[RickWilson]

I have reconfigured this first post to serve as a table of contents for previous builds and brief summary of the current build. Please see Post #2 for the build introduction.

Table of Contents:

• Build #1 - Infinity Reference-9630x 6x9, Infinity Kappa 62ix, Dynamat
  • Post #2 (click)
• Build #2 - Infinity Reference-9630x 6x9, Infinity Kappa 62ix, LC4.800, LLJ Custom Harness, JL Audio Powered Subwoofer
  • Post #3 (click)
• Build #3 - Audiofrog G60S, Audiofrog GS62, JL Stealthbox w/ 2 12TW3-D8 Subs, JL XD 1000/, Audiocontrol LCQ-1 LOC/EQ
  • Post #4 (click)
• Build #4 - Audiofrog GB 60/15, GS62, Helix V8 DSP Amp, Helix P One Sub Amp, Conductor w/ Custom Mount from @DeLander, Resonix CLD + CCF, Soundskins Pro SSK Kit, Topping D10S
  • Post #5 (click)
• Build #5 - BLAM Multix 3 Way/Vanguard Dash Pods
  • Post #90 (click)
• Build #6 - Morel Piccolo v2, Morel MM3
  • Post #170 (click)
• Build #6A - MTI Pillars for Piccolo + MM3
  • Post #193 (click)
• Build #7 - Mosconi Pro Amps, Helix DSP Pro mk3, Audiofrog GB12x2, MTI Stage 2 Enclosure
  • Post #309 (click)
• Build #7A - Vanguard Dash Pods v2 for Mids, Valicar Pillar Pods for Tweeters, Blackhole Tiles and Block Off Plates
  • Post #414 (click)
• Build #8 - Focal Utopia Front Stage
  • Post #486 (click)

Current Build (Update in Progress):

• Front Stage
  • Accuton Automotive C30 AM - Tweeters
  • Accuton Automotive C100 AM - Midranges
  • Focal Utopia 8WM - Midbass
• Rears
  • Audiofrog GS62 - Differential Rear Fill
• Subs
  • 2 x Audiofrog GB12D4
  • MTI Stage 2 Box (3.0 CF net)
  • 2" LMI Seat Lift
• DSP/Signal
  • Helix DSP Pro mk3 w/ Conductor
  • Topping D10S (Audioquest Pearl USB and Optical)
  • LLJ Customs Harness (High Level) for Phone Calls/Chimes/Navigation
• Amplification
  • Mosconi Pro 5/30 #1
    • Ch 1/2 - Tweeters
    • Ch 3/4 - Midrange
    • Ch 5 - Left Sub
  • Mosconi Pro 5/30 #2
    • Ch 1/2 - Rear Fill
    • Ch 3/4 - Midbass
    • Ch 5 - Right Sub
• Power/Wiring
  • 0 AWG KnuKonceptz Kolusus Flex OFC
  • 16 AWG OFC Speaker Wiring
  • 10 AWG OFC Sub Wiring
  • Stinger Distro Blocks
  • Resonix Solderless RCA System
• Sound Treatment
  • Resonix CLD/CCF/Blackhole Tiles - Doors, Backwall, Floor
  • Resonix Fiber Mat - Headliner
  • Soundskins Pro Door Kits
• Custom Fab Work
  • Vanguard Automotive Design - Pillars and Dash Pods
  • @DeLander for UHMW Speaker and Conductor Mounts
  • MTI Acoustics Stage 2 Enclsoure
  • DIY Amp Rack

Wiring Diagram:

Current Build Photo Highlights:

Front Stage (Update in Progress):

Amp / DSP Rack:

Subs and Enclosure:

Conductor Mount:

 

[RickWilson]

Introduciton - Going to be a long read but hopefully enjoyable to follow along with my rapid descension into the rabbit hole of car audio.

Finally had made arrangements to find a new 2021 6.2L AT4 in Satin Steel Metallic that had a confirmed delivery date to our local GMC dealer. This is a company truck for our family construction business. As most people know, inventory is literally nill nowadays and getting any sort of options on your vehicles (esp. GM trucks) cause major issues with delivery times. We found this truck with production spot but was coming with no options added but the basic AT4 trim is still decent enough. Love the truck and have had 3 of the previous Sierra body types. The 10 speed is fantastic and finally the interior are getting refreshed.

