recently from 2-way to 3-way front system. The mids are the new Scan Speak Discovery 10F.

Greetings from Germany
Konni

hc_TK · 07-11-2009

that looks like something ive seen before..

Looks realy good. How does those scan's sound?
What do you think of 2way vs 3-way?

pyr0maniac · 09-18-2009

Wow, I love you Konni

art-audio · 12-03-2009

Hi Konni,

It´s great to see you also here!

TW: µP 5.28 MK II or 7.28 MK III?

Greetings also from Germany

Sven

bmwproboi05 · 12-16-2009

what kind of distro block is that you are using?

Konni · 02-09-2010

Quote:

Originally Posted by bmwproboi05

what kind of distro block is that you are using?

This distribution block is from Audison Connection. This is very good stuff and looks good.

@art-audio
Hi Sven,
nice to see you here ...

Cheers,
Konni

Menace Kustoms · 02-09-2010

I'm assuming that you re-wrapped the doors after adding the mids? They look great.

cgw · 02-09-2010

Very nice!!!!!!

Is your 2003 A3 the new model or older model, 8L, 8P?????

**dtm337** · 02-09-2010

wow the door panels are the fucking shit ..........sorry guys i had to .

Konni · 02-10-2010

Quote:

Originally Posted by Menace Kustoms

I'm assuming that you re-wrapped the doors after adding the mids? They look great.

Only the top part of the door panel.

@cgw
It's the "newer" 8P model.

@dtm337
Thanks!

Cheers,
Konni

Menace Kustoms · 02-10-2010

Well, you did a fantastic job. It's very seamless, like the OEM put it there. I like it a lot.

Gangsta · 3 Weeks Ago

Hi... Konni, I am confused between 7 series & Z series. Can you please tell me what i the major difference in both the drivers?

04-07-2009	#77
Konni DIYMA freshman Join Date: Jun 2008 Location: Germany Age: 27 Posts: 46 iTrader: (0)	Re: Audi A3 SQ installation Got new tweeters ... Cheers Konni
	Pioneer DEX-P90 + DEQ-P90 Tru Steel S44 @ Goerlich / Micro-Precision speakers my Audi A3 SQ install

04-07-2009	#78
quality_sound DIYMA Addict Join Date: Dec 2005 Location: Ramstein AB, Germany Age: 35 Posts: 5,295 iTrader: (29)	Re: Audi A3 SQ installation Are both tweeters on axis with the driver and not firing at the same angles?
	Ramstein Air Base, Germany USAF AMMO - I know what REAL boom is. I.Y.A.A.Y.A.S.!

04-07-2009	#79
pwnt by pat DIYMA Novice Join Date: Mar 2006 Location: Pittsburgh Posts: 633 iTrader: (1)	Re: Audi A3 SQ installation looks like it. Done right.

04-08-2009	#80
Konni DIYMA freshman Join Date: Jun 2008 Location: Germany Age: 27 Posts: 46 iTrader: (0)	Re: Audi A3 SQ installation Both tweeters are angled directly towards my ears. Left one to the left ear and right one on the right ear. Otherwise I "lose" a lot of the frequencies from 10 to 20 KHz. This way I have a very good and dynamic high range. Off-axis angling would cut the upper range, so I angled them on my ears. This is very often seen in German SQ cars. Most tweeters are angled on axis to the ears. Cheers Konni
	Pioneer DEX-P90 + DEQ-P90 Tru Steel S44 @ Goerlich / Micro-Precision speakers my Audi A3 SQ install

07-11-2009	#82
Konni DIYMA freshman Join Date: Jun 2008 Location: Germany Age: 27 Posts: 46 iTrader: (0)	Re: Audi A3 SQ installation Some news ... I changed recently from 2-way to 3-way front system. The mids are the new Scan Speak Discovery 10F. Greetings from Germany Konni
	Pioneer DEX-P90 + DEQ-P90 Tru Steel S44 @ Goerlich / Micro-Precision speakers my Audi A3 SQ install

07-11-2009	#83
hc_TK DIYMA Novice Join Date: Jan 2006 Location: Norway Age: 23 Posts: 440 iTrader: (0)	Re: Audi A3 SQ installation that looks like something ive seen before.. Looks realy good. How does those scan's sound? What do you think of 2way vs 3-way?
	/////Alpine, Stinger, Peerless, Seas, Focal, Supra Cables Project SQ Audi A3: http://www.diymobileaudio.com/forum/...ead.php?t=4934

09-18-2009	#84
pyr0maniac DIYMA freshman Join Date: Jan 2009 Location: australia Posts: 29 iTrader: (0)	Re: Audi A3 SQ installation Wow, I love you Konni

12-03-2009	#85
art-audio DIYMA freshman Join Date: Jul 2009 Location: Germany Posts: 1 iTrader: (0)	Re: Audi A3 SQ installation Hi Konni, It´s great to see you also here! TW: µP 5.28 MK II or 7.28 MK III? Greetings also from Germany Sven

12-16-2009	#86
bmwproboi05 DIYMA Novice Join Date: May 2009 Location: okc Posts: 385 iTrader: (3)	Re: Audi A3 SQ installation what kind of distro block is that you are using?
	What audio are you talking about?

02-09-2010	#88
Menace Kustoms DIYMA freshman Join Date: Jan 2010 Location: So. Cal. Age: 27 Posts: 89 iTrader: (0)	Re: Audi A3 SQ installation I'm assuming that you re-wrapped the doors after adding the mids? They look great.
	Josh 2007 Pontiac G5 2.2L Factory Pioneer system for now . . .

02-09-2010	#89
cgw DIYMA freshman Join Date: Jan 2009 Location: Brazil Posts: 40 iTrader: (0)	Re: Audi A3 SQ installation Very nice!!!!!! Is your 2003 A3 the new model or older model, 8L, 8P?????

02-09-2010	#90
dtm337 slacker Join Date: May 2009 Location: nh Posts: 233 12V Company: dtm autowerks Position: owner iTrader: (4)	Re: Audi A3 SQ installation wow the door panels are the fucking shit ..........sorry guys i had to .
	eclipse avn-hat l1pro-hat l6-pc4100-i-pauldm2000-re10x2

02-10-2010	#92
Menace Kustoms DIYMA freshman Join Date: Jan 2010 Location: So. Cal. Age: 27 Posts: 89 iTrader: (0)	Re: Audi A3 SQ installation Well, you did a fantastic job. It's very seamless, like the OEM put it there. I like it a lot.
	Josh 2007 Pontiac G5 2.2L Factory Pioneer system for now . . .

3 Weeks Ago	#93
Gangsta DIYMA freshman Join Date: May 2009 Location: I.C.E Land Posts: 30 iTrader: (0)	Re: Audi A3 SQ installation Hi... Konni, I am confused between 7 series & Z series. Can you please tell me what i the major difference in both the drivers?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anybody here drive an Audi?	Kenny_Cox	Off Topic	52	05-17-2008 11:14 AM
Audi Midbass Installation ????'s	AWC	DIYMA Fabrication	3	05-15-2008 12:27 PM
FS: Audi Dice, iPod video cradle and Panavise for sale...	ecalcagnino	Classifieds	0	11-28-2007 05:31 PM
FS: Audi Dice, iPod video cradle and Panavise for sale...	ecalcagnino	Classifieds	0	11-27-2007 02:48 PM
Caddy STS installation - trunk & LCD	MarkZ	DIYMA Build Logs	8	03-09-2006 12:42 AM