DIYMobileAudio.com Car Stereo Forum banner

Starter crossover points?

749 views 3 replies 3 participants last post by  WuNgUn 
#1 ·
Going to be running ID OEM mids that I bought off of Hessdawg:
http://www.diymobileaudio.com/forum/showthread.php?t=20648&highlight=OEM

And Seas 27TIFFNC/G (H1396) Textile dome tweeters:
http://www.madisound.com/catalog/product_info.php?cPath=45_229_270_324&products_id=1466

Wondering what I should use for crossover points to start off with.

Thinking maybe:
Mids - 80hz to 2.5k (12 db slope?)
Tweeters - 3k (12 db slope?)

Does this sound right for these drivers? Please help me get some starting points!
 
#4 ·
I'd probably go a little further up the band than that...but your not going to find a magical x-over combination that'll work for all components and staging...
Also try 100Hz to 3.5KHz on those mids, maybe even 8 to 18dB slope and
4KHz on the tweets with 16 or 18dB slope...
Play around with it in those ranges with a variety of music and see what you like...
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top