2017 jeep jk slow new build - Car Audio | DiyMobileAudio.com | Car Stereo Forum

Reply
 
LinkBack Thread Tools Display Modes
Old 05-13-2017   #1
Upgrade Your Membership!
 
toneloc2's Avatar
 
Member
Join Date: Nov 2015
Location: vernon bc
Posts: 374

Thanks: 11
Thanked 109 Times in 80 Posts
Rep Power: 54 toneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enough


iTrader: (7)



Default 2017 jeep jk slow new build

well im excited to start my new build,,, this will be a slow one do to working night shifts,,,, had this baby for almost 3 weeks now,,, dealer has had it for 2 of them do to factory wiring issues,,,,,
will be re using equipment from my last jeep,,,,,,
day one, tear down,,, day two first layer of deadener, then second layer with focal bam xl,,,, ordering some second-skin mlv this week for the third layer,,,
i have a question to you all,, being that no door speakers will go in the doors, how much deadener should i use on them?
hoping to start running my wires tomorrow or at least figure the layout,,,,, any input would be much appreciated,,, threw out this build...
Attached Images
File Type: jpg 1.jpg (103.4 KB, 302 views)
File Type: jpg 2.jpg (111.4 KB, 261 views)
File Type: jpg 3.jpg (80.1 KB, 310 views)
File Type: jpg 4.jpg (66.6 KB, 296 views)
File Type: jpg 6.jpg (88.2 KB, 301 views)
File Type: jpg 7.jpg (101.3 KB, 295 views)

https://www.diymobileaudio.com/forum/...new-build.html
8201nex dsp pro mk2 director,
zapco 150.6 ap zapco z-3kd-2
gb10, gb25, gb60, 2x gb10d2
toneloc2 is offline   Reply With Quote Quick reply to this message
The Following User Says Thank You to toneloc2 For This Useful Post:
diy.phil (05-21-2017)
Sponsored Links
Advertisement
 
Old 05-14-2017   #2
 
DavidRam's Avatar
 
Enthusiast
Join Date: Nov 2014
Location: SoCal - Redondo Beach
Age: 44
Posts: 3,245

Thanks: 2,060
Thanked 736 Times in 546 Posts
Rep Power: 101 DavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the rough


iTrader: (15)



Default

Congrats on the new JK! I look forward to watching this build...
DavidRam is online now   Reply With Quote Quick reply to this message
Old 05-14-2017   #3
Upgrade Your Membership!
 
toneloc2's Avatar
 
Member
Join Date: Nov 2015
Location: vernon bc
Posts: 374

Thanks: 11
Thanked 109 Times in 80 Posts
Rep Power: 54 toneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enough


iTrader: (7)



Default Re: 2017 jeep jk slow new build

i was hoping you would chime in bud,,, was going to ask about your tweeter mount choice,,,,, did you try firing them up and how did that sound to you,,, or were you have them now the best choice? was thinking of picking up the utopia mids then doing mid tweet in the pillars,,,, did you put deadener in your doors?

https://www.diymobileaudio.com/forum/...new-build.html
8201nex dsp pro mk2 director,
zapco 150.6 ap zapco z-3kd-2
gb10, gb25, gb60, 2x gb10d2
toneloc2 is offline   Reply With Quote Quick reply to this message
 
Old 05-21-2017   #4
Upgrade Your Membership!
 
toneloc2's Avatar
 
Member
Join Date: Nov 2015
Location: vernon bc
Posts: 374

Thanks: 11
Thanked 109 Times in 80 Posts
Rep Power: 54 toneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enough


iTrader: (7)



