DiyMobileAudio.com Car Stereo Forum banner
amps
1-20 of 48 Results
  1. General Car Audio Discussion
    I have a Skar Audio RP-2000.1D 2000 watt mono block amp. I have it run to 2 Skar Audio EVL-15 D2 15-inch dual 2-ohm 1250 watt subwoofers. The only way to wire them to this amp is at 2 ohm or 0.5 ohm and the amp it rated at 2000 watts at 1 ohm. At 2 ohm im only getting about 1400 watts so about...
  2. General Car Audio Discussion
    Hey guys, im looking to redo my sound system. I have a 2005 infiniti g35. I had the stock system a few months ago then upgraded them but kinda got ****ed over with trash speakers cause I was dumb and impatient. Now I have powerbass 6.5 speakers and tweeters (connected to the head unit), a boss...
  3. Technical & Advanced Car Audio Discussion
    Hi I am new here but I got a head scratcher I have a 2013 Ford focus SE base model I am using the factory Head unit I have a LOC attached to my rear door speakers for my JL audio JL500/1d but I also have a PROFILE CALIFORNIA CA640 4 channel amp I want to use for the new speakers I am putting in...
  4. System Design: Help Me Choose Equipment For My Car
    Looking for suggestions on my motorcycle: Currently I have 4 Spl hertz show 8" midrange 4 ohm speakers at 200 watts , 4 Spl hertz show 6.5" midrange 4ohm at 150 watts, 4 hertz st35 3" tweeters @100 watts, 2 st25 1.5" hertz tweeters to total 14 speakers with one diamond audio 600 watt rms amp...
  5. System Design: Help Me Choose Equipment For My Car
    I have 2 12 inch phoenix gold xenon x12d2 already boxed ready to go but I am confused about which amp to get for them to run. I think I need 2 ohm 700rms 700watts? I dont know much about this stuff. Was wondering if anyone could help me out.
  6. General Car Audio Discussion
    Hello! I'm incredibly new to this and am looking for some basic must-dos on this project. I have some friends that are going to help me put some subs in my 2017 Elantra and I need some advice on the essentials. The car does have pretty much all of the luxury addons including GPS and Infinity...
  7. System Design: Help Me Choose Equipment For My Car
    I have a power acoustik EDGE SERIES 10000watt amp. It blew out 6 mosfits. I can't find the factory parts (mosfit#'s IRF3205 or P825Y)
  8. System Design: Help Me Choose Equipment For My Car
    I am having trouble determining if my alternator will able to keep my battery charged if I install a Skar Audio 800.1d AMP, with a 600 watt RMS Skar Audio SDR-12 Sub-woofer. Thanks for your time. OEM alternator Output: 110 Amps Skar AMP Class D 800 watt Monoblock at 1 Ohm : Peak...
  9. Technical & Advanced Car Audio Discussion
    Hello everyone! It’s a pleasure to be here my name is Tyler, and I’m a huge BassHead ? now that I’m getting more deeply involved in the Car Audio world with competitions and such I have a situation that I’m having an issue solving and was hoping some experts could point me in the right...
  10. System Design: Help Me Choose Equipment For My Car
    Hi. I just got into car audio and I have a possibly stupid question. Lets say I have two subs rated at 500W RMS each and an amp rated at 1000W RMS. Do the subs share the load, making it a 1000W total or will that overpower the subs? Thanks. :)
  11. General Car Audio Discussion
    hey, im upgrading my amp to 1000 watts and running 4 ga wire, im gonna need a new inline fuse, my amp manual says recommended 80amp fuse rating, should i put exactly and 80amp fuse or would it hurt to use a 100amp fuse? which would be better to use
  12. System Design: Help Me Choose Equipment For My Car
    I'm throwing my hands in the air. I've been researching past threads on this topic for a few hours and am having a hard time seeing consistency in the responses given when people are asking for guidance on power wire selection for a dual digital amp setup. So, I'm throwing this request for help...
  13. Car Audio Classifieds
    Product Brand & Model: Phoenix Gold: Ti2 2000.1, 1000.4, 1000.4 JL HD 600/4 Condition of all items: 2000.1 = 9/10. Used for 6 months. Couple of installation scuffs, including 1 on plexi. 1000.4's and 600/4 = BNIB Total Price: : $1,800 for all or $500 each for the 2000.1 and 600/4, $400...
  14. General Car Audio Discussion
    Hey folks! I'm really interested in your opinions. I just got my dream car and I'm working on getting my dream audio setup in it. I'm a music producer and I worked my way up to Focal Twin6BE monitors in my studio. I love these monitors, and since I spend a lot of time on my commute to work, I...
  15. System Design: Help Me Choose Equipment For My Car
    Hey Everybody. I've finally decided to upgrade the sound system in my lowly 2000 VW jetta. So Far I have a Pioneer 80PRS and 4 130CA1 SG - Focal 5.25" 2-Way Coaxial Speakers in the doors. I feel like I could benefit from a sub. I'm Leaning toward a 10" Sub. I want something punchy and musical...
  16. System Design: Help Me Choose Equipment For My Car
    I don't know a whole lot about this stuff, but I'm not an idiot. I installed a half ass system over two years ago in my truck. I have focal 130a1 5.25 component speakers in the front, and focal 5x7 coaxial speakers in the rear with a rockford fosgate t600-4 amp @ 100watts at 4ohms. I never...
  17. Car Audio Classifieds
    Product Brand & Model: Bid on a Down 4 Sound sponsor shirt signed by Jonathan Price on 11-20-14. This is 1 of 3 others I believe! I won this shirt off a bid that Jonathan Price did back in 2011 and I believe I won it at around $135. I've lost my passion for car audio and I believe this shirt...
  18. Car Audio Classifieds
    Product Brand & Model: A-MPS2500 Completely recapped (all electrolytic caps replaced, new thermal pads), cosmetic wise its about a 6/10. 300.00 B-MPS2500 Completely STOCK near new condition with original box,manual,PG sticker and birth sheet cosmetic a 10/10. 425.00 C-MS2125 Completely...
  19. Technical & Advanced Car Audio Discussion
    Okay, so I have a Kicker 1000w Rms DVC subwoofer, and a FLI 900s 4 Channel Amplifier. I am wiring my subwoofer with all 4 channels in bridged mode (Channels 1+2 to voice coil 1, and Channels 3+4 to voice coil 2). This gives me a decent 225w Rms x 2 (450 Rms) from the amp. I just saw another...
  20. System Design: Help Me Choose Equipment For My Car
    I'm looking for a class a/b SQ or SQL amplifier option, with a subsonic filter, offering up 300-600 watts RMS. Cannot be ClassD, and must have a subsonic filter. Any suggestions? I was looking as Phoenix Gold zx 350 titaniums, but the cheaper the better, without sacrificing SQ. was looking...
1-20 of 48 Results
Top