Before I jump into the audio side of this post, I wanted to briefly show what other mods have been done to the truck:

Exterior:

• 20x9 Fuel Vector Wheels
• 275/60/R20 Michelin LTX Defender Tires (Drive 99% on road and the stock Duratracs are noisy af/also have Nokian winter tires)
• Magnum Headache Rack
• OEM Off Road Running Boards
• Illuminated Black Front GMC Emblem
• Black Rear GMC Emblem
• Black CarbonPro AT4 Emblems
• Black OEM Exhaust Tips
• Truxedo Lo Pro Tonneau Cover
• Bed Mat
• Xpel PPF on Front Bumper, Hood

Interior:

• ProClip Phone Mount
• OEM All Weather Mats

Mechanical:

• S&B Cold Air Intake
• Pulsar LT Programmer
• J&L Oil Separator

On to the audio side of my journey:

I knew I was going to make some level of audio upgrades because the truck was not coming with Bose system and regardless, the Bose system is a sad system in itself. So I began to research. Hadn't upgraded car audio in anything except high school, had an Infiniti QX4 with Alpine HU, Kicker 700.5, Some Kicker Speakers and CompVR10 Sub. So I started by setting a budget - initially wasn't planning on a sub, just speakers and an amp only and put $1500 as my goal. Long term, boy was I naive on my wants vs price of components.

I went Crutchfield and started a convo with an agent an was able to put together a system that seemed to check all my boxes. I was very, very green at this point and wasn't doing a ton of my own research or talking to many experienced installers. We had spec'ed a system with an amp but I needed to sort out a way to get my HU signal back to my amp. I eventually found LLJ Customs out of Arizona who specializes in custom wiring harnesses. They make a full plug and play wiring harness that intercept the 4 high level speaker outputs under the glove box and provides a long harness to mount your amps anywhere in your vehicle. I got the Loopback option which also includes an additional set of speaker wires that use the OEM speaker wiring without splicing, it is a massive time saver. I also had them added an extra set of speaker wires for my tweeters as I was going to keep my crossovers out back with my amp. Overall a great investment for someone who wants plug and play DIY, just take 5-6 weeks to get.

NavTV still isn't offering their module still, so this was my choice. I run digital now for music but still will use this as my analog source for chimes/nav/factory BT.

Build #1 - Speakers and Deadening Only (waiting for my LLJ harness)

• Infinity Reference-9630x 6x9 - Components, Front
  • Installed the woofer only during this phase
• Infinity Kappa 62ix - Coaxial, Rear
• Dynaliner CCF on outer shells of doors
  • It took me months recognize this is useless without CLD
• Dynalliner CCF on inner side of plastic door panel
  • Again probably helping with rattles but not resonance
• Dynamat Xtreme at Speakers
  • Added some butyl rope to seal mounts and SoundSkins Rings

Inifiniti Drivers

Conclusions - To be honest, made a kick ass value oriented build. Had I actually used some CLD on outer and inner door shells, this would probably satisfy the average user. They are sensitive speakers and play most anything you throw at them. For running off just the HU, it was much better than expected.

 

[RickWilson]

Build #2 - Add Powered Sub, Speaker Amp, Amp Rack, Wiring Harness

• AudioControl LC4.800
• JL Audio Powered Microsub 8"
• LLJ Customs Wiring Harness
• Amp Rack
• Tweeters from Infiniti 6x9 set

In between the time I got the speakers installed and the time from receiving my harness I had done enough research to convince myself that I wanted to add a sub to my system. I set on finding the most simple solution and ended up settling with the 8" JL Powered Microsub. I was going to build a small amp rack to house my distribution blocks and mount my amps and crossovers.

I had bought the LC4.800 already from build one. Not a bad amp at all.

Got my harness:

So I began my amp rack design and fab (my carpet job was TERRIBLE), Mocked up with foam and then rack built from MDF and marine carpet.

Wired up as much as possible before install

Installed!

Not the best job looking back but was happy with my first DIY set up in almost 15 years. This system sounded really solid, again, for its value. But the deeper I began to read, I realized that the home audio audiophile in me knew there was much more potential out there. And this is what began my revolving door of changes and some dumb decisions, I have learned from them but man, I should have slowed my roll during the next couple of builds.

Build #2A - 10" Powered Sub and Bass Knob

• JL Audio ACP110LG-TW1 Powered Sub
• JL Bass Knob

The 8" just wasn't reaching the lows and output I was looking for and ended up exchanging the 8", 250W RMS with 10", 400W RMS version and it was well worth it. The 10" ported after break in does incredible for it's size. Also added the JL bass knob out front.

8" vs 10"

Bass Knob - clean and easy

 

[RickWilson]

Build #3 - New Speakers, Amps, Subs...well mostly everything.

