The new HiFi4250D is a full-range class d 4 channel amplifier featuring high efficiency and Burr Brown.
250 x 4 @ 4 ohms RMS
450 x 4 @ 2 ohms RMS
900 x 2 @ 4 ohms RMS
10" x 9.5 x 2.25" www.mmatsproaudio.com
Can this be bridged down to a 2 ohm load for a sub and if so how much power we talking? Any other specs on the amp? ie. signal to noise ratio, damping factor, thd. Another thing for me personally, what is the distance between the mounting points on each side?
Can this be bridged down to a 2 ohm load for a sub and if so how much power we talking? Any other specs on the amp? ie. signal to noise ratio, damping factor, thd. Another thing for me personally, what is the distance between the mounting points on each side?
Yes you can bridge at 4ohm load for 900 watts I will post other info hopefully tomorrow. Spending time with the kids right now
Yes you can bridge at 4ohm load for 900 watts I will post other info hopefully tomorrow. Spending time with the kids right now
Be with your kids, that's more important for sure. I was wondering about bridging down to a 2 ohm load tho... I did see the 900 watts at 4 ohm that you posted at the top of the thread. My sub is 2 ohm tho. I do look forward to more specs later on
Be with your kids, that's more important for sure. I was wondering about bridging down to a 2 ohm load tho... I did see the 900 watts at 4 ohm that you posted at the top of the thread. My sub is 2 ohm tho. I do look forward to more specs later on
Seeing that much power out of that footprint... I wouldn't count on a 2 ohm bridge stable amp. Unless it does exactly the same power as the 4 ohm bridged channels.
Kelvin
Lycan
Quote:
I'll repeat it for the miliionth time : All amps do NOT sound the same ... It's astonishing to me that nobody understands this
Thats alot of power in a small foot print. I dont dig the cheap speaker plugs and the jumbled controls right next to the RCA inputs. For 1200 bucks, I personally would expect some more refinement. This is all just my opinion and I am not indicating anything about the performance of the amp.
Thats alot of power in a small foot print. I dont dig the cheap speaker plugs and the jumbled controls right next to the RCA inputs. For 1200 bucks, I personally would expect some more refinement. This is all just my opinion and I am not indicating anything about the performance of the amp.
We appreciate and will consider your opinion in future projects.
Thats alot of power in a small foot print. I dont dig the cheap speaker plugs and the jumbled controls right next to the RCA inputs. For 1200 bucks, I personally would expect some more refinement. This is all just my opinion and I am not indicating anything about the performance of the amp.
Also, because of the layout, the controls have to be in that position due to the internals of the amp.
Can this be bridged down to a 2 ohm load for a sub and if so how much power we talking? Any other specs on the amp? ie. signal to noise ratio, damping factor, thd. Another thing for me personally, what is the distance between the mounting points on each side?
(MMATS)
HiFi4250 4 Channel 250 x 4
Linear Mode