Default Re: 2017 jeep jk slow new build

little more up date,,,, finished with deadener all panels inside doors plus door card,,,, then the sides and floor got a layer of hardwood underlay,,its a layer of flex carpet that is tacky on both sides and molds well,,,, picked that up from Rona hardware store,,,, ran all my wire from front to back,,,, plus camera wire... started playing with speaker pods,, plus deciding how i'm going to fiber glass the tweet pods, either on the stock dash plates or on the pillars. then the new amp and sub box to design,,, that's the update..
Attached Images
File Type: jpg 9.jpg (76.0 KB, 222 views)
File Type: jpg 10.jpg (93.9 KB, 218 views)
File Type: jpg 11.jpg (103.8 KB, 209 views)
File Type: jpg 12.jpg (97.9 KB, 202 views)
File Type: jpg 13.jpg (53.7 KB, 237 views)
File Type: jpg 14.jpg (76.3 KB, 219 views)

https://www.diymobileaudio.com/forum/...new-build.html
8201nex dsp pro mk2 director,
zapco 150.6 ap zapco z-3kd-2
gb10, gb25, gb60, 2x gb10d2
toneloc2 is offline   Reply With Quote Quick reply to this message
The Following 2 Users Say Thank You to toneloc2 For This Useful Post:
DavidRam (05-21-2017), diy.phil (05-21-2017)
Old 05-21-2017   #5
 
DavidRam's Avatar
 
Enthusiast
Join Date: Nov 2014
Location: SoCal - Redondo Beach
Age: 44
Posts: 3,245

Thanks: 2,060
Thanked 736 Times in 546 Posts
Rep Power: 101 DavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the rough


iTrader: (15)



Default Re: 2017 jeep jk slow new build

Quote:
Originally Posted by toneloc2 View Post
i was hoping you would chime in bud,,, was going to ask about your tweeter mount choice,,,,, did you try firing them up and how did that sound to you,,, or were you have them now the best choice? was thinking of picking up the utopia mids then doing mid tweet in the pillars,,,, did you put deadener in your doors?
Sorry I missed this post...

I did have the tweeters firing up from the stock locations at first, but I much prefer the way the tweeters sound on the dash as they are now.
I did fully deaden my doors...

Man, I would love to see the Utopia mids and tweeters in the A pillar! It looks like your build is coming along great so far...

2018 Jeep GC - AF GB10s, GB25s, GS690s, Zapco & Mosconi amps, (2) AF GB12s, Helix Pro MK2 & Director, Fiio X5
My wife was furious when she overheard me say I want to do a 3 way in my Jeep
DavidRam is online now   Reply With Quote Quick reply to this message
Old 05-26-2017   #6
Upgrade Your Membership!
 
toneloc2's Avatar
 
Member
Join Date: Nov 2015
Location: vernon bc
Posts: 374

Thanks: 11
Thanked 109 Times in 80 Posts
Rep Power: 54 toneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enough


iTrader: (7)



Default Re: 2017 jeep jk slow new build

another small update,,,, camera is mounted tweeters are in place for stage set up mids are in the pods and back in,,,, had to put my old sub box back in because the amps are mounted on the back side, this is temporary till i set the tweets in proper place and angle, then plan on fiber glassing them in place as well glassing up a new sub box in the storage well in back and new amp rack,,, hope to have time in the next couple weeks,,,,
Attached Images
File Type: jpg 15.jpg (67.3 KB, 245 views)
File Type: jpg 16.jpg (76.5 KB, 292 views)
File Type: jpg 17.jpg (86.9 KB, 266 views)
File Type: jpg 18.jpg (73.9 KB, 272 views)
File Type: jpg 19.jpg (57.2 KB, 289 views)
File Type: jpg 20.jpg (56.6 KB, 265 views)

https://www.diymobileaudio.com/forum/...new-build.html
8201nex dsp pro mk2 director,
zapco 150.6 ap zapco z-3kd-2
gb10, gb25, gb60, 2x gb10d2
toneloc2 is offline   Reply With Quote Quick reply to this message
Old 06-16-2017   #7
Upgrade Your Membership!
 
toneloc2's Avatar
 
Member
Join Date: Nov 2015
Location: vernon bc
Posts: 374

Thanks: 11
Thanked 109 Times in 80 Posts
Rep Power: 54 toneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enough


iTrader: (7)



