Car Stereo Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Technical & Advanced Car Audio Discussion
    About to finish my install and I noticed the tweeters and manual make no mention of polarity on the provided leads. I figured out the woofer ones by looking at the board in the crossover, but the tweeters don’t have that. Anyone know? Focal Flax PS165F
  2. Technical & Advanced Car Audio Discussion
    I’ve been trying to become a little more educated on phase shifts and the effect crossovers have on phase, and to take a break from all the reading wanted to try playing with phase on my current amp to see if I notice a change. I saw someone said that most bridgeable amps are actually marked...
  3. General Car Audio Discussion
    I've just started to upgrade my factory door speakers to new ones, and while I have my front two door speakers wired and installed, I've learned that these two along with the factory rear speakers are ALL out of phase... Is this normal for a Kia? Because I wired my new speakers with positive to...
  4. General Car Audio Discussion
    Can you use a multimeter to determine polarity on wire that is unlabeled (potentially while music on)? Wires were connected to factory rears to run to amp high level in. Those bare wires will power a test 5x7, just unsure of polarity when wiring my high level adapter.
1-4 of 4 Results