channel

Product Brand & Model: ixos rca GT, but will take others (let me know) need 4 pairs of 3-6 feet Condition of all items: 100 functional like new, appearance: no nicks or cuts Total Price: : you tell me Shipping Terms: : I pay Pictures: - Unless you are a Upgraded member, or your last 10...

Changed setup plan and won't need this amp anymore. Reduced my price from 1,300 to 1,100 recently (off of I believe 1,700 retail) Link: ebay.com/itm/252787975292?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Product Brand & Model: Soundstream REF4.400 4 Channel Amplifier. Rated at 4x70W at 4 ohms. Condition of all items: Good shape, few very fine marks as seen, all insert screws are there, inner shot only to show its all original and in good shape. Total Price: : $120 shipped. ** No...

Okay, so I have a Kicker 1000w Rms DVC subwoofer, and a FLI 900s 4 Channel Amplifier. I am wiring my subwoofer with all 4 channels in bridged mode (Channels 1+2 to voice coil 1, and Channels 3+4 to voice coil 2). This gives me a decent 225w Rms x 2 (450 Rms) from the amp. I just saw another...

I have a pdxf4 and now that my rear deck alpine spr 60's don't work, (long story) I am just running the alpine R components on channel 1 and 2. Now that I have the weekend to work on my system, I'm wondering what I should even do. The components are 110rms so bridging would be 200watts to each...

It is in great shape and is 100% complete and functional. It includes the remote knob, cable and the instruction manual. Real quickly for those of you that don't know what it does: It creates a true center, left and right channels by separating L+R signals and centered information and sends...

My front stage is a set of DLS UP6i comps. that are rated for 150 watts RMS. I am currently running them on 2 channels of an ED Nine.4 amp (about 65-75 watts). Once I get my separate sub amp installed I will have the other two channels available to bridge which will get me about 150 watts. My...

I have been reading all over the forum looking for a decent 4 channel amp to purchase for less than 300. New or old school, either is fine. Zed built is preferable. I have not located any newschool amps within my budget except for cadence, but they are out of stock at the moment on the amp I...

I have a used, but in good condition helix hxa400, i cant find much info on this amp, looks exactly like this amp http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=3425 specs: 4 x 70W @ 4 ohms 4 x 125W @ 2 ohms 2 x 250W @ 4 ohms bridge there is one scratch if you look...

My vehicle, an 06 dodge ram 2500 cummins mega cab, came stock with a 7 speaker infinity system. it has provisions for 3.5ish speakers left, center, and right in the dash as well as the door location for a midbass. What would you guys do with this. if I wanted to run a center channel, how would i...