DiyMobileAudio.com Car Stereo Forum banner

wiring harness

  1. Technical & Advanced Car Audio Discussion
    I just finished crimping my wires today and finished matching the correct colors. I will be installing my wiring harness to my brand new Apple Carplay / Android Auto touchscreen aftermarket stereo tomorrow. This is a DIY project. I finally learned what all the colors mean for each of the wires...
  2. General Car Audio Discussion
    Hi, I am trying to install an Alpine 445u amp with a new Sony stereo. I have found all sorts of diagrams online for this seemingly simple installation. But, I am confused about how power gets to the stereo! The diagrams show power going to the amp, speakers being attached at the amp, the blue...
  3. General Car Audio Discussion
    I am installing a new head unit in my 2002 pontiac grand am, it has the monsoon sound system so it hasn't been exactly the easiest install. I have bought and wired up my Metra GMRC-01 wiring harness with my aftermarket head unit wiring harness. I used crimp connectors on all my wires to ensure a...
  4. General Car Audio Discussion
    Need Help with stereo wiring - sorry about that in the title currently on my 95 honda accord i have a jvc kd-g310and i decided it was time to upgrade so i got a boss 506UA and i didnt think of the wiring so i got it today and i realized that the jvc has this 18 9x2 pin connector and the one that...
  5. General Car Audio Discussion
    newbie question- Since I'm using an external amp for my speakers, is it better to not connect the speaker wire positives and negatives on the wiring harness and just cap them, or can i just solder and heatshrink them anyway? does it matter? thanks ahead of time :)
  6. Technical & Advanced Car Audio Discussion
    ok so i think this is advanced enough for this forum. heres my problem I own a 2001 Audi A6, with a bose symphony stereo which i seemed to have murdered. i took it apart and now it doesnt power up. if someone knows ways to trouble shoot that that would be the best solution for me. so for now...
  7. General Car Audio Discussion
    Need some help here. I have a DVI-9990 and PXI-H990. I believe the setup came with 2 cables. I now have one connected between the HU and the PROC. The other cable was unfortunately damaged in the build. I'm trying to get a replacement for the damaged cable if it's available. Q1. Does anyone...
  8. General Car Audio Discussion
    I have an older JVC KD-SX780 that has been sitting in the garage for a while and I lost the wiring harness. I was wondering if any DIYMA members knew which pins correspond to which wire on the harness so I could just push some speaker wire into the pins. I've done it before with an older Coustic...
Top