DiyMobileAudio.com Car Stereo Forum banner

kick panels

  1. Advice needed about front speakers in JBL MS-8 - 7.1 surround sound system

    Technical & Advanced Car Audio Discussion
    I would like some opinions on my current system. I am upgrading my stereo in 2001 Lexus LX 470 (almost the same as a Toyota LandCruiser). This is the last year model with a non-navigation Mark Levinson factory system with 3 ways in the front doors. I am replacing the headunit, amplifiers and...
  2. Oh the magic speaker placement???

    Technical & Advanced Car Audio Discussion
    I have a Landrover Discovery with the 4"components factory. The 4" face each other directly at the thigh of the driver and passenger. The tweeters face down towards the driver and passenger croch. I have the new PPI 3 way component set that will be powered by a Zed Audio Gladius. Heres the...
  3. 5 1/4's with 6.5s

    General Car Audio Discussion
    5 1/4's with 6.5s *Pics* I am custom building my own kick panels in a camaro we are restoring and we are looking to place 6.5's (component) in the front corner of the kick panel flush mounted and 5.25 components right behind them angled back with tweeters right beside them. What is the...
  4. What can I get to put a 3-way component system, plus some, in my car?

    Fabrication, Tools & Tricks of the trade
    I'm going to put a JBL C608GTI MKII component set, an A/D/S 344is midrange driver, and some 1" tweeters in my 2002 Pontiac Grand SE. I know I can put the 6.5" woofers in my doors and I already have a stock place in my doors for one set of tweeters. I've heard of Q-forms and pods, but what else...
  5. MS8 System Design Input Needed!

    Technical & Advanced Car Audio Discussion
    Okay, here's the deal. I'm spec'ing out the layout of my system for my car, and I've hit a question that I could use some input on. First, here's the gear I'll be running Alpine HU MS8 3-way fronts (Focal oem 6.5", Dayton Rs100 4", Vifa xt25 tweet,) 5.25" co-axial center (Hybrid Mirus M51)...
Top