DiyMobileAudio.com Car Stereo Forum banner

ported enclosure

  1. Port placement questions? SQ installation

    Technical & Advanced Car Audio Discussion
    Port placement questions? SQ installation I am putting two AudioFrog GB10D2 at 4 ohms in a divided enclosure. The inside dimension of each side of the trapezoidal enclosure is roughly 22"T x 22"W and 8" Bottom and 4" Top. Outside dimension is 23.5"T x 46.25" W and 9.5" Bottom and 5.5" Top...
  2. Looking for SQ subs designed for ported enclosure.

    System Design: Help Me Choose Equipment For My Car
    Like it says I'm looking for a SQ 12 specifically designed or at least performs best in a ported enclosure. 4ohm dvc 300-750 watts rms. Preferably up to 2 cu/ft range for the box. I own a Focal 33v2 polyglass and am looking to replace it. Great sub very accurate and natural sounding. Doesn't get...
  3. idea for "box" in doors...

    General Car Audio Discussion
    I searched for ideas and answers, but found nothing... Basically my idea is to use the stock door speaker mounts and close them in with fiberglass or something to make kind of a small "box" for my mids in the doors. Does this sound like a good idea or a bad idea? I have an 01 eclipse with...
  4. JL 12w6v2 in 1.7cu', ported @ 33hz... X-Over & Subsonic?

    Technical & Advanced Car Audio Discussion
    I'm about to run Alpine's imprint software on my cda-9887 and had this other thread going about: enclosure specs I have two JL 12w6v2 woofers in this dual 1.7cu foot, ported enclosure, tuned to 33hz. I'm feeding the subs a bridged 1000 watts @ 4ohms from a Zed Audio Kronos, half gain, no bass...
  5. Sealed or Ported?

    General Car Audio Discussion
    Sealed or Ported? Whats better sounding and better for your sub?
  6. Sub Box Design

    Fabrication, Tools & Tricks of the trade
    I recently upgraded my JL Audio 12W3 to a JL Audio 12W6. The 12W3 was in a ported box built by a local shop. The dimensions are 17.5"x13"x16" (WxHxD) and the port is 2.5" wide 11.5" high and 11.75" deep. With my amplifier settings all set at stock still and my head unit at 0 for subwoofer EQ it...
  7. Subwoofer Box Design

    System Design: Help Me Choose Equipment For My Car
    I recently upgraded my JL Audio 12W3 to a JL Audio 12W6. The 12W3 was in a ported box built by a local shop. The dimensions are 17.5"x13"x16" (WxHxD) and the port is 2.5" wide 11.5" high and 11.75" deep. With my amplifier settings all set at stock still and my head unit at 0 for subwoofer EQ it...
  8. Subwoofer Box Design

    General Car Audio Discussion
    I recently upgraded my JL Audio 12W3 to a JL Audio 12W6. The 12W3 was in a ported box built by a local shop. The dimensions are 17.5"x13"x16" (WxHxD) and the port is 2.5" wide 11.5" high and 11.75" deep. With my amplifier settings all set at stock still and my head unit at 0 for subwoofer EQ it...
  9. 12w6v2 Ported Enclosure 33 htz - New Sty;e Civic

    Build Logs & Project Install Gallery
    Guys I built this box for a guy per his request. It is a very simple ported enclosure for a JL 12w6v2. Let me know what you think. Please give me some criticism, but be polite about it. I am having trouble linking, so I am going to type the link, please copy/paste...
Top