• Audiofrog G60S - Components, Passive Front
• Audiofrog GS62 - Coaxial, Rear
• JL Stealthbox w/ 2 12TW3-D8 Subs @ 2 ohms
• JL XD 1000/5
• Audiocontrol LCQ-1 LOC/EQ
• Deadening and LLJ Harness from previous builds

I was in my return window w/ Curtchfield (this formed a bad habit) and decided to take the plunge into what I felt was the "next level" for the system. I read a ton of great things on the AF GS set and wanted a sub box that had 2 quality subs and some room to mount the amps/components I wanted. The Stealhbox hit these boxes and fit like a glove. This system, had I gone with a DSP in lieu of the LCQ-1, I think would have probably been enough for me. It sounds damn, damn good. Warm, accurate and deep and I have very basic understandings of crossovers or tuning at this point. I used a IMM-6 and the phone RTA, some O scope work and felt I had it dialed for what I had at my disposal. I was going to just buy a DSP to finish it off but my truck hit a deer and then I decided to move to Build #4 on the next post. But first, the handful of pics I have of Build #3.

Update: Wanted to chime on a more in depth review of this system:

G60S - For the money, these crossed at 80 hz handled anything I could throw at them. They are the pretty much type of sound I was aiming for - just warm enough but very accurate and detailed. 6" are fairly low in the GMC doors and the tweeter is off axis in the dash corner facing the windshield (stock location is a ~2.5" wideband). My only gripe are the external crossovers, if you keep your crossovers back with your amps, you end up with a clump of wiring and 4 small boxes to store as they don't mount with anything besides VHB/Velcro.

GS62 - Not a ton to say, they are popular for a reason. Clear, powerful and easy to install.

JL Stealthbox w/ 2 TW312-D8 - Wired at 2 ohms, I have had them on 600 W from the XD1000 and 750 on the HD750 and they hit harder than I will ever need. To be honest, I never got the crossover and gain dialed in well to scale well with volume but with a DSP and pro tune coming, I am very optimistic to get some more accuracy and depth from this. The enclosure is solid as a rock (as expected with fiberglass) and is shipped beyond well. I think I would have been just as happy with an MTI box as well but liked the price and open shelf area to mount my amps. Avoiding removing the rear seat cause it's a production on the GMCs, and as a company truck, trying to avoid too much custom fab that's not removable.

JL XD1000/5 - Tiny rectangle of power - worked like a champ for me, just outgrew it. Highly recommend.

AudioControl LCQ-1 - Worked well as an LOC, though it was sensitive to input voltage aka if I went one number above my max undistorted HU volume, the unit would shut off and cycle back on. Pretty sure this was more my inexperience with setting gains at this point. Has some EQ built in but it is only 6 bands a channel and does help but barely. I tried thinking this would replace the reason I wanted a DSP but it wasn't the answer long term.

Overall, this system was extremely enjoyable once it broke in a bit. With a Helix DSP Mini, I think this a sweet truck system that's very simple to install and tune.

New components

Stealthbox and amps in from passenger side

Driver's Side

XD1000/5 and LCQ-1

 

[RickWilson]

Build #4 - AF GB Active, Helix V8 + P One + Conductor, Resonix, Digital Signal

• Audiofrog GB 60/15 Active - Front Stage
• Retain GS62 - Rear
• Helix V8 DSP Amp
• Helix P One Sub Amp
• Conductor w/ Custom Mount from @DeLander
• Resonix CLD + Leftover CCF - Exterior Door Shell
• Soundskins Pro SSK Kit - Interior Door Shell
• AppleCCK/Topping D10S/Audioquest for Digital Input
• ABS Speaker mounts from @DeLander

This is really going to be my build for the remainder of the year. I started working with @SkizeR about halfway through these purchases and feel confident in this being a superb 2 way active set up with a great foundation for a future 3 way set up later this year or next year. Probably trying BLAM's S200.300 to get some 2 ohm power from the V8.

I have done some work planning my black ABS amp rack and can share some work I have been doing @DeLander . I should be getting this all installed this upcoming weekend and will autoEQ for now and have Nick tune it remotely once we get some free time.

Amp rack that will live in my Stealthbox mounting pocket

Mocked up conductor mount location

The CAD plan I shared with Todd aka Delander

First renderings

Cut 2 sets in case I mess one up

Shaped and ready to ship. I will be painting these with SEM black once I get them glued and sanded to fit.

And lastly the speaker mounts for the GB60s, GB15s and GS 62s

I will be updating as I get this next step installed! Cannot wait!

 

[MythosDreamLab]

Not sure about the "Future", but what you have done looks great!

Any word on how it sounds?

 

[slowride]

clean truck, I'm digging the wheels. and like you some of us have learned the same way, buying stuff before figuring out what we really want to accomplish. part of the diy mindset I guess. can't wait to see your next iteration.

