DiyMobileAudio.com Car Stereo Forum banner

settings

  1. MS-8 Integration with New Amp & Speakers in Factory 2014 Fusion w/MFT

    Technical & Advanced Car Audio Discussion
    New to the forum, and copied some of this information from another member (DanMc85) since my setup is pretty similar. I'm looking for some help to properly setup my JBL MS-8 for integration into my 2014 Ford Fusion Titanium. I’ve thus far ran all new wiring, installed a new center speaker in...
  2. JBL MS-8 Crossover Settings? - Looking for Recommendations

    Technical & Advanced Car Audio Discussion
    Hi Guys, I am looking to properly setup my JBL MS-8 to the best of my ability. Sorry for my long first post, but wanted to provide as much info as I had available to me to get settings recommendations. I need to configure the crossover settings on my JBL MS-8 before doing the timing and...
  3. What should my next move be now?

    Technical & Advanced Car Audio Discussion
    I have a pdxf4 and now that my rear deck alpine spr 60's don't work, (long story) I am just running the alpine R components on channel 1 and 2. Now that I have the weekend to work on my system, I'm wondering what I should even do. The components are 110rms so bridging would be 200watts to each...
  4. Need help with Alpine Pdx f4 and alpine spR 65 speakers

    Technical & Advanced Car Audio Discussion
    Pdx f 4 amp powering type r components up front and coax in the back. I also have the alpine 149bt head unit. I have no subs, so would I leave the amp crossover on full range? Or set up a high/low range with proper frequencies? What's really weird and frustrates me is I swear everytime I drive...
  5. Equalizer settings to reduce vocals, increase music

    General Car Audio Discussion
    I have a kenwood x796 head unit, which has a 3 band parametric equalizer. I would like actual instruments and music to be more noticeable than vocals. My head unit has a mid adjust feature with bands at .5k, 1k, 1.5k, and 2.5k. It also has the q factor and level adjust. What are the best...
  6. Configuring Audison Bit One processor Advanced Dynamic Equalizer

    Technical & Advanced Car Audio Discussion
    OK, I now really need someone's expert advice and/or answer to let me know what am I missing or doing wrong here. Here is my setup: BMW CIC Navigation (head unit) connected to mObridge DA2 digital converter via (MOST network cable - optical), which is then connected to the Audison Bit One...
  7. jl audio c2600x tweeter attenuation?

    General Car Audio Discussion
    What tweeter level attenuation do you suggest I set them to? -3db, ref, +3db. From factory they are set to ref or 0db. Is there a common choice or is it personal taste, can any of the settings wear out the tweeter more?
  8. Help with my JL AUDIO System??

    General Car Audio Discussion
    Hi guys I have just bought a JL audio system for my car (Nissan Pulsar 2001 sedan) This is what I got installed: *JL C2600 splits (front) *JL C2600 (back) *JL Audio JL CP212-W0v2 - Twin 12" Subs *JL XD400/4 (for the speakers) *JL XD600/1(For the Subs) *JVC KR926bt (Head unit) The...
  9. Request help w/ JL Audio 300/4v1 Amp

    General Car Audio Discussion
    I'm fairly new to setting up car audio. I've physically installed all of the components below, wired the amp, and have music playing. The left and right channel seem the same, when I fade towards the left or right, I can still hear some sound coming from the faded side. The tweeters sound like...
  10. Crossover adjusting advice needed

    Technical & Advanced Car Audio Discussion
    Hello everyone. I have an old-school Alpine CDA-9833 unit in my G35 coupe. I love this unit even til this day. I love the built in 3-way active crossover. Let me state my equipment so that you guys can offer some suggestions to help me improve the sound in my car. I know this is a very...
  11. Crossover Settings, RS100 + RS225 + VC100

    Technical & Advanced Car Audio Discussion
    Hey all! I am simply wondering what your suggestions would be for my current setup for crossover points and slopes. Im having a hard time tuning it and some input here could really help. My setup is a JVC Arsenal 8240 12" in the rear in a 1.5cu.ft. sealed box, one RS100 and RS225-4 in each front...
  12. H701 Crossover Settings Help

    Technical & Advanced Car Audio Discussion
    W505 w/ H701 Front: Dynaudio 342 (using DYN passives) Rear: Dynaudio 242 (using DYN passives) Subs: JL 10W6's Front Amp: MCC404M Sub Amp: JL 1000/1 Front 2L HPF: Front 2L LPF: Front 2R HPF: Front 2R LPF: Rear L HPF: Rear L LPF: Rear R HPF: Rear R LPF: SubW HPF: SubW LPF...
Top