[cam2Xrunner]

Does the DCX2496 have Phase control? Or is there another name for it being used on the DCX2496? Thanks

 

[npdang]

Phase adjustments in 1 degree steps. Download the software and try out all the functions

 

[BBOYSTEVIE]

PLEASE!!! Not to nag or rush, but any idea when the power supply may be ready for sale? I need to know if this is an option for me or not and I'd rather not do the experimenting with other supplies to try to get it right. Any idea???

 

[npdang]

I want to say 1 month, but don't hold me to that.

 

[BBOYSTEVIE]

I won't hold you to that....as long as it comes out before the ID-1 (j/k). Thanks for the guesstimate. In one month my summer begins, so if it's any time around there, even 1 month late, all will be good. Will you be selling the unit w/ power supply or an add on power supply?

Thanks again!

 

[BBOYSTEVIE]

Sorry if this is a repeat ?..main think I need to confirm...One of these units will do an active 4 way setup, right? (tweet, mid, midbass, sub)

 

[xDeLiRiOuSx]

Npdang, when you do get the powersupply worked out. How much would it be for the complete DCX2496 with modified power supply?

Thanks
David

 

[10K2HVN]

Sorry if this is a repeat ?..main think I need to confirm...One of these units will do an active 4 way setup, right? (tweet, mid, midbass, sub)

6 outputs / 3 pairs of outputs / 3-way crossover / tweet, midwoofer, subwoofer.

i wouldnt worry about it too much.. if you have a HU with subwoofer control (which most hu's have), then you can run the tweeter, midrange, and midbass off the DCX2496 and the subwoofer off the subwoofer control of the HU! :wink: 8)

 

[cam2Xrunner]

Sorry if this is a repeat ?..main think I need to confirm...One of these units will do an active 4 way setup, right? (tweet, mid, midbass, sub)

6 outputs / 3 pairs of outputs / 3-way crossover / tweet, midwoofer, subwoofer.

i wouldnt worry about it too much.. if you have a HU with subwoofer control (which most hu's have), then you can run the tweeter, midrange, and midbass off the DCX2496 and the subwoofer off the subwoofer control of the HU! :wink: 8)

That's what I'm doing.

 

[npdang]

I plan on making the power supply as affordable as possible. It will be DIY to install, but shouldn't involve more than soldering a few wires and mounting the pcb inside the unit. There will be pictures and detailed instructions, and it's really very straight forward.

I won't be selling the dcx2496... simply because I've seen it online and on Ebay for less than my cost. So not much point in that The same with the Canare star quad cables. I'll have a tutorial on how to install and use the device soon enough that should answer everyone's questions.

 

[cam2Xrunner]

Phase adjustments in 1 degree steps. Download the software and try out all the functions

Awesome!!!

 

[MIAaron]

Sweet! That's really cool of you to do. I've been thinking about going with one of these dang behringers to. I have a dsp1124 for my ht sub, might as well give it a go in car to.

 

[newtitan]

so where in the heck are you behringer folks mouting these things?

I have a h701 ready to install, but I keep reading that these things are nice (and cheaper )


and is this powersupply ready yet? havent seen any threads on it lately


sorry for bumping the old thread

 

[tokyofist]

power supply

from this thread:
http://www.diymobileaudio.com/forum/viewtopic.php?t=196

i just pm'd him on this matter. I'm not sure if he wants me to disclose the ultra top secret information he revealed to me so i will keep my mouth shut. lmao

i'm sure he'll chime in.. i have no clue when it's coming out though.