I am trying to find speaker wiring info on an PPI A404.What I want to do is try the "mixed mono" feature.I have read all the manuals i could find and while it/they talk about it I havnt found a diagram for using the 2/4 way button,bridging, ect... Basically I have forgotton after 15+ years of being out of car audio how these "art" series can be wired...help
I have the Precision Power P900.4 and I am having a problem setting the gains utilizing a Digital Multimeter. I have the amplifier running a set of Image Dymanics CTX-6.5C w/electronic crossover.
Need your assistance with determing the volts (approximate gain setting) based on running the amplifier in the bridged mode at 450w X 2 @4 ohms. The below information provided at it relates to the speakers specs.
•6-1/2" CTX Series 2-Way Car Component Speaker System
•Power Handling: ◦Peak: 400 watts per set / 200 watts each side
◦RMS: 200 watts per set / 100 watts each side
◦Recommended Power Range: 25-200 watts per side
•Sensitivity: 89 dB
•Frequency Response: 55-25,000 Hz
Also, if utilizing the included passive crossover, should the Front Crossover Selector switch be High Pass, Low Pass, or Band Passover.
I am very intrested in the OS amps. I personally am a OS MTX collector. In particular the BTA and MTA amps. I have 3 bta 2100's 1 mta 250 and 1 mta 225. I don't really need them, and my wife would kick my ass if she knew I wanted to get some more CA stuff. Not that your price is bad by any means, but could you cut me some slack shipped to 37082?
Would you be intrested in a eclipse hu, PDX 100.4 or possibly a UL12?
I am interested in any old BLACK Pro Mos PPI amps that you might be willing to part with. I might also be interested in a black 2200 or 2300 Mosfet series as well. Send me an email to [email protected] letting me know what you have and include a few pics if possible. Thanks!