DiyMobileAudio.com Car Stereo Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Technical & Advanced Car Audio Discussion
    My amp is continuously going back and forth in and out of protect mode. The sub isn’t blown, It has enough resistance when pushing it in, and it makes no scratching noises when doing so. It did the same thing in my old vehicle which I sold, bought a new 0 gauge wiring kit, and redid the process...
  2. General Car Audio Discussion
    Having a problem with going into protect mode at around 12 of 30 on volume. Ran a polk audio 800 for years now changed to all alpine equipment ran all new cables and issues began. Put the Polk amp back works fine Alpine back in lights dim a little and goes in protect mode? Can a weak ground on...
  3. General Car Audio Discussion
    I'm hoping someone can help me diagnose this problem so I don't have to send the amp off for repair. Any thoughts would be appreciated. I have a ZAPCO ST-1 driving a pre-boxed 8" JL sub and two ZAPCO ST-4X's driving the main speakers in my truck. The ST-1 and the ST-4X's are all powered from a...
  4. Technical & Advanced Car Audio Discussion
    Hi everyone, I swear I searched the forum first and I couldn't find anything so I registered for DIYMA and here we are! Short story: Disconnected subwoofer, while loose in the trunk the positive and negative subwoofer wires crossed, now (Power Acoustik) amp remains in Protect Mode, and no...
1-4 of 4 Results
Top