DiyMobileAudio.com Car Stereo Forum banner

mounting

  1. How to angle tweeters that don’t come with an angle-mount enclosure

    General Car Audio Discussion
    Right now I have tweeters mounted on my sail panels that came with a roughly ~45 degree angle-mount plastic enclosure. I would like to upgrade my tweeters to something I can cross much lower. Something like this (just an example): SB Acoustics SB29RDCN-C000-4 Neo Magnet, Ring Dome Tweeter But...
  2. Need advice for mounting amp rack to backseat

    General Car Audio Discussion
    Hey guys. I'm trying to clean up my install by mounting my two amps and DSP on a piece of MDF and then screwing that into my backseat. For anyone that's done something like this before, how did the rack hold up? And would sheet metal screws be the best option?
  3. Infinite Baffle: Forward or Rear Firing?

    General Car Audio Discussion
    Hey guys, Decided to join the IB club. i have a 15" Dayton HF that i plan to put in my car. i see most people pointing the woofer into the cabin but was wondering if there are any con's to pointing them towards the rear. i live in MN so i'm worried about snow or rain possible dripping down and...
  4. WTB: Bluetooth Microphone and Mounting Sleeve for Current Pioneer Head Unit

    Car Audio Classifieds
    Product Brand & Model: Pioneer mounting cage and Bluetooth microphone for current single DIN units. Part numbers: Microphone--CPM1083 Cage--QNC3020 Condition of all items: Prefer new, but used works too. Total Price: : As close as possible to $20 shipped total for both. Shipping Terms...
  5. WTB: HAT Imagine Tweeter Flush Mounting Hardware

    Car Audio Classifieds
    Product Brand & Model: Want to buy HAT Imagine I61-2 tweeter flush mount hardware Condition of all items: Presentable Total Price: : $10 shipped or less? Shipping Terms: : I need these by Friday. Pictures: - Unless you are a Upgraded member, or your last 10 iTrader feedbacks are...
  6. Mounting a baffle to an uneven surface.

    Fabrication, Tools & Tricks of the trade
    Well, the title should explain it pretty well. Here's the problem: I have some SLS 8's going into the doors, and the area surrounding the factory speaker hole is very uneven. Mostly it's on the same plane but there are a couple low spots that are about .75-1" lower than the rest of the area...
  7. mounting amp on enclosure?

    Technical & Advanced Car Audio Discussion
    ive heard mixed rumors/claims/opinions that this is bad. what is yalls opinions? ive done some searching but cannot find anything but conflicting opinions and no real evidence. the reason i ask is bc i had 2 cadence txa600.4 @ 25" wide each, ima have problems mounting both, one will likely...
Top