Default Re: 2017 jeep jk slow new build

sorry for lack of updates been so busy with work last 2 weeks, finally had some time to work o sub box,,, i put the tweets on the back burner for now,,,,
hope to get some sanding in tomorrow for the sub box,,, then line it with focal bam and seal it up, fathers day on sunday hope to get back on those tweets and amp rack,,,
Attached Images
File Type: jpg 21.jpg (45.7 KB, 204 views)
File Type: jpg 22.jpg (42.3 KB, 186 views)
File Type: jpg 23.jpg (37.5 KB, 182 views)
File Type: jpg 25.jpg (45.9 KB, 182 views)
File Type: jpg 26.jpg (54.5 KB, 184 views)
File Type: jpg 27.jpg (58.5 KB, 216 views)
File Type: jpg 28.jpg (63.9 KB, 205 views)
File Type: jpg 29.jpg (64.4 KB, 224 views)

https://www.diymobileaudio.com/forum/...new-build.html
8201nex dsp pro mk2 director,
zapco 150.6 ap zapco z-3kd-2
gb10, gb25, gb60, 2x gb10d2
toneloc2 is offline   Reply With Quote Quick reply to this message
Old 06-17-2017   #8
 
DavidRam's Avatar
 
Enthusiast
Join Date: Nov 2014
Location: SoCal - Redondo Beach
Age: 44
Posts: 3,245

Thanks: 2,060
Thanked 736 Times in 546 Posts
Rep Power: 101 DavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the roughDavidRam is a jewel in the rough


iTrader: (15)



Default Re: 2017 jeep jk slow new build

Quote:
Originally Posted by toneloc2 View Post
sorry for lack of updates been so busy with work last 2 weeks, finally had some time to work o sub box,,, i put the tweets on the back burner for now,,,,
hope to get some sanding in tomorrow for the sub box,,, then line it with focal bam and seal it up, fathers day on sunday hope to get back on those tweets and amp rack,,,
Looking good, man! How much air space are you gonna get out of that?

2018 Jeep GC - AF GB10s, GB25s, GS690s, Zapco & Mosconi amps, (2) AF GB12s, Helix Pro MK2 & Director, Fiio X5
My wife was furious when she overheard me say I want to do a 3 way in my Jeep
DavidRam is online now   Reply With Quote Quick reply to this message
Old 06-18-2017   #9
Upgrade Your Membership!
 
toneloc2's Avatar
 
Member
Join Date: Nov 2015
Location: vernon bc
Posts: 374

Thanks: 11
Thanked 109 Times in 80 Posts
Rep Power: 54 toneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enough


iTrader: (7)



Default Re: 2017 jeep jk slow new build

Quote:
Originally Posted by DavidRam View Post
Looking good, man! How much air space are you gonna get out of that?
its 2 inches above floor measured at 33 liters so about 1.2 cf
had some time today so was able to get it sanded,,,, tomorrow starting on amp rack,,,,,
haven't decided whether i'm going to carpet or venal it....
thanks by the way...

https://www.diymobileaudio.com/forum/...new-build.html
8201nex dsp pro mk2 director,
zapco 150.6 ap zapco z-3kd-2
gb10, gb25, gb60, 2x gb10d2
toneloc2 is offline   Reply With Quote Quick reply to this message
Old 06-18-2017   #10
Upgrade Your Membership!
 
toneloc2's Avatar
 
Member
Join Date: Nov 2015
Location: vernon bc
Posts: 374

Thanks: 11
Thanked 109 Times in 80 Posts
Rep Power: 54 toneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enough


iTrader: (7)



Default Re: 2017 jeep jk slow new build

finished sanding the box today,,, and managed to start the amp area,, mounted the amps and ran the power & ground to them,,,, cut up the storage tub to retain the cover portion of the jack..... ran out of mdf today for the top of amp rack,,,,,,, mmmmmm i could almost hear the music...
Attached Images
File Type: jpg 30.jpg (56.3 KB, 169 views)
File Type: jpg 31.jpg (68.7 KB, 169 views)
File Type: jpg 32.jpg (70.5 KB, 158 views)
File Type: jpg 33.jpg (54.0 KB, 172 views)

https://www.diymobileaudio.com/forum/...new-build.html
8201nex dsp pro mk2 director,
zapco 150.6 ap zapco z-3kd-2
gb10, gb25, gb60, 2x gb10d2
toneloc2 is offline   Reply With Quote Quick reply to this message
Old 07-08-2017   #11
Upgrade Your Membership!
 
