DiyMobileAudio.com Car Stereo Forum banner

crossover

  1. Strange Passive Crossover Issue

    Technical & Advanced Car Audio Discussion
    Hey guys, first time posting- I recently built and installed my first ever system. 4 channel amp powering a pair of front components and rear coaxials and a mono block powering two 12s. I’ve gotten by ok so far using a multimeter to tune my system ( AC Voltage = Sqrt(RMS*Ohms) ) because believe...
  2. LPF/X-OVER on Secondhand Tweets

    General Car Audio Discussion
    I've been able to find very little regarding the tweets in a 2way/four speaker audio system, from which I was recently gifted the tweeters. Guy didn't have Anything else Left from the system. I found that they originally came with an external crossovers, and yet, no info on the range or...
  3. Focal K2P 2 way crossovers

    Car Audio Classifieds
    Product Brand & Model: 2 Way Passive Crossovers for Focal ES 165k2 component set Condition of all items: Like new, only used for 3 months before deciding to run active. Total Price: : $200 Shipping Terms: : On Me, Lower 48 Pictures: - Unless you are a Upgraded member, or your last 10...
  4. WTB Dynaudio parts 1 MW170 grill, 362 crossover

    Car Audio Classifieds
    WTB Dynaudio parts 1 MW170 grill, 362 crossover, tweeter Product Brand & Model: Dynaudio need 1 MW170/MW172 grill Dynaudio need 1 362 crossover also Dynaudio md102 tweeter or similar (added because the one I had won't work) For center channel in a 5.1 system, thanks! Condition of all items...
  5. Advice on using mosconi 6to8 with 8200nex vs just using built in crossover / TA

    General Car Audio Discussion
    I currently have a 4runner with entune premium, no jbl, running to a mosconi 6to8 and then to an arc audio 1200.6 then to morel 2 way active fronts and mb quart subs. I am going to install a 8200nex in the next day or two because I am unsatisfied with the sound from the entune. I was hoping...
  6. Strange issue with new speaker, sub and amp install

    Technical & Advanced Car Audio Discussion
    Hey all! First time poster here. I have an interesting situation. I have a 2011 VW jetta SEL. The model comes with tweeters in the pillars of the front of the car. I recently bought an entire new system to install into the car, amps, sub, door speakers...everything. I had a professional install...
  7. Door speaker only works when crossover is in proper place

    Technical & Advanced Car Audio Discussion
    Hello everyone - first post! I want to start by saying I have absolutely no background in audio, and am pretty limited in knowledge of my own rig. I got my subs and door speakers/head unit installed for a birthday present when I turned 16 (I'm 22, now), and I don't think I have any of the...
  8. Crossover design

    Technical & Advanced Car Audio Discussion
    Hello I have Alpine DDL - R170S components but I lost the crossover :bigcry: Found this on a Japanese site: Black Film Capacitor BENNIC XPP AC 250V 1.0uF is a polypropylene condenser. The adjacent blue 185 is a 1.8 uF metallized polypropylene capacitor. They are connected in parallel to...
  9. Morel Midbass Passive Crossover Add on

    eBay
    Par of Morel ADMW 9 Crossovers Midbass mid-bass 150hz 12db low pass ADXO No reserve, not sure what they're worth.
  10. Q's about T/A via REW Impulse and Crossover Point Selections

    Technical & Advanced Car Audio Discussion
    Hey Guys, So I currently have a build log/rant/blog going on over here in the Build Log Section. It's all installed more or less wired in and working ok... quick rundown for those who haven't read the log/blog/rant Equipment Android 6.0 Headunit to USB DAC Burr Brown PCM2704 USB to S/PDIF...
  11. control bass from cabin of car

    Technical & Advanced Car Audio Discussion
    Hello everyone. I have an 05 Nissan altima with a stock 8 speaker bose system. I want to keep the stock head unit with the 6 disc cd changer and I have already tapped into the low level leads just before the factory amp and added in an set of RCA's and an aftermarket amp, xover and dvc 4ohm 12"...
  12. FS: Alpine SPX-17PRO 6.75" SQ Component Set! BNIB SQ Classic!

    Car Audio Classifieds
    Product Brand & Model: Alpine SPX-17PRO 6.5" SQ Bi-Amp-able Component Set. Details @ SonicElectronix Condition of all items: BNIB with all Mounting Hardware/Speaker Adapter Rings, Grills, Tweeter Flush & Surface Mount Hardware, Bi-Amp-able X/O's with Phase Modules, etc. For those...
  13. MS-8 Integration with New Amp & Speakers in Factory 2014 Fusion w/MFT

    Technical & Advanced Car Audio Discussion
    New to the forum, and copied some of this information from another member (DanMc85) since my setup is pretty similar. I'm looking for some help to properly setup my JBL MS-8 for integration into my 2014 Ford Fusion Titanium. I’ve thus far ran all new wiring, installed a new center speaker in...
  14. Crossover points

    General Car Audio Discussion
    Hi all, I'm looking for some advice on setting my crossover frequencies. I have 1 x 10" sealed sub, 6" Coax's in the rear doors, Morel Elate 6" splits in the front doors. Not sure where to crossover this setup and what dB/oct slopes to choose. I was wondering if I could get some advice for...
  15. tweeter crossover to amp ?

    General Car Audio Discussion
    >...
  16. Boston Acoustics Z6 Crossovers

    Car Audio Classifieds
    Product Brand & Model: Boston Acoustics Z6 Crossovers. Condition of all items: 8/10 Fully functional and sounding great. Bi-ampable passive crossovers. From a powerful 6.5" component set Total Price: : 150$ Shipped Shipping Terms: : Included in price Pictures: - Unless you are...
  17. JBL MS-8 Crossover Settings? - Looking for Recommendations

    Technical & Advanced Car Audio Discussion
    Hi Guys, I am looking to properly setup my JBL MS-8 to the best of my ability. Sorry for my long first post, but wanted to provide as much info as I had available to me to get settings recommendations. I need to configure the crossover settings on my JBL MS-8 before doing the timing and...
  18. Let's measure the output of a DSP! Crossovers, EQ, Phase etc.

    Technical & Advanced Car Audio Discussion
    I thought I'd start a thread about crossovers, EQ and other filters affect the output and how it interact with the acoustic output of the system. I mostly use MiniDSP nowadays, they are cheap and offers great versatility. For this setup I've simply put the unit between the I/O of my soundcard...
  19. Component Speakers to Receiver and External 4 Channel Powering rear 6x9 and one Sub

    Technical & Advanced Car Audio Discussion
    Here's the gear, DUAL XPR540 Amplifier Kenwood HD455U Receiver JBL Componenet GX600C JBL 6x9 GX963 A 10'' sub I have not yet gotten. Here's the question, Could I, use the 4 channels of the Kenwood receiver to drive the components in this way: Bypassing crossover and making the rear channel...
  20. Choosing tweeter and mid in an active set up

    System Design: Help Me Choose Equipment For My Car
    I am confused as to how you choose speakers in an active set up. (2 way front stage and subwoofer) I have been passive up until now. Headunit: Pioneer DEH-80PRS Amplifier: Alpine PDX V9 to run everything Subwoofer: Blaupunkt sub uncertain on details but sounds good to my ears Currently running...
Top