My Polaris RZR Side by Side

[crnacnac]

After doing installs for the past couple of years in ALL of friend's Side by Sides, it is finally my turn to do my own install on my recently purchased RZR. The difference in this install is labor will not be a limiting factor

First off, the factory cage, seats and seatbelts where trashed and replaced with a custom cage br SDR Motorsports, seats by Jettrim, and Crow 5 point Y3" harnesses. There will be a linear actuated light bar contolled by the dual horn buttons on the Momo steering wheel.

(In these pics the cage, aluminum doors and aluminum roof are not done)

On to the good stuff. Product to be installed:

/////ALPINE

iDA-X001
PDX-2.150
PDX-1.1000
(2)SPX-17REF
(2)SWS-1023D
TME-M750A

Other product to be installed as of right now, Optima yellow top, Lowrance Global Map 3500c GPS, four 4" HIDS, and a long travel kit.

[Tonyguy]

Nice! I can't wait to see how well yours comes out after your friends ended up really nice.

[crnacnac]

Originally Posted by Tonyguy

Nice! I can't wait to see how well yours comes out after your friends ended up really nice.

Thank you.

Now, where to put all this gear

[crnacnac]

[crnacnac]

[crnacnac]

[jdc753]

Nice looking machine and good list of gear too.

very nice so far. Looking forward to seeing the rest of the progress.

[Echo42987]

VERY VERY nice so far

[crnacnac]

Thanks guys.

I changed up the mounting of the actuator by clocking it 45 degrees and raising the pivot point of the lever. I'm going to add a headliner in addition to the aluminum roof and a Chevy Blazer overhead console. By doing this the actuator will be completely hidden.

[Echo42987]

MAN! W/ all of this work I hope it's a daily driver lol

[crnacnac]

This is NOT a hanger queen

[syd-monster]

wow.... being one of the foreing guys here (Aussie) I didn't even know people did work on these sorts of vehicles.







(...mind you this is coming from a person who helped put a system in a forklift!)

[crnacnac]

There will be a reverse image camera hooked up to the monitor on aux 1 for my view view mirror. An ipod will be on aux 2 for photos or videos. Audio input will be through the Ai port on X-001.

[crnacnac]

Oil pressure and coolant temp gauges will be used, just using these for mock up.

[crnacnac]

[crnacnac]

[rockinridgeline]

lovin' the creativity. Keep it coming.

[fallbrookchris]

Too Cool! but what is the actuator for, I see its attacked to something that will come down over the front windshield area but for the life of me can't figure out what the point is

Glad to see that you aren't going overboard and spending too much money on a toy that will spend 99% of its life parked in the garage, I can't stand people doing crazy stupid stuff just cause...lol

[crnacnac]

Originally Posted by fallbrookchris

Too Cool! but what is the actuator for, I see its attacked to something that will come down over the front windshield area but for the life of me can't figure out what the point is

Glad to see that you aren't going overboard and spending too much money on a toy that will spend 99% of its life parked in the garage, I can't stand people doing crazy stupid stuff just cause...lol

The actuator is to control my lightbar with four 4" HID's. For "on the fly" adjustment. It will be done by switching polarity with 2 relays. It will be controlled by separate ground signals from the 2 horns buttons on the Momo wheel.

This baby will be used at Glamis Sand dunes every other weekend starting Halloween and ending around Easter. Then it's off to Parker AZ river house for night rides in the desert right from my bud's house all summer long. And it's street legal registered in AZ

[Echo42987]

damn your putting a lot of work into that thing!

[8675309]

Looking good. Nice job keeping your foot room with the box. Nice to keep things high if you decide to hit the trails and hit some water.

[bafukie]

amazing stuff... its like custom building ur own car

[crnacnac]

[crnacnac]

[crnacnac]

190 hours in and I have my first piece installed for good. I'm on a roll now.