DiyMobileAudio.com Car Stereo Forum banner

subwoofer enclosures

  1. Anybody have Opinions on 10W3v3 Boxes??

    General Car Audio Discussion
    hey so i have 2, 10" W3v3-D4 subs, going to be running off a 1000 watt, JX1000/1d, 500 watts per sub. does anyone have first hand experience with these subs, and what do they sound best in SQ wise, ported or sealed? when i plug data into WINisd they dont have a very wide frequency range...
  2. NEED HELP PLEASE

    Fabrication, Tools & Tricks of the trade
    Not sure how to use the box design programs and can not find one that works on Mac anyway. I need a box for an Expedition. It will be one box but two chambers. The first will house a 15" MoFo and the second will house (2) Sundown Audio 12's. Mofo- MOFO-152X Fs 24.07 Qms 6.103 Vas 3.761 Xmax...
  3. Cardboard Subwoofer Enclosures Are Better

    Fabrication, Tools & Tricks of the trade
    For several years now I have been using a cardboard material called "chipboard" to form fiberglass parts for subwoofer enclosures. The chipboard is non corrugated and available in two thicknesses. You can find it at most any upholstery shop or upholstery supply. I have found a thousand uses...
  4. HAT hybrid audio imagine 10 in sub and 300 watt amp plus, what encousure

    General Car Audio Discussion
    I already have a pair of 6.5 mirus speakers in the front doors of my car. It is a 2005 Saturn ion 3 quad coupe. I plan later to put the mirus in the back shelf and add some better speakers in front, maybe the Unity, and at that point I would get a second amp for the sub and use my current one...
  5. Carpeting for a 2000 Mercury Grand Marquis LS

    Fabrication, Tools & Tricks of the trade
    Hello everyone, Does anyone know where I can find factory and/or matching carpet for my sub-woofer enclosure that's located in the trunk of a 2000 Mercury Grand Marquis? Thank you in advance!
  6. Open air/Reverse Mounting a sub?

    General Car Audio Discussion
    Hey all, So I was given a very small 10" sub box, and also a mediocre Polk Audio 10" sub. I installed it in one of my cars and gave it 300 Watts to see how it would sound, not expecting much. As I assumed, not much came out of it and from the driver's seat (4 door sedan) I could barely hear it...
  7. 2013 Mustang System

    Build Logs & Project Install Gallery
    This is a Mustang we did recently. Equipment: Audison Bit Ten Hertz HDP5 Hertz HSK165 AudioMobile Elite 2212 This is a setup we have done many times with the Hertz HX250d, but in this case the dimensions of the sub changed the dimensions of the enclosure too much, and we were dying to try out...
  8. Enclosure Design

    General Car Audio Discussion
    Ok, so i am trying to regain some of my trunk in my 96 civic and wanted to make a stealth styled box that would be flush with the floor across the entire trunk, i have two 380 rms svc 12" sony's that require just around 1 cubic foot per sub as of now they are in a ported box with a tuning...
Top