DiyMobileAudio.com Car Stereo Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Technical & Advanced Car Audio Discussion
    Looking at a few options that have this. Saw it get recently added to the JL Audio Tün software and see it as part of the Audison virtuoso 3.0 software. What other amps and processors do this? I have an Audison prima ap8.9 which I am installing soon. Sounds like it does not do this. Really...
  2. General Car Audio Discussion
    First post here and new to the forum, apologies if covered elsewhere. Question on gains and target curves for active 4-way SQ setups. Most curves I’ve looked at depict a 12-15 dB roll off from subs to highs. Does anyone use differing test tone levels to set gains and would this help build in a...
  3. General Car Audio Discussion
    Here is my frequency response in REW (note that the sub is off. These are separate L-R readings. The tweeters are on an active crossover @ 3.5kHz) See how the 100-300Hz range for the midrange speakers is much lower than the 400Hz-3.5kHz range? So that makes me wonder, when EQing, do I boost...
  4. Technical & Advanced Car Audio Discussion
    Here is an example of my front speakers frequency response (Sub off. tweeters and mids are on active crossover @ 3.5 kHz). As you can see, the 100-300Hz range of my midrange speakers is much lower than the 400Hz-3.5kHz range. So do I EQ the 400Hz-3.5kHz range DOWN to this level, with the...
1-4 of 4 Results
Top