DiyMobileAudio.com Car Stereo Forum banner

dsp

  1. FS: Upgraded Arc PS8 complete with PSC controller

    Car Audio Classifieds
    Hey all, I need to move some things so I'm selling my DSP since I'm moving to a MiniDSP. Everything is cosmetically a 9/10 with some dust and light marks on the screen and the DSP shroud. The PS8 has been upgraded with LM4562 OpAmps. Asking price is $450 shipped insured in the continental US...
  2. Rate/Provide Feedback on my Soon To Be F150 Setup

    General Car Audio Discussion
    Hey Everyone, So I've been accumulating audio equipment for my 2018 F150 Lariat the last few months and I'd like some feedback on my plan. Here is everything I've purchased: -ZEN-AUDIO DSP12A-A2B processor seamlessly converts 2018+ Ford factory A²B® (Needed for the B&O system) -AudioControl...
  3. 2 Five Channel Amps

    Technical & Advanced Car Audio Discussion
    I'm in the planning process of a new install in an F150, and I think a have a somewhat unusual setup. I'm using an Audiocontrol DM-810 DSP off my factory radio connected to two Alpine PDX-V9 five channel amps. I have 3-way components in the front, coaxials in the rear and two 10's in a sealed...
  4. Expert electronics PX-8.2 $114 DSP.

    General Car Audio Discussion
    was cruising the web for a affordable equalizer, as my 7 band DQ-61 is missing some major peaks, and I stumbled across the Brazilian DSP stated in the title. i know theres been some good affordable South American brands so thought I’d check it out, was wondering if anyone was familiar with it...
  5. FS: Audison bit One w/DRC (Atlanta, GA) - Authorized, No Missing Parts/Wiring

    Car Audio Classifieds
    Product Brand & Model: Audison bit One 8-Channel DSP with DRC Condition of All Items: Used for around 8-months in an SQ build. Works perfectly. All wiring that it came with is included. Manual and software CD are included (although you should get updated software from Audison's website)...
  6. Pleading for some help - dsr1, JL audio HD amps, alpine shallow mounts

    Technical & Advanced Car Audio Discussion
    Hello everyone. As you can see this is my first post - just signed up this afternoon as I am in desperate search for some help. Any and all input is greatly appreciated. My sig shows the equipment that I am running. I am 99% sure my wiring is good - 4 gauge ofc to each amp (2 runs, yes 1 1/0...
  7. Zapco ST-6X DSP amplifier review with testing

    Member Reviews & Product Comparisons
    Over the past two weeks I have both installed and uninstalled the Zapco ST-6X DSP six channel amplifier. My access to the amplifier is due to my having installed it (and a companion Zapco ST-2000xmII) in a friend’s car, only to remove it six days later. I’ll try to keep this review objective...
  8. Looking for a "tuner" in the Los Angeles area.

    Technical & Advanced Car Audio Discussion
    I apologize if this is the wrong forum for this. Title says it. Helix DSP.3 Mosconi Amps Dynaudio Speakers Cheezy sub (this is the next thing to get an upgrade) Front stage is active 3 way Dynaudio Esotec 362 Rear speakers is being run passive, 2 way esotec 242 set. I'm looking for someone...
  9. Static Noise From JL Fix86

    General Car Audio Discussion
    Been working on an install on my '19 Civic for a few weeks now. I decided to run a JL Fix86 to clean the signal and fix the bass roll-off that is built into the Factory HU. After getting everything set up and multiple attempts/tweaks I consistently get a constant static noise coming from...
  10. Audiofrog GB 3way,Helix DSP PRO/USB/Director,Helix 4ch/1ch Amps,KnuKonceptz Amp Kit

    Car Audio Classifieds
    Looking to sell my 'dream' collection, as I sold the F150 this was intended for and the Bose in the new truck is 'good enough' for the 5min commutes to work. Product Brand & Model: 1. Audiofrog GB10 2. Audiofrog GB25 3. Audiofrog GB60 4. Helix DSP Pro with USB HEC and Director (WILL NOT...
  11. DSP install questions

    Technical & Advanced Car Audio Discussion
    Installing my first dsp. Do these things ever lose their memory? My fear is that the thing could go blank and all of a sudden my speakers would get the full power of my amps all of a sudden. Should I set my gains so the amps are only able to deliver a safe amount of power, rather than control...
  12. Hertz Amp, Audison Bit Ten DSP, Hertz 3 Way Components, Subwoofer Amp!