toneloc2's Avatar
 
Member
Join Date: Nov 2015
Location: vernon bc
Posts: 374

Thanks: 11
Thanked 109 Times in 80 Posts
Rep Power: 54 toneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enough


iTrader: (7)



Default Re: 2017 jeep jk slow new build

well haven't done much in the way of install, mostly just tuning and tweeter angling. i feel i'm missing a little something upfront, so i pulled the trigger on a set of focal kx3 mid-ranges, not my first choice did want the utopia ones but at $700 cdn, just for them, the kx3 are 200 less so there on there way,,,, also the focal tweet and mid pod i figured that would give me a good start point for mounting to the a pillars with a little glass work,,,, o ya another alpine pdx f4 to run them,,,, damm that amp rack only holds 3 so might do a little rework there,,,, never was a good plan maker,,,,

https://www.diymobileaudio.com/forum/...new-build.html
8201nex dsp pro mk2 director,
zapco 150.6 ap zapco z-3kd-2
gb10, gb25, gb60, 2x gb10d2
toneloc2 is offline   Reply With Quote Quick reply to this message
Old 07-08-2017   #12
DIYMA 500 Club
 
chithead's Avatar
 
Enthusiast
Join Date: Mar 2008
Location: Concord, NC
Age: 38
Posts: 3,403

Thanks: 539
Thanked 160 Times in 118 Posts
Rep Power: 187 chithead is a glorious beacon of lightchithead is a glorious beacon of lightchithead is a glorious beacon of lightchithead is a glorious beacon of lightchithead is a glorious beacon of lightchithead is a glorious beacon of lightchithead is a glorious beacon of lightchithead is a glorious beacon of lightchithead is a glorious beacon of lightchithead is a glorious beacon of lightchithead is a glorious beacon of light


iTrader: (86)



Default Re: 2017 jeep jk slow new build

That's good stuff right there!

"Pushy" has a completely different definition when Sean Connery says it.

chithead is offline   Reply With Quote Quick reply to this message
Old 07-08-2017   #13
Upgrade Your Membership!
 
toneloc2's Avatar
 
Member
Join Date: Nov 2015
Location: vernon bc
Posts: 374

Thanks: 11
Thanked 109 Times in 80 Posts
Rep Power: 54 toneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enough


iTrader: (7)



Default Re: 2017 jeep jk slow new build

thanks chithead,, i really liked the sound of everything but for some reason going from the four door to the two door i lost a little clarity,, way more deadening in this one,,, im hoping the three way will help this,,,,

https://www.diymobileaudio.com/forum/...new-build.html
8201nex dsp pro mk2 director,
zapco 150.6 ap zapco z-3kd-2
gb10, gb25, gb60, 2x gb10d2
toneloc2 is offline   Reply With Quote Quick reply to this message
Old 07-08-2017   #14
 
Newbie
Join Date: Jan 2017
Location: Wn-Slm, NC
Posts: 13

Thanks: 3
Thanked 1 Time in 1 Post
Rep Power: 0 murphmobile will become famous soon enoughmurphmobile will become famous soon enoughmurphmobile will become famous soon enoughmurphmobile will become famous soon enoughmurphmobile will become famous soon enoughmurphmobile will become famous soon enough


iTrader: (0)



Default Re: 2017 jeep jk slow new build

nice lookin' rig...
murphmobile is offline   Reply With Quote Quick reply to this message
Old 07-08-2017   #15
Upgrade Your Membership!
 
toneloc2's Avatar
 
Member
Join Date: Nov 2015
Location: vernon bc
Posts: 374

Thanks: 11
Thanked 109 Times in 80 Posts
Rep Power: 54 toneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enough


iTrader: (7)



Default Re: 2017 jeep jk slow new build

Quote:
Originally Posted by murphmobile View Post
nice lookin' rig...
thanks murphmobile....

https://www.diymobileaudio.com/forum/...new-build.html
8201nex dsp pro mk2 director,
zapco 150.6 ap zapco z-3kd-2
gb10, gb25, gb60, 2x gb10d2
toneloc2 is offline   Reply With Quote Quick reply to this message
Old 07-09-2017   #16
 
