DIYMobileAudio.com Car Stereo Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 38 Results
  1. Sold Sold

    Car Audio Classifieds
    SOLD: Morel 4” mids. 1” mounting depth, and 60hz fs along with 150 watts rms power handling and 4mm xmax means these can go on an a pillar and crossover to your woofers at 150hz! Distortion was below 1% above 200hz and I crossed them to my tweeters at 2500. Get some real stage height and have...
    $50 USD
  2. General Car Audio Discussion
    Searched the site and read tons of threads, haven't seen anything about this. The master volume on the Dayton dsp-408 app goes to 65 on my tablet, but only 60 on my phone. If I set it to above 60 on the tablet it will stay at that volume. But, if I log out of the app then back in, with either...
  3. Build Logs & Project Install Gallery
    Hello again everyone, it has been a while since I posted here and wanted to say hello once again. I enjoyed the last build log I did here so much that I decided to do the same with the new-to-me 2017 Camry Hybrid I recently bought. I'm currently in the planning stages of the build and am open...
  4. Technical & Advanced Car Audio Discussion
    Couldn't get the ATM to read my UMM-6 Dayton. Eventually found that the level settings in Windows preference wasn't all the way up. I boosted that but still had to get the pop tones in the car at a ridiculous level. I checked my input level in REW and it was reading what appeared to be normal...
  5. Car Audio Classifieds
    Looking for a Dayton 408 dsp preferably with dongle. Have a few items to trade or straight out cash.
    $75 USD
  6. Want to Buy WTB Dayton 408

    Car Audio Classifieds
    Prefer one with remote and dongle.
    $100 USD
  7. System Design: Help Me Choose Equipment For My Car
    I have a 2022 2500HD crew cab that I have all parts and pieces for my build except picking out what 10" subwoofers to get... I have a Helix M One X amp to push them and I have the LMI seat lift brackets so mounting depth isn't an issue, but I do want to get the most bang for my buck. I am...
  8. Car Audio Classifieds
    Bought off a fellow forum member and never used. It’s pretty much mint. Price includes shipping. Paypal preferred, please add 3.4% for fees.
    $110 USD
  9. Car Audio Classifieds
    This is just some stuff I have laying around everything functions perfectly (I can do DMM reading) 250OBO each or 430 for both 2x Scanspeak 12” 30w. 12” Grilles 10$ each Sold pair Morel msw 114 4” 80$ Dayton rs180 SOLD$ shipped Dayton 408 harness bt dongle and remote SOLD$ Single Bowers...
    $123 USD
  10. Car Audio Classifieds
    Dayton RSS210HO-4 Subwoofers in custom MDF enclosures. They are designed similar to the JL Audio 8w7 Stealthbox but even smaller. They go up against the back wall and dont extend past the steel seat brackets. They are constructed from 3/4" MDF, CNC cut, glued and screwed. They have 3/4" Bracing...
  11. General Car Audio Discussion
    Hi everyone! I have a more unique setup in my Altima Coupe, born out of over-ambition and free time (which I don’t have now). Straight to the point my current problem is I fiber glassed midrange pods (more like chambers) that sit behind the footwell carpet with cutout for grills...
  12. Car Audio Classifieds
    Product Brand & Model: 1) Hybrid Audio L1 pro R2 2) Zapco st-1500xm 3) Zapco st-4x 4) Dayton HO 12" DVC (RSS315HO-44) Condition of all items: 1) 10/10 functioning, 9/10 appearance, comes in original box, see pictures 2) 10/10 functioning, 9/10 appearance, comes in original box, see...
  13. Technical & Advanced Car Audio Discussion
    Planning out a new active setup for an E36 coupe on a budget. Plan is to run a Pioneer 80PRS on active for processing. Front stage will consist of a pair of Dayton RS180's in the kick panel and a pair of 3.5" coaxials (JBL GTO329) in the door for highs. I prefer for the RS180's to be crossed low...
  14. General Car Audio Discussion
    Hello, I have a Dayton RSS265HO-44 subwoofer and a winding on the voice coil has come undone & there is slight damage to the aluminum former (picture). Both coils still power the sub and there was no VC rubbing before taking the sub apart, just a rattle from the loose winding. Inspecting the...
  15. Technical & Advanced Car Audio Discussion
    Hi everyone , anyone familiar with the Dayton 10" reference HO sub and kit sealed cabinet enclosure below ? I was thinking about putting 2 of them in my 2014 civic coupe trunk and power them with an Arc or Zapco 500W class D . Would that be overkill ? Maybe just one 12" or even one 10" instead...
  16. System Design: Help Me Choose Equipment For My Car
    Hi I am currently in the process of updating my entire sound system in my 2014 Ram Crew cab. I have read too many threads to count on this subject, and I would like to get a fresh opinion. I understand that most do not use rear fill, but I like the sound. I have narrowed my search down to three...
  17. New Member Introductions
    Hi There! So much great info on this site that I had to register. Very very cool. I will be attempting to do an AW install on my 2013 Prius Two. I'm looking for quality, not volume, and this seems to be the best place to get the sage like advice I need. Here's a real newbie question though. If...
  18. System Design: Help Me Choose Equipment For My Car
    Hello Everyone. I will be doing a build for my cousin this weekend and wanted to share it with everyone here for the opinions. I will be taking a lot of pictures that i will post later. She wanted something that could go loud and stay clear. She wanted some bass but nothing crazy. I went with...
  19. Technical & Advanced Car Audio Discussion
    Long story short is that I'm building a 4th order bandpass enclosure for my car. My plan is to have the enclosure in the trunk and port the box directly into the cab through the rear deck where the 6x9's sit. The theory to my madness is to reduce trunk rattle and overcome certain issues with...
  20. Build Logs & Project Install Gallery
    hey there. putting up a bit of a build log (most of the work is already done). this is Jachin's (Jachin99's) corvette. he helped out and lives local to me. i want a big shout out to my best friend paul (rokusek) for doing a lot of the wiring with me. goals - utilize two amplifiers that he had...
1-20 of 38 Results
Top