 

[RickWilson]

Thanks to both of you. Will get some more detail posted here soon. And also share where we are heading with future 3 way configuration.

 

[clange2485]

Great write up, hopefully this will help some people in the future as these trucks start to become more available. Couldn’t help but laugh at the revolving door (which is all of us) and the bad habit comment towards crutchfield. Seems like you’ve finally found the correct path, happy to hear you got your truck back to and it looks great!!

Looks like DeLander knocked it out of the park once again.

 

[RickWilson]

Great write up, hopefully this will help some people in the future as these trucks start to become more available. Couldn’t help but laugh at the revolving door (which is all of us) and the bad habit comment towards crutchfield. Seems like you’ve finally found the correct path, happy to hear you got your truck back to and it looks great!!

Looks like DeLander knocked it out of the park once again.

Hahaha yup. Definitely have learned to slow my roll when in to comes making major purchases. At least this time around I feel I’m well set up for a 3 way without having to make major equipment changes. Thanks again for you early help too.

Still waiting for the truck from the body shop sadly, should be be middle of this week.

Todd has been awesome, anxious to see his work once it ships here early next week.

 

[clange2485]

Hahaha yup. Definitely have learned to slow my roll when in to comes making major purchases. At least this time around I feel I’m well set up for a 3 way without having to make major equipment changes. Thanks again for you early help too.

Still waiting for the truck from the body shop sadly, should be be middle of this week.

Todd has been awesome, anxious to see his work once it ships here early next week.

Mines out of commission at the moment to, Thanks to the lifter issue also got a new tcm so hopefully that does something for that pos 8 sp.🤞

Bought a range earlier to disable the afm. Amazon delivered it in under 2 hrs which is pretty incredible, wish i had a truck to put it in!!

Keep us posted, Can’t wait to hear your thoughts about revision 4.0

 

[TitanCCBT3]

Nice work

 

[RickWilson]

Mines out of commission at the moment to, Thanks to the lifter issue also got a new tcm so hopefully that does something for that pos 8 sp.🤞

Bought a range earlier to disable the afm. Amazon delivered it in under 2 hrs which is pretty incredible, wish i had a truck to put it in!!

Keep us posted, Can’t wait to hear your thoughts about revision 4.0

That's right, forgot you had your lifters go, I'm crossing my fingers I don't deal with them. The AFM delete helps more than expected and I had my 8 speed re-flashed like three times to help it out.

Still waiting on a few pieces to the build aka the mounts and amps but everything ships towards me Monday. Very very excited to get it all back up and running. Been using my dad's lifted 2018 wrangler and want to shoot myself from the handling and noise pollution it has lol

 

[OzAudioGmc]

A bit off topic but have you guys with the 8 speed had the fluid updated per the bulletin that came out a while back? I found it helped more than expected. Also, try turning OFF grade braking and turn ON trailer mode, it changes the shift points on definitely tamed the shifting significantly.

 

[RickWilson]

A bit off topic but have you guys with the 8 speed had the fluid updated per the bulletin that came out a while back? I found it helped more than expected. Also, try turning OFF grade breaking and turn ON trailer mode, it changes the shift points on definitely tamed the shifting significantly.

Tow mode certainly helped and had the new fluid but never tried grade braking off. On to the 10 speed now but I would be curious to try the grade braking.

 

[clange2485]

A bit off topic but have you guys with the 8 speed had the fluid updated per the bulletin that came out a while back? I found it helped more than expected. Also, try turning OFF grade braking and turn ON trailer mode, it changes the shift points on definitely tamed the shifting significantly.

i got the fluid changed about 2 1/2 yrs ago and it really helped but after 30k miles or so it’s starting to get a little clunky again. Thanks for the tip, hopefully i don’t need it but it’s something to try.

 

[RickWilson]

Updated some comments on Build #3 for anyone interested

 

[RickWilson]

Dropped by my body shop a few minutes ago and got confirmed I’ll have my truck Friday for the deer hit. Hit a deer running out of the median on I-95 six weeks ago.

Heading into paint in about an hour.

 

[OzAudioGmc]

Glad to hear your truck will be fixed soon! I live in the country and see this frequently. It's always amazing how much damage they can do. Hope it's as good as new when you get it back!

 

[RickWilson]

Glad to hear your truck will be fixed soon! I live in the country and see this frequently. It's always amazing how much damage they can do. Hope it's as good as new when you get it back!

Yeah it blew me away, roughly 19k in damage when said and done. Seems like the antler got hooked in my headlight and then it tumbled down the side of my truck while I was doing about 70 mph .

C'est la vie but she's all painted now.