DIYMobileAudio.com Car Stereo Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 26 Results
  1. Car Audio Classifieds
    Up for sale are " TWO " Arc Audio X2 2500.1 amplifiers. Both are BNIB still sealed from the factory Prices are USD $900 EACH o.b.o ====PRICE DROP $700 each==== My primary residence is Sarnia, Ontario Canada - which borders Port Huron Michgan Shipping will be quoted with insurance
    $700 USD
  2. Car Audio Classifieds
    Model: Gladen XL 250C4 Condition: used - very good 8.5/10 cosmetically Payment/shipping: $400 USD PayPal Friends and Family, shipping included to CONUS Additional Information: I used this for about a year and half, I'm the second owner. I had channels 1-2 running midbass with 3-4 bridged to...
    $400 USD
  3. DIY Home & Pro Audio
    Hi. I'm actually building sub for my home but there is a problem. I can't find decent 1ohm capable amp that is enough power for Rockford Fosgate T3S1-19 sub. PA equipments seems to go only to 2 ohm and this sub is 1 ohm. Currently I found Helix C One [HELIX C ONE] but it's 1000W RMS seems to be...
  4. General Car Audio Discussion
    Hello i have a question i got 48VCWR122 was wondering if the amp would be running at 1 ohm or 2 ohms right now i been looking at purchising NVX NDA102 which is 750 at 1 ohm but 500 at 2 ohm.will this be ok to pair with the box?
  5. Technical & Advanced Car Audio Discussion
    I picked up an oscilliscope/DMM to be able to check my sine waves from the head unit and amps to make sure I was not clipping. I found where my head unit clips using multiple test tones. 80hz for subs, 800 hz for mids, 10khz for tweets. All good there. I set the gains on my PPI 4200AM for mids...
  6. General Car Audio Discussion
    Hello, hope everyone is having a good day. I need a bit of help. I have a kicker loaded enclosure, 2 ohm (48VCWR122), single 12 compr. (500rms-1000peak), and I have 2 choices of amps. a audiopipe APMN-1300 for $130 or a Nemesis audio NA-2km for $140 I've been thinking of going Nemesis but want...
  7. General Car Audio Discussion
    Hello,kind of new to this so i have been thinking so i wont need to route another power cable to a second amp if i put a Distribution Block before it hits the amps i will be running speaker amp (infinity primus6004)+sub amp (kicker 500rms/1000peak(would be running 4 gauge to it)) just was...
  8. System Design: Help Me Choose Equipment For My Car
    I'm running an old school Zed era (1988) Hifonics Odin pushing two Kicker CVR 10" in a sealed box. It sounds killer. The bass is clean, punchy and warm. The only problem is the amp gets HOT. Way too hot for comfort. So I'm thinking of getting a good class D mono amp - but I'd like to stay old...
  9. System Design: Help Me Choose Equipment For My Car
    Hi folks, first time posting here. Thanks in advance for any advice. I'm trying to finish up my first build. I've got a '21 4Runner, with Audiofrog GS25 in the dash and GS690's in the doors in big thick mounting rings, and have deadened the crap out of the doors. I'm going to run it active...
  10. Car Audio Classifieds
    Up for sale from my last build... Zapco Z-400.2 Fantastic Class A/B SQ amp, with tons of power. 4ohm: 2 x 400 watts 2ohm: 2 x 670 watts Bridged 4ohm: 1 x 1350 watts Performance: 10/10 Appearance: 9/10 I used this amp for a pair of 8" mid bass. Tons of headroom, never broke a sweat...
    $350 USD
  11. General Car Audio Discussion
    Hello group. Quick question. I have a aftermarket powered subwoofer that I've hooked up to my OEM sound system using a LOC. I've tapped my L/R of the LOC to the factory subs in the back. When I run my RCA from my LOC to the sub, the sub stops working when I plug them all the way in. But it'll...
  12. General Car Audio Discussion
    Hi Guy, & Gals. My name is Matthew & I'm new here. I have a question about my 2005 Honda Civic DX 1.7L & the aftermarket HeadUnit (Sony MEX-4300BT) & 2 Kicker 6x5's KS full range up front & two same exact ones in back only those are 6x9's. I bought a 8in 600 watt 150RMS sub with amp built in &...
  13. Car Audio Classifieds
    Used for just over a year, this amp produces 2500 watts at 1ohm, 1400 at 2 and 750 at 4. This is a very nice class H amplifier. Minor scuffs on surface as shown in photos but could be removed with ease. Functionality is 10/10. 500.00 + buyer pays shipping and fees.
  14. General Car Audio Discussion
    I have a Clarion XC6140 and a Wolfram o-2400.1d amp. I bought both for roughly $200 + tax each. The Wolfram I ordered a while back, and phoned to cancel the order shortly after.. but I ended up getting it on my doorstep yesterday anyways, so now I have both these amps. I guess I'll be...
  15. System Design: Help Me Choose Equipment For My Car
    Hey guys I’m in the middle of looking for another sub and amp to add to my setup. I’ve kinda been all over the place looking at like skar, planet audio, Rockville, kicker, etc. I’m looking for a 12” preferably 4ohm with dvc and hopefully something that can handle some power. Amp wise I’ve more...
  16. Technical & Advanced Car Audio Discussion
    Hi whoever you are, I’m pretty new to this whole thing. I get the basics of it for the most part, at least I think I do. Anyway I’m in the middle of building a homemade sub box. And I’m more on here to make sure what I’m gonna get will actually work. Right now I own two 10” 4 ohm Mtx thunders...
  17. General Car Audio Discussion
    So I recently added a subwoofer, amp and a new head unit to my 2008 Jeep Wrangler. I also have The kicker speaker upgrade which are 2 door speakers and 2 sound bar speakers rated at 75w rms each. My new head unit is a Sony XAV-AX5000 and I’m unable to turn the volume up past half without the...
  18. Technical & Advanced Car Audio Discussion
    I have 2 dvc subs that are 2.5 ohm is there anyway i can use them if bridged to amp that is 4 ohm stable and also what variations can i get besides at .5 ohm
  19. Car Audio Classifieds
    M1000.2 SOLD 1 x 1000 Watts RMS @ 2Ω Class D Amplifier I used this mini beast for about 1 month. I was humbly using it to power 2 Stereo Integrity BM mkV subwoofers wired together for a 2ohm load spreading 1000 watts to 500 watts per sub. The amp barely needs its gains turned up to deliver...
1-19 of 26 Results
Top