cdt

Product Brand & Model: Gladen Audio RS 150C2 Two Channel Amplifier Gladen XL250c2 Two Channel Amplifier Helix Esprit E62C 6.5 Inch Component Set Ground Zero GZUC 650SQX 6.5 Inch Component Set PHD FB 6.1 KIT PRO 6.5 Inch Component Set Condition of all items: Gladen Audio RS 150C2 Two...

Hey everyone, Its been a few years but I've finally relapsed back into the audio world with my new (to me) car. I spent the last week building a sub box, the false floor/amp rack, and installing all my old stuff, only to find out that my Rainbow tweeters somehow crapped out sitting on a shelf...

Product Brand & Model: CDT EX550i Series Crossovers, used for two weeks. Condition of all items: Like new. Total Price: : BEST OFFER Shipping Terms: : Buyer pays Pictures: Additional info: CDT Audio EX-550i ** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL...

Product Brand & Model: CDT DRT26A aluminum tweeter pair on braxial brackets that can mount to a mid. Condition of all items: Used for two weeks. Total Price: : BEST OFFER - NEED TO GO Shipping Terms: : Buyer pays, small item though will be cheap. Pictures: - Additional info...

Okay, I have been unable to locate a new set of Alpine Spx-17Pro's So I have decided to go with my original plan of a 3' mid 3 way. The most important aspect of this inquiry is vocal clarity @ moderate to high volumes on RATED power. Im not looking to throw 200-500RMS at a speaker and have it...

I am currently running NVX XSP65KIT and I am just not happy withthe sound. I think it is part due to the oversize tweeter assembly with measure about 2 1/4 inches and only fits in the stock location for the 2.5 speakers in my Chrysler 200 I am looking to run something that still allows me you...

Product Brand & Model: 1. CDT ES6CV 6.5 woofers (two weeks of use) 2. CDT DRT26A aluminum tweeters mounted bracket on woofer frame (two weeks of use) 3. CDT Upstage 2100i system - silk imaging tweeters with imaging crossovers 4. CDT 550 series crossovers (two weeks of use) 5. ID12V3D2 - Image...

I am currently in the planning stage of my new setup I recently purchased a 2013 Hyundai Sonata and it supports 6.5's all the way around and i believe 3.5's or 4's in the dash. setup will be receiving 14.4 volts (upgraded alt, battery, with 0 gauge back.) I am always open to suggestions but...

Product Brand & Model: DLS Reference 8" midbass Aura NS6-255-8A Condition of all items: Used - half inch slice in surround and blemish on cone New Total Price: : DLS - $60 Shipped Aura - $45 Shipped Shipping Terms: : Included Pictures: - Unless you are a Upgraded member, or your last...

Let me start by describing my current system. I've got a Sony DSX-310BTX running to an Audison BitTen D, into Alpine MRP-M500 and MRP-F300 amps, into a 2-way active Rainbow/CDT front stage with a JL 12W6v2 in the back. I used the Sony HU for a while and always thought it could be a little...

I am very new for you folks on this forum and this might be my first thread here. I have been following this forum for quite some time now though and decided to post this first as my earlier build log and then will begin my current one. In India you usually don't see such kind of installs...

I am looking for sound quality. I have a 2012 Toyota Rav4 which I do not plan on putting a sub into. (absolutely no room) Max budget: Around $300 I plan to put these CDT's into my front doors and to run them off of the amp. The rear speakers I will keep stock and use them as fill and run them...

Product Brand & Model: CDT ES-06 midwoofer Condition of all items: As long as it isn't broken, its cool with me Total Price: : cheaper than what I can buy off their site from their backstock price (160 new) Shipping Terms: : We can work something out Pictures: - Unless you are a...

Hi i am Brendon from london and have an on going 1999 BMW 328i individual cabrio project, i have been through loads of different audio to try and find the right sound but will get to that in a minute, first the car. i will let the pics do the talking. when i bought it- then...

Ok here's the deal. I have a Cadence ZRS component set for my front and MB Quart FTA169's for my rear fill. I was perfectly content with this setup until I heard my girlfriends 4inch ID CTX coaxials. They are amazing. Now I am thinking of changing my setup. I will be running the front speakers...

These are my listings, being these are high end 'audiophile' gear, being listed on here would give them much better exposure. Any questions, feel free to ask through here or ebay! HAT L6's (sold individually): Hybrid Audio Technologies Legatia L6 Midrange/Midbass - eBay (item 150630590602...

I am currently looking for a 5.25 component set for my 02 Regal. It will be a direct fit as the Regal comes with stock components. I want to run them off my HU so I want something with a low rms. I am using a Clarion CX201 21rms/channel. My budgets around $100-$140 internet pricing. I have MB...

I searched the forum for FIR crossovers but didn't get much return. Does anybody on here run FIR crossovers? Any comments about them? Thoughts about helping with phase issues or imaging? Some background: I've been running CDT HD-52 midrange (5.25") and DRT-26 tweet in a CDT "braxial"...

Vehicle: 2000 Toyota Tacoma Xtra cab. Currently running 2-way active front stage (CDT CL-62) with the 6.5" midbass woofers run in factory door locations, off axis, w/ MDF spacer rings. Doors [and entire cab] fully deadened. Tweets in the sails (wedge/surface mount) not perfectly on axis, but...

As stated in the title, the customer wanted a reasonably priced 3 way + sub installation. The requirements were not to cut any metal and the door trims had to remain stock looking. Fiberglass piller-pods were requested. And the trunk work had to display the amps, processor and subwoofers...but...