DiyMobileAudio.com Car Stereo Forum banner

power acoustik

  1. Need help with set up and have questions.

    General Car Audio Discussion
    I have a Power Acoustik Razor Class D 2,500 watt amp, with 2 Memphis PR 12" 300/600 watt. I have the amp gain set on half, Sub Sonic on 35ghz, Bass Boost off, and Low Pass on 250ghz. I have the amp grounded to the frame and hooked to the ez jump positive cable under the hood. The box the subs...
  2. Power Acoustik Apache

    Old School Car Audio Discussion
    I just recently saved an old school Power Acoustik 2APC-2200 from the scrap yard. This thing is an absolute mammoth, it's as long as a USA-400 and almost twice as thick. Unfortunately it's missing the whole input/xover board and end cover but I have an idea to get it working again. Also know a...
  3. Protect Mode troubleshooting? (Power Acoustik amp)

    Technical & Advanced Car Audio Discussion
    Hi everyone, I swear I searched the forum first and I couldn't find anything so I registered for DIYMA and here we are! Short story: Disconnected subwoofer, while loose in the trunk the positive and negative subwoofer wires crossed, now (Power Acoustik) amp remains in Protect Mode, and no...
  4. Pioneer Avic N3

    General Car Audio Discussion
    Hello all!!! I'm new here and have a question. I have a 96 Audi A4 Quattro. It had a factory headunit, I believe it was the concert radio. This unit also to my surprise, had a stock 20 watt amp connected to the driver side rear speaker. I Purchased new door and rear speakers, brand Scosche Hd...
Top