Newbie
Join Date: Jul 2017
Location: Canada
Posts: 42

Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 32 C0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enough


iTrader: (0)



Default Re: 2017 jeep jk slow new build

Quote:
Originally Posted by DavidRam View Post
Looking good, man! How much air space are you gonna get out of that?
also curious to this Ive never done inverted nor listened to them but if i could drop a focal in I would wanna show it off too! also nice amp rack doesnt look like u can fit a 4th on it tho unless there is more room that I cant see from the picture. none the less great progress so far

wait are u running 6 amps or is the picture further down just pre carpeting?

my build log here-->https://goo.gl/Qz5uTV
youtube video progress/tutorials and shenanigans
https://goo.gl/xSMdSh
C0ryp1 is offline   Reply With Quote Quick reply to this message
Old 07-09-2017   #17
Upgrade Your Membership!
 
toneloc2's Avatar
 
Member
Join Date: Nov 2015
Location: vernon bc
Posts: 374

Thanks: 11
Thanked 109 Times in 80 Posts
Rep Power: 54 toneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enough


iTrader: (7)



Default Re: 2017 jeep jk slow new build

thanks C0ryp1,,,,, ya there was just know way i could hide that mag, way to shinny,,, still breaking the sub in, to me it sounds great just needed to wire reverse to put 180 out,,,,, and ya no room for the fourth amp need to come up with something, might hide that one with the helix, or just rebuild all....

https://www.diymobileaudio.com/forum/...new-build.html
8201nex dsp pro mk2 director,
zapco 150.6 ap zapco z-3kd-2
gb10, gb25, gb60, 2x gb10d2
toneloc2 is offline   Reply With Quote Quick reply to this message
Old 07-09-2017   #18
Upgrade Your Membership!
 
toneloc2's Avatar
 
Member
Join Date: Nov 2015
Location: vernon bc
Posts: 374

Thanks: 11
Thanked 109 Times in 80 Posts
Rep Power: 54 toneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enough


iTrader: (7)



Default Re: 2017 jeep jk slow new build

latest pic
Attached Images
File Type: jpg IMG_0288.jpg (54.8 KB, 209 views)

https://www.diymobileaudio.com/forum/...new-build.html
8201nex dsp pro mk2 director,
zapco 150.6 ap zapco z-3kd-2
gb10, gb25, gb60, 2x gb10d2
toneloc2 is offline   Reply With Quote Quick reply to this message
Old 07-13-2017   #19
Upgrade Your Membership!
 
toneloc2's Avatar
 
Member
Join Date: Nov 2015
Location: vernon bc
Posts: 374

Thanks: 11
Thanked 109 Times in 80 Posts
Rep Power: 54 toneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enough


iTrader: (7)



Default Re: 2017 jeep jk slow new build

got these little guys today,,,,, thanks to Cory at Andre's,,,, so guess i will be starting the three ways this weekend. looking for some advise,, for those that know what a jeep dash looks like would i be better off to mount the tweets above or beside the mid-range?
Attached Images
File Type: jpg 35.jpg (62.4 KB, 114 views)
File Type: jpg 36.jpg (55.3 KB, 101 views)

https://www.diymobileaudio.com/forum/...new-build.html
8201nex dsp pro mk2 director,
zapco 150.6 ap zapco z-3kd-2
gb10, gb25, gb60, 2x gb10d2
toneloc2 is offline   Reply With Quote Quick reply to this message
Old 07-13-2017   #20
 
Newbie
Join Date: Jul 2017
Location: Canada
Posts: 42

Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 32 C0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enough


iTrader: (0)



Default

Quote:
Originally Posted by toneloc2 View Post
got these little guys today,,,,, thanks to Cory at Andre's,,,, so guess i will be starting the three ways this weekend. looking for some advise,, for those that know what a jeep dash looks like would i be better off to mount the tweets
above or beside the mid-range?
Nice! I'm going to be doing side by side when I do mine. I drove around with a cardboard template of what I think my final size will be over the window in that area for a week and found that vertical impedes the view to much so that's what I suggest you should do. I'm in a compass tho and they have horrible blind spots as it is
C0ryp1 is offline   Reply With Quote Quick reply to this message
Old 07-13-2017   #21
 
