3 Channel Stereo Mode on Zapco DC650.6

[socal75]

I would like to bridge channels 1+2, 3+4 and 5+6 on a Zapco DC650.6. If I do then can the summed channels of 1+2 be my left stage while the 3+4 is my right? I would then use the 5+6 for a sub. Basically I want to bridge for the power but I want to maintain stereo output.

[el_chupo_]

I have to ask: Why would you buy an amp like the DC series and not use the features it has? Are you simply looking for more power?

[Genxx]

Are you going to be using this to run a passive set-up.

To bridge a DC there is a pull down that you need to select what you want.

I am at work so I do not have the program in front of me. If you still can not find it I will look at the program when I get home.

[azngotskills]

^^^agreed but to answer your question, yes you can run it the way you described and just make sure your assign your inputs and outputs correctly

[socal75]

I intend to initially run passive to my Morel Elate 3ways but want the capability to run active in the future. I also want to go with the DC series for the on-board DSP features.