hi guys, i have a question, should i use the crossover on the deck or amp?
right now i am usion the crossover settings on the pioneer deh-p8600mp deck, and my jl audio 300/2, 2 of them,one for front and one for back, the crossover settings on the amp are on the off settings, should i bypass the deck and use the amp crossover, or should i leave it right now?
front i have a/d/s/ 346is woofers and passive crossover, but replace the tweeter with focal tn-52, i have the tweet level on the passive crossover at -3db(low setting), have the woofer on the car setting. should i use the demo setting at all?
back speakers are a/d/s/ 336im with passive crossover.
im keepin my sub settings on the deck at 80hz at -18db slope ate 0, jl 500/1 setting are low pass 80hz, 1.6q 60hz center and +3 boost infrasonic is on at 30hz, have 2 12w3v2 in the h.o box.