Newbie
Join Date: Jul 2017
Location: GA
Posts: 12

Thanks: 0
Thanked 1 Time in 1 Post
Rep Power: 0 collie45 will become famous soon enoughcollie45 will become famous soon enoughcollie45 will become famous soon enoughcollie45 will become famous soon enoughcollie45 will become famous soon enoughcollie45 will become famous soon enough


iTrader: (0)



Default Re: 2017 jeep jk slow new build

Looks a pretty good build. Keep it up
collie45 is offline   Reply With Quote Quick reply to this message
Old 07-30-2017   #22
Upgrade Your Membership!
 
toneloc2's Avatar
 
Member
Join Date: Nov 2015
Location: vernon bc
Posts: 374

Thanks: 11
Thanked 109 Times in 80 Posts
Rep Power: 54 toneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enough


iTrader: (7)



Default Re: 2017 jeep jk slow new build

now i know why its been just over 22 years since i made pods last,,,,,,i guess back then i had more time,,,just put these together this morning,,,,, now the real fun part body filler and a whole lot of sanding....
Attached Images
File Type: jpg 37.jpg (35.4 KB, 158 views)
File Type: jpg 38.jpg (43.8 KB, 157 views)
File Type: jpg 39.jpg (76.8 KB, 166 views)
File Type: jpg 40.jpg (64.4 KB, 208 views)

https://www.diymobileaudio.com/forum/...new-build.html
8201nex dsp pro mk2 director,
zapco 150.6 ap zapco z-3kd-2
gb10, gb25, gb60, 2x gb10d2
toneloc2 is offline   Reply With Quote Quick reply to this message
Old 07-31-2017   #23
 
Newbie
Join Date: Jul 2017
Location: Canada
Posts: 42

Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 32 C0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enough


iTrader: (0)



Default

Quote:
Originally Posted by toneloc2 View Post
now i know why its been just over 22 years since i made pods last,,,,,,i guess back then i had more time,,,just put these together this morning,,,,, now the real fun part body filler and a whole lot of sanding....
Lol I feel you I've been out of the hobby for 3 years and I remember when I was younger I could do a sub build or pods during a long weekend now I'm having trouble finding even a hour here and there where I can work on anything at all
C0ryp1 is offline   Reply With Quote Quick reply to this message
Old 08-05-2017   #24
Upgrade Your Membership!
 
toneloc2's Avatar
 
Member
Join Date: Nov 2015
Location: vernon bc
Posts: 374

Thanks: 11
Thanked 109 Times in 80 Posts
Rep Power: 54 toneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enoughtoneloc2 will become famous soon enough


iTrader: (7)



Default Re: 2017 jeep jk slow new build

got the pillars done and mounted just need to finish up some trim and restart the tuning...
Attached Images
File Type: jpg 41.jpg (95.1 KB, 202 views)
File Type: jpg 42.jpg (92.6 KB, 173 views)
File Type: jpg 43.jpg (60.9 KB, 194 views)
File Type: jpg 44.jpg (70.1 KB, 180 views)
File Type: jpg 45.jpg (50.0 KB, 211 views)

https://www.diymobileaudio.com/forum/...new-build.html
8201nex dsp pro mk2 director,
zapco 150.6 ap zapco z-3kd-2
gb10, gb25, gb60, 2x gb10d2
toneloc2 is offline   Reply With Quote Quick reply to this message
Old 08-06-2017   #25
 
Newbie
Join Date: Jul 2017
Location: Canada
Posts: 42

Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 32 C0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enoughC0ryp1 will become famous soon enough


iTrader: (0)



Default

Quote:
Originally Posted by toneloc2 View Post
got the pillars done and mounted just need to finish up some trim and restart the tuning...
Looking good, have you driven it yet? Do they inpead your view at all. I'm debating to see if I can get my 4's in the bottom of the apillar and the tweets at the dash.
C0ryp1 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Car Audio | DiyMobileAudio.com | Car Stereo Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 12:16 AM.


Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0
Powered by vBadvanced CMPS v3.2.3
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

Ad Management by RedTyger

Home | User CP | Members List | New Posts | ITrader | Faq | Post Spy