DiyMobileAudio.com Car Stereo Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Technical & Advanced Car Audio Discussion
    When running active is there any reason I can’t install the capacitors at the amp instead of doors? My thought is to keep the door panels as simple as possible. Thanks
  2. Technical & Advanced Car Audio Discussion
    After installing an amp to run my front splits active, and the amp blowing a woofer due to it kindly sending a DC signal ?, I've picked up a set of Hertz Mille Pro MPK 165.3 speakers, with a Hertz DPower 4 amp to run them. I have a Pioneer AVH-Z2050BT head unit, which is capable of a 3-way...
  3. Car Audio Classifieds
    Product Brand & Model: 1) Clarion CZ702 2) THD301 HD Radio tuner module Both were purchased from Crutchfield in January, 2015. Condition of all items: 1) Faceplate in excellent condition, can't find a mark on it other than dust. All buttons work, no sticking, never been spilled on. Harness...
  4. Technical & Advanced Car Audio Discussion
    I have an Alpine MRP-F300 four channel, specs say it can do 50w at 4 ohms and 75w at 2 ohms. I'm running my active two way setup with this amp. My tweeters are 4 ohm and mid bass are 2 ohm (2.2 to be exact). My question is: Since the amp is stable at two and four ohms, can I use two of the...
  5. Technical & Advanced Car Audio Discussion
    CDT ES-02 "Tweeters" (250-20kHz) Rainbow Sound line 6.5" Midbass' (50-4250Hz) Ported 12W6v2 No rear fill Fully active w/ a BitTen D 50W per front driver, 500W to Sub (Alpine MRP) Tweeters are mounted in on axis pvc end caps where the dash and A-pillars meet, mids off axis low in the doors...
1-5 of 5 Results
Top