DiyMobileAudio.com Car Stereo Forum banner

Status
Not open for further replies.
1 - 20 of 55 Posts

·
Registered
Joined
·
118 Posts
Discussion Starter #1
Product Brand & Model:
2 OZ Matrix Elite 10s (D2), rated @700 RMS each, will easily take 1000 RMS of clean power
Sealed box [made for them], dual chamber, recessed baffle

Condition of all items:
Subs are 10/10 Mech, 9/10 Cosm
Box has never been used, needs some carpet, no holes in it

Total Price: :
Subs --> $320 shipped OBO
W/Box [Have no idea on cost to ship box] --> $365 shipped OBO
Box Only --> $60 shipped

Shipping Terms: :
Included in Price

Pictures: - Unless you are a Upgraded member, or your last 10 iTrader feedbacks are positive, you must post a picture of the exact item you are selling.










Additional info:
Need gone ASAP!

** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
------------------------------------------------------------------------------------------

Please be advised, all buyers and sellers are responsible for performing their own due diligence when considering any financial engagement. We recomend that you:

1) Check the iTrader feedback of the person you are dealing with on this site, as well as other car audio forums.
2) Ask for a name address and phone number. Call them and verify their info.
3) Valid e-mail address. Correspond before committing.
4) consider using an escrow service to protect yourself.

DO NOT proceed with a deal until you are completely satisfied with the other party.

DIYMobileAudio & Collova Media Inc. is not responsible for the outcome of any transaction on this site and will not moderate on your behalf.
 

·
Registered
Joined
·
118 Posts
Discussion Starter #5
Really motivated to sell these, make an offer!
 

·
Registered
Joined
·
118 Posts
Discussion Starter #6
Offer up! Will trade one for 50ft. of some good 0 Gauge.
 

·
Registered
Joined
·
118 Posts
Discussion Starter #7
Up! Need these gone! $310 shipped for subs!
 

·
Registered
Joined
·
118 Posts
Discussion Starter #8
Great SQL subs! Need these gone --> $300 shipped!
 

·
Registered
Joined
·
118 Posts
Discussion Starter #9
No love for these beauties? :(
Up!
 

·
Registered
Joined
·
118 Posts
Discussion Starter #10
$295 Shipped! Take these! A lot of interest, but no money :/
 

·
Registered
Joined
·
118 Posts
Discussion Starter #12
Do you have the T/S paramiters on these?
I do not... I have looked for a while never and never found them.
This is what I found:

10"
Impedance Dual 2 Ohm / Dual 4 Ohm
Power Handling (RMS/Peak) 700/1400
Sensitivity (1W/1M) 84 dB / 85 dB
Frequency Response 20-500 Hz
Xmax (mm) 25 MM
Fs (Hz) 35 / 36
Mounting Depth 6.5"
Mounting Diameter 9-1/8"
Voice Coil Diameter 2.0"
Enclosure Recommendations: Sealed : 0.8 CuFt / Ported : 1.25 CuFt
 

·
Registered
Joined
·
118 Posts
Discussion Starter #14
Make an offer! Need these gone to finish my build :(
 

·
Registered
Joined
·
118 Posts
Discussion Starter #16
Man if they were D4 I'd SERIOUSLY consider them but D2 just won't work out for my setup :(
At the price I am trying to get on these, an amp reconsideration is in order. Lol.

$290 shipped!
 

·
Registered
Joined
·
118 Posts
Discussion Starter #18
They're very nice woofers but... I don't think so lol. It took me FOREVER to find the matching beauties

I could still use them but they'd see half the power & those things would want more.
What amps are we speaking of?
And run them at .5, after rise you will be at 1 ohm. :)
 

·
Old School Veteran
Joined
·
227 Posts
What amps are we speaking of?
And run them at .5, after rise you will be at 1 ohm. :)
Earthquake 40UHC Gold & it's matching sister 6600XM

Not gonna happen. One of the things you guys don't take into account is yeah there's impedance rise because of the box... But there are also dips. I'm not gonna gamble with an extremely rare 15 year old amp.

But I am contemplating them still. It'll do a modest 600RMS @ 2 ohms & really that would be enough for me. I'm not an spl guy at all.
 

·
Registered
Joined
·
118 Posts
Discussion Starter #20
Earthquake 40UHC Gold & it's matching sister 6600XM

Not gonna happen. One of the things you guys don't take into account is yeah there's impedance rise because of the box... But there are also dips. I'm not gonna gamble with an extremely rare 15 year old amp.

But I am contemplating them still. It'll do a modest 600RMS @ 2 ohms & really that would be enough for me. I'm not an spl guy at all.
Not gonna lie, those are pretty amazing! Lol. And yea, I dont run that low, was just saying. You could always keep the gains down. But let me know, I am sure we could work something out. Maybe you have a spool of 0 gauge laying around? Lol.
 
1 - 20 of 55 Posts
Status
Not open for further replies.
Top