    Car Audio Classifieds
    Product Brand & Model: 1) Audison Bit Ten 2) Hertz HCP4D 4 Channel Amp 3) Hertz Mille Pro 3-way Component Set 4) Sony XM-GS100 600W RMS Subwoofer Amp Condition of all items: All are in like new condition Total Price: : 1) $200 2) $225 3) $550 4) $175 Shipping Terms: : Shipping is at...
  13. New Mosconi DSP firmware and software 2018.10.xx

    Technical & Advanced Car Audio Discussion
    Hello all, First post here. I have to properly introduce myself, but it's Thanksgiving and I've already had too much wine, so I will avoid that for now. :) I have been lurking here since around February 2018 or so, and have learned an INSANE amount of stuff from you guys! I definitely could...
  14. Single din with FLAC support to feed into a DSP

    System Design: Help Me Choose Equipment For My Car
    I am trying to find a decent single din which will feed into a digital signal processor (haven't made my mind yet on which one to buy but JL Audio TWK88 and Helix DSP.2 are tops on my list at the moment) Currently own an Alpine CDE-123R which I can't complain about except it doesn't play FLAC...
  15. Full system $2300 budget - raw drivers, DPS hi-fi with 15" MTX sub - Help pick mains

    System Design: Help Me Choose Equipment For My Car
    Full system $2300 budget - raw drivers, DPS hi-fi with 15" MTX sub - Help pick mains I'm working on a system with a $2300 budget for a 2013 WRX hatchback. So far the only thing i've purchased is a MTX 7515-44 sub. I'm planning on using a sealed enclosure. I'm looking to use raw drivers and...
  16. Helix DSP.2 Questions in 2012 Ram

    System Design: Help Me Choose Equipment For My Car
    Components are in a 2012 Ram 2500. Uconnect 430n Audison Bit Ten JL HD600/4 Active to DLS Iridium 6.2's (6.5" and 1" two way) JL HD1200/1 Running to 2 Sundown SA-12 I'm interested in replacing the Bit Ten with a DSP.2 and keeping all the other components. The idea would be to later have the...
  17. Dazed and Confused

    General Car Audio Discussion
    Ok guys I need some help with this..So im running 4 morel tempo ultras and right now just 2 tweeters and oushing those is a 4ch zapco st-04x P 480 RMS..now the morels are 120rms 250 peak..but i also have a dsp that im wanting to incorporate into this build..so since i only have 4 ch amp im...
  18. Mobridge DA3 White Noise?? DA3 alternative?

    Technical & Advanced Car Audio Discussion
    Hey team, Has anyone ever experienced a lot of white noise coming out of the DA3? I have a Zapco LX150.6 powering frontstage and when the DA3 outputs are connected to it there is a very noticeable hiss (white noise) that stays constant no matter the output level. Running latest firmware on a...
  19. Audiocontrol DSP Sub Output

    Technical & Advanced Car Audio Discussion
    Does anyone on here have any experience using an Audiocontrol DSP, specifically the DM-810? I am currently have some trouble getting any signal to my subwoofers. MY current setup has the DM-810 connected to 2 pdx-v9 5-channel amps. On the DSP I am running tweeter frequencies using channels 1-2...
  20. Active with Dayton drivers and TPA3118 amplifiers

    Build Logs & Project Install Gallery
    I was running a 4-way active setup with two Pioneer GM-X944 amps. But as the car had aged and power became a bottleneck, I was forced to uninstall the two Pioneer amps and also remove the mighty Infinity Kappa subwoofer. Now I started hunting for a more power optimized amp solution that would...
Top