Quote:
Originally Posted by ckirocz28 View Post
Good thinking there, a nice way to determine minimum pipe diameter.
The only caveat I can think of is the extra chamber a conventional port plays into normally is huge like a cars cabin, so a smaller volume of air may have a negative effect on the ‘tuning’ of the ‘not a port’ if you see what I mean, kind of like when doing spl walls the cabins tuning effects results and tuning more so than a street 2cu ft box if you see what I mean...

Ideally I’d want to use the sd of the driver, but appreciate it may not be so ideal and may not fit so well... for example a ten would ideally need an eight inch tube I’d guess...