DiyMobileAudio.com Car Stereo Forum banner

shallow

  1. iLX-W650

    General Car Audio Discussion
    I noticed that Alpine released a few new head units at CES this year. The one that caught my eye is the iLX-W650 - it's a 2-DIN shallow (2.4" deep) unit. It'd be almost perfect for my car with some custom fabrication of the bezel. Feature wise, it seems to check the right boxes for me. It...
  2. Stereo Integrity BM mkIV - 2 of them

    Car Audio Classifieds
    Product Brand & Model: Stereo Integrity BM mkIV 12" Subwoofers. Condition of all items: These are like new, bought them during the presale and never ended up being able to use them. Planned on trying to put one in the footwell of my Z4, but the diameter was still just too large to work...
  3. FS:Pioneer AVIC-Z140BH, TS-D1720C, TS-D1002R, TS-D6902R, GM-D7500M, GM-D9500F, + MORE

    Car Audio Classifieds
    Product Brand & Model: 1. Pioneer AVIC-Z140BH (updated to 2013 map update) 2. Pioneer TS-D1720C 6.75" 2-way components (doesn't come with 6x8 adapters or tweeter mounting hardware) 3. Pioneer TS-D1002R 4" 2-way coaxials (were ran as a mid-range with a custom crossover network, nothing was...
  4. AM DB9 Sub Replacement

    System Design: Help Me Choose Equipment For My Car
    Hi, I'm lucky enough to own (an older) Aston Martin DB9, it has the upgraded 950W 12.1 Linn sound system which has received a lot of flack on Aston forums, but I think it’s a bit harsh. Actually the mids, highs and imaging is pretty good - the bass however... I've had all the trim out and was...
  5. Shallow head units (<6" deep), vintage or modern. Anyone know of any?

    General Car Audio Discussion
    I'm looking for a head unit, vintage or modern, that's DIN in width and height, that must install in less than 6" of depth. I've searched the hell out of this to no avail, so I hope someone here has some ideas. Apologies if I'm posting in the wrong place or to the wrong crowd... it's been a...
  6. FS: Massive Audio SX6 6.5" Shallow Coaxial Speakers, want to sell fast

    Car Audio Classifieds
    Product Brand & Model: Massive Audio SX6 1.66" mounting depth These were the first set of speakers I put in my current car and I replaced them after a few months with CDT Audio components. These are amazing for a low budget upgrade. One of them might make a good center channel. Condition of...
  7. Choosing a subwoofer

    System Design: Help Me Choose Equipment For My Car
    Hey everyone, I was hoping I could get some advice on choosing a sub (or 2). I have an 04 CC silverado, box is going behind the seat (2001-2007 Chevy Crew Cab Non HD Poly Sub Box - Car Audio Factory -). Specs that the sub must have: 1) appropriate for 0.8 ft^3 2) mounting depth of 4.5" or...
  8. Like New Shallow pioneer 12 TS-SW124

    Car Audio Classifieds
    Item(s) for Sale: Like new Pioneer TS-SW124 Item(s) Description/Condition: 12 inch shallow mount subwoofer 300W rms 1200W Max 4ohm only 3 1/4 mounting depth required. was used for approx two weeks until the tear down of the vehicle then was put into storage. more pictures upon request...
  9. FS: MB Quart RLP304 12" Low-Profile Subwoofer

    Car Audio Classifieds
    1. Product: 1 qty. BNIB MB Quart RLP304 12" Low-Profile Subwoofer $70 paypal shipped CONUS 2. Specs: 3. Description/Condition: BNIB 4. Price: $70 paypal shipped OBO CONUS 5. Pictures: Lots of CACO Ref's: SOLD TO: orangelss, SPY, 98GMC, MLyons-Jr (2x)...
  10. Looking for a shallow mount 5.25

    Technical & Advanced Car Audio Discussion
    I am currently running 5.25 in my car for midrange duty (300-4000). I am considering a new installation which either requires a more shallow speaker, or a smaller one. I only want to step down to a smaller speaker as a last option due to decreased dynamics, from what I understand. My current...
  11. Anyone Make Pre-Fab Su b Boxes for Kia Spectra5?

    Technical & Advanced Car Audio Discussion
    So I just bought an 06 Kia Spectra5 and I was looking to put some Thump in the Trunk. The only thing is, I don't want to sacrifice space... So I was wondering if anyone has made or knows of someone who makes Pre-Fabricated Sub-woofer enclosures for between the rear Fender Well and the...
  12. Pre-Fab Sub box for '06 Kia Spectra5?

    Technical & Advanced Car Audio Discussion
    Has anyone dabbled in making a box that fits between the rear fender well and the rear hatch in a 2005 and newer Kia Spectra5? if so, please post pics and a possible price. Also, can anyone tell me how much SqFt that would be? (See picture) I'm thinking of an SI BM Mkiii Shallow mount but I...
  13. SI BM mkIII T/S's

    Industry Shop Talk
    I know this is weird, but our server is down right now. However, when it comes back up we will have posted the T/S's on the new BM mkIII subwoofers on our forum. As soon as we post them on our forum I will post them here in this thread. You know what, screw it. Here you go: The below...
  14. Feeler: Illusion Audio CH-1 horns and nd-8's FS

    Car Audio Classifieds
    I have a pair of Illusion Audio CH-1 horns that were used for about 2 months, and a BNIB pair of nd-8's that are BNIB, and meant for .4ft3 sealed enclosures. The 8's will include two 3/4" mdf fabrication rings that I made, and the optional grills that Illusion offered for the 8's. I have been...
Top