reconing options for brahma 12d4 mkiv

[jw408]

Ok, earlier in my car audio escapades I didn't own an osilloscope, nor did I know how to properly set gains.

So, I've got a Brahma 12d4 mkiv in a Subtomix (cylindrical tube like a drum) .75 cu ft enclosure with one side having broken tinsel lead and probably some voice coil rub.

I've watched a number of reconing videos on youtube and it seems like I could handle reconing-- the big deal is getting the parts and the proper glue. Since Adire is long gone, anyone have any options? I don't want to compromise the parameters of this sub, if I need to I'll get a new sub and enclosure, rather than end up with something bad.

System:

2005 Jaguar S-type R
Factory head unit -> Rockford Fosgate 3sixty.2 ->
Zed Draconia w/Burr Brown upgrade feeding Morel Hybrid Ovations ACTIVE
Hifonics 2006d -> Brahma 12D4

I've tried to contact Fi, but haven't heard back ( the mk iv has a 2.5" voice coil vs the 3" for the mark II)

my big box store, and most local installers, look at me blankly when I ask about reconing or preserving a flat BL curve.

[Mr.Lovr]

the best Fix My speaker - Custom subwoofer Rebuilds, Repairs, and Supplies!
talk to them they definately do talk back , and no bs talk either awesome guys

[King Nothing]

If you ask this question on caraudio.com you will get plenty of answers. fixmyspeaker.com and there is a guy called splaudio over there that does good work

[jw408]

thanks much guys!