DIYMobileAudio.com Car Stereo Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. General Car Audio Discussion
    2013 Honda Pilot. My first door panel was super hard to pop back on, I had to remove a lot of CCF. Here's my door process: And I had actually put CCF all over the plastic panel as well, but ripped it all off due to my issue. Basically, my panel was not popping back on. Forget MLV on the...
  2. General Car Audio Discussion
    Not putting MLV on. Want to put CCF tho for rattles. Should I put it on the door, on the plastic door panel, or both? I guess it’s pretty cheap, thinking of doing both.
  3. General Car Audio Discussion
    So I’m going to be putting CCF (closed-cell foam) on my metal inner door panel and inter plastic door panel to prevent vibration noises from the door panel, as well as butyl roping some of the plastic components together, such as the clips. But is it worth it to do the same for other plastic...
  4. Fabrication, Tools & Tricks of the trade
    So I've been researching materials for my upcoming deadening project, and came across this: Uline packing foam It's CCF, made from polyethylene. From reading here, most people like to work with PVC Rubber foam (gym foam), which is easy to bond to the car and to MLV using vinyl cement. The...
1-4 of 4 Results
Top