DiyMobileAudio.com Car Stereo Forum banner

3d print

  1. Technical & Advanced Car Audio Discussion
    In a previous post I showed a design for the 3 way flax set from focal that turned out to make too much of a blind spot off the a pillar so I decided to make them concentric instead. I want to highlight the power of using 3D printing with ABS to easily transform any set of mid and high, combine...
  2. General Car Audio Discussion
    Hi all, Here are some baffles I designed for a vehicle. It's a 3-way active setup using Focal's PS 165 F3 flax series. A 3D printed grille, not shown with its destined grille cloth, accompanies the baffles with small neodymium magnets to replace the need for Focal's grilles and extra mounting...
  3. Fabrication, Tools & Tricks of the trade
    Hey guys! Wanted to share the latest endeavor- I've been slowly building a vacuum table and wanted to log everything. The ultimate goal is to use the device to make molds. Some things to keep in mine- I am not a master woodworker. I simply chose tools and materials that I was comfortable with...
Top