Car Stereo Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. System Design: Help Me Choose Equipment For My Car
    Smello! i’ve seen a bunch of install videos on the tube of you from peeps like Caraudiofabrication and Fivestarcarstereo and others that use the good ol’ fast rings. but I’ve also seen these silicon speaker baffles pop up from time to time……...
  2. Technical & Advanced Car Audio Discussion
    I recently bought a 3D printer and am looking to use it to make some new speaker baffles for the midbass door speakers in my F150. Does anyone think it would be worth my time designing them to angle the speakers (aim them at the dome light)?
  3. General Car Audio Discussion
    I know this has been done before; i wanna see what others takes are on these? Im thinking if you sound proofing the entire door/doors with the same type of fast foam you will get a better sound, i saw a vid online where they did the entire door and it looked great! Thats the link to the vid I...
  4. Fabrication, Tools & Tricks of the trade
    I am going to try and install my 6.5" JBL C608GTI MKII's this spring break and I need some help building a speaker bracket/mount out of MDF so I can mount them in my doors. I'm going to be putting these in a 2002 Pontiac Grand Am SE; it has 4x6" sock mounting holes, 1-2" from the mounting hole...
  5. System Design: Help Me Choose Equipment For My Car
    Im putting a JBL C608GTI MKII comp set in the doors of my 2002 Pontiac Grand Am SE. I have 4x6" stock mounting holes so I'm gonna have to either customize the door frame or build a speaker adapter plate. I have about 1-2" from the mounting hole to the windshield and about 3" from the mounting...
1-5 of 5 Results